Use and Care Manual

www.kegco.com 6 1-888-980-4810
Keg Configuration
The Kegco MDK-209 Kegerator is large enough to fit one full-size keg and a dispense system including a 5 lb CO2 tank.
Because of it's roomy interior, you are able to configure
the MDK-209 to hold multiple kegs as well. It can hold
one Quarter Slim or up to two 5 Gallon Commercial
Kegs, and up to three 5 Gallon Cornelius Home Brew
Kegs, making it a very versatile option for your draft
beer needs.
The stainless steel plate at the bottom of the kegerator
displaces the weight of the kegs evenly over the base of
the kegerator, preventing damage to the plastic interior
liner.
The 5 lb CO2 Tank will fit on the compressor shelf along
with the regulator, allowing you plenty of room for the
keg to sit on the kegerator floor in front of the
compressor shelf. A larger CO2 tank will not fit on the
shelf, and also would not have enough room to sit on
the kegerator floor along with the keg.
The kegerator can also be converted to a refrigerator by
installing the included wire shelves in the grooves
provided. With 5 grooves on each side of the fridge,
you have the ability to space the shelves according to
your needs, adding to it's versatility and convenience.
Care and Maintenance
Cleaning your kegerator:
• Turn off the power, unplug the appliance, and remove all items including the dispense kit.
• Wash the inside surfaces with warm water and baking soda solution. The solution should be about 2
tablespoons of baking soda to a quart of water.
• Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical parts.
• Wash the outside cabinet with warm water and mild liquid detergent. Rinse and wipe dry with a clean soft cloth.
• Do not use steel wool or a steel brush on the stainless steel. These will contaminate the stainless steel with steel
particles and rusting may occur.
• Dust the front grill and back of the unit twice yearly. Make sure the power is off before cleaning.
• It is recommended to clean the unit completely inside and out yearly to maximize the longevity of the product.
Moving Your kegerator:
• The provided casters will allow you to roll the appliance from one location to another in your home easily.
• For transportation, remove the keg, the dispense kit and any other items you may have inside the unit.
• Securely tape down all loose items inside your appliance and tape the door shut.
• Be sure the appliance stays secure in the upright position during transportation.
• Protect the outside of the appliance with a blanket or similar item.