Technical data

936.3222/-/1207/3.8e
2.3 Selecting the input symbol rate
Select the “Symbol rate” parameter.
Set the desired symbol rate between 2.000 and 45.000 MS/s.
Setting is by using the scroll button or by inputting the fi gures.
I 1236 MHz 27.500MS
TV Das Erste deu
Outp. CH12 244.25MHz
Auto Vol+0dB AV
27.5 MS
2.4 Choosing between TV or radio programmes
Select the “Ra/TV” parameter.
Set the desired type of reception using the scroll button.
I 1236 MHz 27.5 MS
TV Das Erste deu
Outp. CH12 244.25MHz
Auto Vol+0dB AV
TV
2.4.1 Selection of the feature settings
The insertion of Teletext can be switched on or off here.
Press the “” button; the feature settings sub-menu will be displayed:
2.4.1.1 Teletext
*** UFO 394-I ***
Teletext CI 1
Radio text auto
LBA on CNI 0000h
on
2.4.1.2 Common Interface Module (this menu item appears only when the UFZ 394 is plugged in)
*** UFO 394-I ***
Teletext on CI I
Radio text auto
LBA on CNI 0000h
1
The UFZ 394 CA module slot to be used for decrypting the channel can be
selected here.
Access the submenu for setting the UFZ 394 module (only twin 1).
The power consumption of the combination of UFO 394 with UFZ 394 and
two Alphacrypt CA modules is as follows:
5 V → 1.1 A; 12.5 V → 650 mA; 31 V → 9 mA
The upper slot is number 2, the lower slot is number 1.
*** UFO 394-I ***
Slot OSD
--- Slot empty ---
PMT fmml optimised
2
*** UFO 394-I ***
Slot 2
--- Slot empty ---
PMT fmml optimised
OSD
The slot menu allows selection of the CA module for which information will be
displayed in the third line.