User Manual

Series 2200 Programmable DC Power Supplies Reference Manual Section 2: General operation
2200S-901-01 Rev. A/November 2011 2-13
Rear panel at a glance
The rear panel of the Series 2200 contains the following items:
 Cooling vents
 Factory test port
 USB device port
 GPIB IEEE-488 port
 110 V/220 V power connector
 12-pin connector; includes remote sense
 Shorting clip. Use this for proper regulation when not using remote sense. This connector comes
installed. It shorts the + drive to the + sense and the - drive to the - sense. To use remote sense,
remove the clip.
The rear panel of the Series 2200 is shown in the following figure.
Figure 4: Rear panel
(1) Cooling vents
Exhaust vent for the internal cooling fan. Keep the vent free of obstructions to prevent overheating.