Technical data

936.3222/-/1207/6.8e
2.6.1 Frequency fi ne adjustment
Select “Output Frequency”.
By using the scroll buttons, the exact fi ne adjustment frequency setting for
the video carrier can be made in 250 kHz steps.
*** UFO 394-I ***
244.25 MHz
Standard B/G
HF on Level -7
16:9 Letterbox
224.25 MHz
2.6 Sub-menu: Special settings for cable signals
Here the settings for Twin 1 and Twin 2 can be made separately
2.4.3 Selecting a radio programme under “Ra”
I 1236 MHz 27.5 MS
Ra Das Erste deu
Outp. CH12 244.25MHz
Auto Vol+0dB AV
Bayern 4 Klas
*** UFO 394-I ***
Video-PID ---- unscr
Audio-PID 0066 10/1
Subtitles off
Selecting the programme by name from the displayed list.
Use the scroll button to display the radio programme to be selected.
On pressing the sub-menu button, “” will be displayed:
Note:
If no radio programmes are saved in the transponder, the message
“No radio service” is displayed and the current TV programme continues
to be displayed.

The type designation of the module

The audio PID for the selected radio programme

The number of radio programmes in the transponder/number of
languages for the selected radio programme
Press the “” sub-menu key to return to the main menu.
2.4.4 Selecting a language for the TV or radio programme
If the programme is transmitted in more than one language (e.g. “Euronews”),
the scroll buttons can be used to select the desired language
I 1236 MHz 27.5 MS
TV Das Erste deu
Outp. CH12 244.25MHz
Auto Vol+0dB AV
deu
2.5 Selection of the output channel
Select the parameter “Output channel” for the PAL signal.
Use the scroll buttons to set the output channel in 7 MHz or 8 MHz steps
from 111.25 MHz to 847.25 MHz (depending on the standard).
Under the TV standards D/K and I, channel display for special channels is
performed by “---”.
I 1236 MHz 27.5 MS
TV Das Erste deu
Outp. CH12 244.25MHz
Auto Vol+0dB AV
CH12
Press the sub-menu button “” to display the sub-menu
“Special settings for cable signals”.