Instructions / Assembly

15
3. Remove the screw and nut holding the bulb
case in place.
CAUTION: Be careful with fingers around
possible sharp edges when removing bulb case
screw and nut.
4. Remove the bulb case from the light fixture.
2. Remove the rear panel. 5. Press button on end of bulb case to free and
remove bulb case glass.
1. Remove the rear panel screws and nuts.
6. Wiggle the old bulb free from the bulb socket.
If the light bulbs on the inside rear of the firebox do not work, follow the steps below to replace them.
It is recommended to remove the grill lid before attempting to replace the firebox light bulbs. Open the lid and
remove the cotter keys from each hinge bolt. Unscrew the hinge bolt from the nut on each side. Lift off the lid.
Replace lid when finished replacing bulbs.
Do not touch the replacement bulb at any time with your bare fingers. Perspiration residue from your skin may dry
on the bulb surface and cause it to burn out prematurely.
CAUTION: Be careful with fingers around possible sharp edges of the firebox when changing bulbs.
Light Bulb Replacement