Product Manual

CAUTION used without the safety alert symbol

indicates a potentially hazardous situation which,

if not avoided, may result in property damage.

NOTE provides additional information that is use-

ful for proper use and maintenance of this tool. If a

NOTE is indicated, make sure it is fully understood.

In addition to SAFETY ALERTS listed above, there could also be numerous symbols

alerting the operator that specific safety measures are required to safely operate

this tool. Learn these SAFETY SYMBOLS as well as the SAFETY ALERTS to prevent

injury to the operator and to bystanders.

READ OPERATING INSTRUCTIONS: Read and understand tool labels,

safety warnings and precautions in this manual before operating the tool.

Failure to follow WARNINGS could result in serious injury or even death

to the operator or bystanders.

ELECTRICAL SHOCK: This tool produces hazardous electrical voltage.

Read and become familiar with this manual’s WARNINGS and CAUTIONS

so that it is installed and used properly.

WEAR APPROVED EYE PROTECTION: Spray can splash back or pro-

pel objects, including incorrectly attached accessories. Always wear

approved eye protection. Safety glasses must conform to the require-

ments of American National Standards Institute (ANSI) Z87.1 and pro-

vide protection against flying particles from both front and side.

INJECTION HAZARD: Pressure washers can produce fluid streams

severe enough to penetrate animal and human flesh.

SLIPPING and FALLING: Pressure washers produce puddles of slippery

liquid that can result in falls. Kickback from spray wand can result in falls

when using unstable platforms.