Product Manual

USE OF CLEANING DETERGENTS

TO APPLY DETERGENT:

1. Select a detergent/cleanser appropriate for the

intended application.

2. Prepare detergent solution as recommended by the

manufacturer.

3. Remove the detergent tank lid.

4. Fill tank with prepared detergent solution. A small funnel may help with this

task. Replace the detergent tank lid.

5. Select “Black” detergent dispensing quick change nozzle.

Detergent will NOT flow unless “Black” detergent nozzle is

used.

6. Pull spray gun trigger and apply detergent to a dry surface, starting at lower por-

tion of area to be washed and work upward, using long, even, overlapping strokes.

Wetting the surface first is not recommended, as it dilutes

the detergent and reduces its cleaning ability.

7. Allow detergent to “soak in” for 3-5 minutes before washing and rinsing.

Reapply as needed to prevent surface from drying. Do NOT allow detergent to

dry on surface (prevents streaking).

TO RINSE:

1. Remove the “Black” detergent nozzle and replace with the appropriate nozzle for

the application.

2. Keep the spray gun a safe distance from the area you plan to spray.

3. Apply a high pressure spray to a small area, and then check the surface for

damage. If no damage is found, it is okay to continue cleaning.

4. Start at the top of the area to be rinsed, working down with same overlapping

strokes as you used for washing and applying detergent.

Stop the unit by pressing the ON/OFF button.

Disconnect electrical plug.

Turn off water and depressurize unit by squeezing trigger.

CLEANING TIPS:

• Never leave the Pressure Washer unattended while it is plugged into an

electrical outlet and while water is supplied to the equipment.

• Never use the Pressure Washer water inlet to siphon detergent or wax.