User Manual

Series 2200 Programmable DC Power Supplies Reference Manual Section 4: Command reference
2200S-901-01 Rev. A/November 2011 4-33
STATus:QUEStionable[:EVENt]? (query only)
This command returns the contents of the questionable event
register (QEVR). After executing this command, the quest event
register is reset. Details about the QEVR are available in Appendix
C, Registers (on page C-3).
Group
Status
Syntax
STATus:QUEStionable[:EVENt]?
Related
Commands
STATus:QUEStionable[:EVENt]? (query only) (on page 4-33)
STATus:QUEStionable:CONDition? (query only) (on page 4-31)
STATus:QUEStionable:PTRansition (on page 4-35)
STATus:QUEStionable:NTRansition (on page 4-34)
Arguments
<mask>::=<NR1>
where:
<NR1> is a decimal integer ranging from 0 through 255. The
binary bits of the QENR are set according to this value.
Returns
<mask>
Examples
STATUS:QUESTIONABLE:ENABLE 8
STATUS:QUESTIONABLE:ENABLE? might return 8, which would
indicate that only a transition of the Remote Inhibit bit of the QCR
would affect the QUES bit of the Status Byte Register.