User Manual

Section 4: Command reference Series 2200 Programmable DC Power Supplies Reference Manual
4-32 2200S-901-01 Rev. A/November 2011
STATus:QUEStionable:ENABle
This command sets and queries the contents of the questionable
enable register (QENR). The QENR is an eight-bit mask register
that determines which bits in the Questionable Event Register
(QEVR) will affect the state of the QUES bit in the Status Byte
Register (SBR).
Group
Status
Syntax
STATus:QUEStionable:ENABle <mask>
STATus:QUEStionable:ENABle?
Related
Commands
STATus:QUEStionable[:EVENt]? (query only) (on page 4-33)
STATus:QUEStionable:CONDition? (query only) (on page 4-31)
STATus:QUEStionable:PTRansition (on page 4-35)
STATus:QUEStionable:NTRansition (on page 4-34)
*PSC (on page 4-8)
Arguments
<mask>::=<NR1>
where:
<NR1> is a decimal integer ranging from 0 through 255. The binary
bits of the QENR are set according to this value.
Returns
<mask>
Examples
STATUS:QUESTIONABLE:ENABLE 8
STATUS:QUESTIONABLE:ENABLE? might return 8, which would
indicate that only a transition of the Remote Inhibit bit of the QCR
would affect the QUES bit of the Status Byte Register.