User Manual

Series 2200 Programmable DC Power Supplies Reference Manual Section 4: Command reference

2200S-901-01 Rev. A/November 2011 4-25

[SOURce:]VOLTage[:LEVel]

This command sets the voltage value of the power supply.

Group

Source

Syntax

[SOURce:]VOLTage[:LEVel] {<NRf>|MIN|MAX|DEF}

[SOURce:]VOLTage[:LEVel]?

Commands

[SOURce:]CURRent[:LEVel] (on page 4-10)

Arguments

where:

<NRf> is a flexible decimal specifying the voltage setting, ranging

from 0 to the maximum nameplate voltage of the power supply.

<units>::={V|mV|kV}

MIN sets the voltage to the minimum level (0 V).

MAX sets the voltage to the maximum level (note that the maximum

level may be somewhat higher than the nameplate).

DEF is the default level (1 V).

Returns

NR2 is the voltage setting in volts.

Examples

VOLTAGE:MIN

VOLTAGE? might return 1.05, which would be the voltage setting in

volts.