Assembly Instructions

3
KEE SAFETY’S SAFETY GATES
KEE GATE is a complete range of safety gates designed
specifically to provide permanent hazard protection for internal
or external applications.
KEE GATE can provide permanent protection for any openings,
ladder/stair access points, roof hatches and restricted areas,
where regular access for maintenance & inspection is required.
The gate has been specifically designed to provide a “retro-fit”
solution to existing fixed structures where opening protection is
required. The U-bolt connection allows the gate to be connected
to posts from 33.7 – 48.3mm (1” – 1.5” USA version).
APPLICATION
KEE GATE has been designed to be fully adjustable and can
accommodate openings up to 1m (30” – 39”).
Connecting the “KEE GATE ” to the supporting structure/post/
stringer is simple via using the U-bolt which can provide
connection around any flat, square or tubular stringer from
33.7 – 48.3mm (1” – 1.5”).
DURABILITY
KEE GATE is available in a range of high quality finishes.
Galvanised: components are supplied with a galvanised
finish to BS EN ISO 1461 and ASTM A53: Hot Dip Galvanised
Coatings Specification and Testing Methods, giving an average
coating of between 55-100 microns.
Aluminium: products are supplied to Grade 6082 T6, & T4,
Anodised Stainless Steel: products are supplied to Grade 316.
COMPONENT BASED SYSTEMS
All products consist of high quality tubing that seamlessly
compliments Kee Safety’s safety portfolio. KEE GATE mounts
easily to all variants of the KEE KLAMP & KEEGUARD systems
as well as Safe Access Solutions such as Mobile Access
Platforms & Static Access Platforms.
VERSATILE SYSTEMS
The KEE GATE range has been specially designed with U-bolt
clamps allowing the products to be mounted to the supporting
structure/post/stringer. This permits connection around any flat,
square or tubular stringer from 33.7 – 48.3mm (1” – 1.5”).
Kee Gate System Overview