Installation guide

Installation Preparation
PARTS SUPPLIED:
Two #8 Phillips flat head wood screws, 5/8” long to secure
dishwasher to underside of countertop (in literature
package).
Two Phillips head, color matched toekick screws (in
literature package).
uoFe
2 Wood Screws 2 Color Matched
Come
Screw Type
Hose Clamp
MATERIALS YOU WILL NEED:
Ferrule, compression nut and 90° Elbow (3/8”NPT
external thread on one end, opposite end sized to fit
water supply)
Thread seal tape
UL Listed wire nuts (3)
Materials for New Installations Only:
" Air gap for drain hose, if required
Waste tee for house plumbing, if applicable
Electrical cable or power cord, if applicable
Screw type hose clamps
Strain relief for electrical connection
Hand shut-off valve
Water line 3/8” min. copper
Coupler for extending drain line, if applicable
FL (Co)
Hand SY
Shut-Off
Toekick Screws
90°
Elbow,
Ferrule
Val
Thread
and
Compression
ave
Seal
Nut
Tape
Electrical Cable
(or Power Cord, if
Waste Tee applicable)
Screw Type
Hose Clamps
<0
= =o
Wire Nuts (3)
Hot Water line
I ))
Coupler
Strain Relief
TOOLS YOU WILL NEED:
Phillips head screwdriver
5/16" and 1/4" nutdriver
6" Adjustable wrench
Level
Carpenters square
Measuring tape
Safety glasses
Flashlight
Bucket to catch water when flushing the
line
Gloves
For New Installations Only:
Tubing cutter
Drill and appropriate bits
Hole saw set
Gloves
ee
Screwdriver
CT)
Flashlight
Level
and
a
/16"
a:
Nutdriver
6" Adjustable
Wrench
“JP
Hole Saw Set