TV Receiver User Manual

Software and Programme List Update
85
You can move the light-coloured cursor bar using the

and

or

buttons to select the item you want to deactivate (No). Items that
are already inactive cannot be changed. If you only want to update the
software but leave your channel list alone, deselect the “Channel List”
field, or vice versa. You can also request “Info Text” only.
To update, move the cursor bar to “Start” and confirm with

. The
receiver then begins the update and displays the following message
where applicable:
Once the update is complete, the receiver is re-initialised and starts
operation again. In case of an error or no signal, the message
“Download failed” appears.
Never turn off the receiver during the update process, as otherwise
you could lose the entire software. If this happened, the receiver
would have to be re-installed at the factory or using a PC and zero-
modem cable. During the download “Please wait” flashes on-screen.
Pay attention to all
on-screen displays!
Following a software
update you must reset
Winter/Summer time as
appropriate!
Y
ou can also download
the updates from the
Internet, at:
http://www.kathrein.de/
esc-kathrein/englisch/
download/ufd/
firmware_ufd580.cfm
After the “Display Info”
request an on-screen
display appears which you
should use as a guide.