User Manual

Section 4: Command reference Series 2200 Programmable DC Power Supplies Reference Manual

4-18 2200S-901-01 Rev. A/November 2011

[SOURce:]LIST:WIDth

This command sets the duration of a specified step in a list.

Group

Source

Syntax

[SOURce:]LIST:WIDth <NR1>,{<duration>|MIN|MAX}

[SOURce:]LIST:WIDth? <NR1>

Commands

[SOURce:]LIST:VOLTage[:LEVel] (on page 4-17)

[SOURce:]LIST:CURRent[:LEVel] (on page 4-14)

Arguments

<NR1> is an integer in the range from 1 to 80, which is a step

number in the active list. <duration>::=<NRf><units>

where:

<NRf> is the time duration of the step <units>::={s|ms}

Returns

<NR2>

Examples

LIST:WIDTH 12, 100ms

LIST:WIDTH? 12 might return 0.1, which would be the duration

of step 12.