TV Receiver User Manual

Channel List

This section describes how you select TV programmes with your

receiver and how you can set the desired volume.

The description of the functions assumes that the receiver has been

properly connected.

If you wish to connect up the receiver yourself, please read the

“Connection and Setup” section first.

Selecting a TV Programme

Reception Status

The following information describes how to select other programmes

and what the on-screen displays look like.

To select additional TV programmes in ascending or descending order

in the programme memory, simply press the



buttons after turning on

the receiver.

Every time you press the button, an on-screen display shows you the

selected programme together with the time, the programme start and

end times and the programme title on an info bar, provided the

relevant data is being broadcast.

You can permanently show or hide this info bar by pressing the



button.

Encrypted programmes are indicated by the message “Encrypted

channel”:

To view these programmes you will need an authorisation

card - a PCMCIA card or Smartcard - from the Pay TV provider

(see “Common Interface” section).

The CA module and Smartcard are not included in the supply

package.