Product Manual

1. For your protection, wear protective safety glasses.
2. Place the Pressure Washer near the working surface.
Make sure that the water source is turned on and all connections
to the Pressure Washer and Spray Gun are secure and without any water leakage.
For maximum performance and pressure, completely unroll the pressure hose from
its storage reel.
3. Carefully remove the gun from its holder.
4. Select the Right Nozzle for the Job.
To prevent damage to your surface and to select an
appropriate nozzle size for your application, always start with lowest
pressure nozzle size (Green) and continue changing to the higher
nozzle size until the best work result is achieved.
The Pressure Washer comes furnished with four spray nozzles. Each nozzle is
colour coded and delivers a specific spray pattern and pressure for a particular
cleaning job. The size of the nozzle determines the size of the fan spray and the
pressure out of the nozzle.
15° Nozzle – Yellow: 15-degree nozzle is typically used for surface prepa-
ration such as removing dirt, mildew or paint, and can be used on most sur-
faces. This nozzle should only be used on areas that can withstand pressure
from this nozzle.
25° Nozzle – Green: This nozzle delivers a 25 degree spray pattern for
intense cleaning of larger areas. Best used to sweep away dirt and mud.
Use it to sweep away leaves from decks, driveways and sidewalks. This
nozzle should only be used on areas that can withstand pressure from
this nozzle.
Chemical Nozzle – Black: This nozzle is used to apply special chemi-
cals and cleaning solutions. This nozzle produces the weakest pressure
stream of the four nozzles.
Turbo Nozzle – This nozzle circulates a powerful spray into
a circular pattern to provide greater cleaning efficiency over
large areas.
13