User Manual

Section 1: Introduction Series 2200 Programmable DC Power Supplies Reference Manual
1-4 2200S-901-01 Rev. A/November 2011
Electrical ratings for the power connection
Model
Line selector
switch setting
Frequency
Fuse rating
Max power
2200-20-5
110 V / 220 V
50 / 60 Hz
For 110 V: 5 A TH, 250 V
For 220 V: 2.5 A TH, 250 V
350 VA
2200-30-5
110 V / 220 V
50 / 60 Hz
For 110 V: 5 A TH, 250 V
For 220 V: 2.5 A TH, 250 V
500 VA
2200-32-3
110 V / 220 V
50 / 60 Hz
For 110 V: 5 A TH, 250 V
For 220 V: 2.5 A TH, 250 V
350 VA
2200-60-2
110 V / 220 V
50 / 60 Hz
For 110 V: 5 A TH, 250 V
For 220 V: 2.5 A TH, 250 V
500 VA
2200-72-1
110 V / 220 V
50 / 60 Hz
For 110 V: 5 A TH, 250 V
For 220 V: 2.5 A TH, 250 V
350 VA
Environmental performance
Parameter
2200-20-5
2200-30-5
2200-32-3
2200-60-2
2200-72-1
Temperature
Temperature Operating: +0 °C to +40 °C
Humidity
Operating:
5 percent to 95 percent relative humidity ( percent RH) at up to 40 °C, non-
condensing
Pollution degree 2, For indoor use only.
Altitude
Operating: 100 percent capability up to 2,000 meters.
Nominal voltage ratings
There are two ranges for all models, selectable by the line-voltage selector switch. Check the voltage
select switch on the bottom of the power supply before turning it on:
 110 V setting, 110 / 115 / 120 VAC
 220 V setting, 220 / 230 / 240 VAC
Fluctuations must not exceed 10 percent of the nominal rated voltage.
Float voltage rating
Float voltage rating: up to 100 V (DC + peak AC) between earth ground and any output terminal.