Installation guide

Option A_ Power Cord =
NOTE." A grounded 3 prong outlet is required inside a cabinet
next to the dishwasher cabinet opening.
Drill a 11/2" (3.8 cm) hole in cabinet side or rear. See the
"Product and Cabinet Opening Dimensions" section.
Wood cabinet: Sand the hole until smooth.
Metal cabinet: Cover edges of hole with grommet included with
power cord kit.
See the "Tools and Parts" section at the front of the guide for
part details.
Option B_Direct Wire
Helpful Tip."Wiring the dishwasher will be easier if you route the
cable into the cab}net opening from the right-hand s}de.
Drill a 11/2"(3.8 cm) hole in right-hand cabinet side or rear.
See the "Product and Cabinet Opening Dimensions" section.
Wood cabinet: Sand the hole until smooth.
Metal cabinet: Cover edges of hole with a grommet.
See the "Tools and Parts" section at the front of the guide for
part details.
Route cable from power supply through cabinet hole (cable
must extend to the right front side of cabinet opening). Tape
cable to the floor in area shown. This will prohibit cable from
moving when dishwasher is moved into cabinet opening.