TV Receiver User Manual

Initial Setup
17
Receiver Presetting
Your receiver is factory pre-programmed to receive the ASTRA
(19° East/28°East) and HotBird satellites, as well as Eutelsat 10E and
16E, TurkSat 42E, Telecom 5W and 8W, and others. You do not
normally need to make any additional settings. If you are not
connected to a communal system, you will need a multifeed
arrangement with at least two LNBs in front of the satellite dish in
order to receive multiple satellite systems. Consult your specialist
dealer on this.
Before you change the basic settings of your receiver, write down the
settings on the form provided at the end of this operating manual. You
will then be able to restore the original settings at any time.