User Manual

In this section:
Operating requirements ........................................................... 2-1
Installing the system ................................................................. 2-3
Operating basics ...................................................................... 2-5
Operation examples ............................................................... 2-29
Default setup .......................................................................... 2-34
Clear and sanitize procedures ................................................ 2-34
Operating requirements
This section provides information about operating requirements for the Series 2200 instruments.
Observe all safety precautions listed in Safety Precautions (on page 1-1) and in this topic before
using the Series 2200 instruments and any associated instruments.
Read and follow all installation, operation, and maintenance information carefully before using the
Series 2200 instruments.
Refer to the following sources for complete product specifications:
 Specifications (on page 1-3)
 Series 2200 Programmable DC Power Supplies Specifications (document number SPEC-2200S)
on the Product Information CD-ROM that came with your Series 2200. For the latest version of
the specifications, go to the Keithley Instruments website (http://www.keithley.com).
1. Place the bottom of the instrument on a bench or similar surface. Do not stand the instrument on
it's rear panel. Refer to the following figure for an illustration of how to position the instrument.
Do not stand the instrument on its rear panel. This position is unstable and the instrument
might tip over and be damaged or fall on someone and cause injury. To avoid damage or
bodily injury, place the bottom of the instrument flat on a stable surface.
Section 2
General operation