TV Receiver User Manual

Hard Disk Recorder
50
The asterisks stand for the recording number. At the end of the
playback, the receiver switches back to the “HD programme guide”.
If you are recording at the time, the display remains “REC 1” or
“REC 2”.
Drive functions can be accessed with the following remote control
buttons:

= Visible/time-controlled rewind

= Visible/time-controlled fast forward

= Normal playback

= Freeze-frame; with

or

freeze-frame or
picture-by-picture (only if control console is not
displayed; if control console is displayed advances
10 seconds at a time!)/unlock with


= Hard disk programme guide is displayed; playback is
stopped; with

playback is resumed

= 4-speed slow-motion during playback
(red button)
The symbol for the current function is displayed in the bottom left-hand
corner of the screen.
During playback, you can get all necessary information by pressing
the

button. At the top left of the bar the programme being played
back is indicated. To the right of it, a progress bar indicates how much
of it has been played back so far.
The symbol for the current selected playback function appears at the
left, and next to it the current playback time and total duration are
displayed.
Important! The 4-speed slow-motion function cannot be selected
when the control console is displayed on the screen during
playback.