User Manual

Series 2200 Programmable DC Power Supplies Reference Manual Section 4: Command reference
2200S-901-01 Rev. A/November 2011 4-39
SYSTem:REMote (no query form)
This command sets the power supply to remote control mode.
Group
System
Syntax
SYSTem:REMote
Related
Commands
SYSTem:LOCal (no query form) (on page 4-38)
SYSTem:RWLock (no query form) (on page 4-39)
Arguments
None.
Examples
SYSTEM:REMOTE
SYSTem:RWLock (no query form)
If the power supply is in remote mode, this command locks out the
front panel LOCAL button. This command has no effect if the
instrument is in local mode.
Group
System
Syntax
SYSTem:RWLock
Related
Commands
SYSTem:REMote (no query form) (on page 4-39)
SYSTem:LOCal (no query form) (on page 4-38)
Arguments
None
Examples
SYSTEM:RWLOCK
SYSTem:VERSion? (query only)
This command returns SCPI version of the instrument.
Group
System
Syntax
SYSTem:VERSion?
Returns
<NR2> is the software version of the power supply.