® Side by Side Refrigerator Refrigerador de dos puertas R_frig_rateur % . 2220694 c6te & c6te , <, ,+ = ,, = ,,+, Sears Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. Sears Canada, Inc., Toronto, Ontario, Canada M5B 2B8 www.sears.com www.sears.
TABLE OF CONTENTS WARRANTY WARRANTY .................................................................................... 2 ONE-YEAR REFRIGERATOR SAFETY ............................................................. 3 REFRIGERATOR INSTALLATION ................................................. Unpacking .................................................................................... Location Requirements ................................................................ Electrical Requirements .......
REFRIGERATOR SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This symbol alerts you to potential hazards that can kill or hurt you and others. All willsymbol. follow the safety alert symbol and either the word "DANGER" or Thissafety is themessages safety alert "WARNING.
REFRIGERATOR INSTALLATION Explosion Hazard Keep flammable materials and vapors, such as gasoline, away from refrigerator. Failure to do so can result in death, explosion, or fire. Removing packaging materials • Remove tape and glue residue from surfaces before turning on the refrigerator. Rub a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry. Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue.
ElectricalShockHazard Pluginto a grounded3 prongoutlet. Donot removegroundprong. Donot usean adapter. Donot usean extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection: Recommended grounding method A 115 Volt, 60 Hz., AC only 15 or 20 ampere fused, grounded electrical supply is required.
TOOLS NEEDED: 1/4in.,1/2in.,and%6in.hex-head socketwrenches, aflat-head screwdriver anda Phillips screwdriver. IMPORTANT: Before youbegin,turntherefrigerator controlOFF, unplug refrigerator ordisconnect power. Remove foodandany adjustable doororutilitybinsfromdoors. Electrical Shock Hazard Disconnect power before removing doors. Reconnect both ground wires before operating, Failure to do so can result in death or electrical shock. Top Left Hinge Door Removal Top Right Hinge 1.
NOTE: It may only be necessary to remove either the door handle or the doors to get your product through the doorway of your residence. Measure the door opening to determine whether to remove the refrigerator handles or the doors. Handle Removal 1. 2. 3. Door and Hinge Replacement 1. Replace both bottom hinges, if removed. Tighten screws. 2. Assistance may be needed to feed the water line through the bottom hinge while reinstalling the freezer door.
3, NOTE: Horizontal pipe will work, but drill on the top side of the pipe, not the bottom. This will help keep water away from the drill and normal sediment from collecting in the valve. Door Closing 1. Move the refrigerator into its final position. 2. Place a level inside the refrigerator at the back of the top shelf (see Graphic 6). 3. Locate the leveling screws behind the base grille of the refrigerator on either side. 4.
No Please read before using the water system. Immediately after installation, follow the steps below to make sure that the water system is properly cleaned. 1. Open the freezer door and turn off the ice maker. For Style 1 lift up the wire shutoff arm as shown. For Style 2 move the switch to the OFF (right) setting as shown. The ON/OFF switch is located on the top right side of the freezer compartment. Sou Your new refrigerator may make sounds that your old one didn't make.
IMPORTANT: Because aircirculates between bothsections, any odorsformed inonesection willtransfer totheother.Youmust thoroughly cleanbothsections toeliminate odors.Toprevent odortransfer fromfood,wraporcoverfoodstightly. ElectronicControls(onsomemodels} Foryourconvenience, yourcontrolsare preset at the factory, When installing your refrigerator, make sure that the controls are still preset to the "mid-settings" as shown.
3. Remove the glass to stop dispensing. NOTE: The first few batches of ice may have an off-flavor from new plumbing and parts. Throw the ice away. Also, take large amounts of ice from the ice bin, not through the dispenser. The water Cut Hazard Use a sturdy glass when dispensing ice or water. Failure to do so can result in cuts.
The dispenser lock (on some models) Your dispenser can be turned off for easy cleaning or to prevent accidental dispensing by small children and pets. To turn off the dispenser, press the LOCK button. The indicator will appear above the LOCK button and the ice and water dispensers will not work. To unlock the dispenser, press the UNLOCK button until the indicator appears. Then continue to dispense ice or water as usual. Style 1: Behind the base grille filter 1.
Flushing the Water System After Replacing has the maximum ice production feature, push the switch to MAX. Filter Use a sturdy container to depress the water dispenser bar until the water begins to flow. Flush the water system by dispensing and discarding 2 to 3 gal. (8 to 12 L) of water. Cleaning the system will take approximately 6 to 7 minutes and will help clear air from the line. Additional flushing may be required in some households. To remove and replace freezer shelf ice bin (Style 1): 1.
2. Wash ice bin or bucket with a mild detergent, rinse well and dry thoroughly. Do not use harsh or abrasive cleaners or solvents. 2. Replace the shelf by guiding it back into the slots on the frame and pushing the shelf in past the stop. REMEMBER: • Allow 24 hours to produce the first batch of ice. • Discard the first three batches of ice produced to avoid impurities that may be flushed out of the system.
IMPORTANT: To extend freshness, wrap meats in airtight, moisture-proof materials before storing. Always store meat as recommended. The dell drawer stores raisins, nuts, spreads, and other small items at normal refrigerator temperatures. TO remove and replace the dell drawer: 1. Remove the dell drawer by sliding it straight out to the stop. Lift the front and slide the drawer out the rest of the way. 2. Replace the dell drawer by sliding it back past the stop.
Ca JB< Ate o_ s{ '_es(xSes-Accesso'y To remove and replace the wine rack (left) or can/bottle rack (right): 1. Remove the rack by pulling it straight out from the shelf. 2. Replace the rack by sliding it in between the shelf and the wall of the refrigerator. NOTE: For long-term storage, place eggs in a covered container or in their original carton on an interior shelf. The freezer basket or bin can be used to store bags of frozen fruits and vegetables that may slide oft freezer shelves.
metal exteriors, apply appliance wax (or auto paste wax) with a clean, soft cloth. Do not wax plastic parts. NOTE: Can racks may be purchased as an Accessory models, NOTE: To keep your Stainless Steel refrigerator looking like new and to remove minor scuffs or marks, it is suggested that you use the manufacturer's approved Stainless Steel Cleaner & Polish. for some IMPORTANT: This cleaner is for Stainless Steel parts only! TO remove and replace the racks/bins: 1.
Refrigerator Crisper Light or Upper Freezer Light (on some models) • Remove light shield by grasping the top center of the shield and pulling forward while turning it slightly to one side. If necessary, remove top crisper drawer to access crisper light shield. Replace the light shield by inserting the tabs on one end into the slotted holes in the refrigerator or freezer liner. Then, carefully bend the shield at the center to insert the tabs on the other end.
4. Depending on your model, turn the Thermostat Control or Refrigerator Control to OFR See the "Setting or Using the Controls" section. 5. Unplug the refrigerator. 6. Empty water from the defrost pan. 7. Clean, wipe, and dry thoroughly. 8. Take out all removable parts, wrap them well, and tape them together so they don't shift and rattle during the move. 9.
Is there a water filter installed on the refrigerator? The filter may be clogged or installed incorrectly. Check the filter installation instructions to ensure that the filter was installed correctly and is not clogged. If installation or clogging is not a problem, call a technician or other qualified person. NOTE; If not due to any of the above, there may be a problem with the water line. Call for service.
The dispenser water is not cool enough The doors will not close completely • Has the refrigerator been newly installed? for the refrigerator to cool completely. • Has a large amount of water been recently dispensed? Allow 24 hours for the water to cool completely. • Has water not been recently dispensed? The first glass of water may not be cool. Discard the first glass of water.
SERVICE Your purchase has added value because you can depend on Sears HomeCentral ® for service. With over 2,400 Service Technicians and access to over 900,000 parts and accessories, we have the tools, parts, knowledge and skills to back our pledge: We Service What We Sell. Master Protection Agreements Congratulations on making a smart purchase. Your new Kenmore_"_appliance is designed and manufactured for years of dependable operation.
WATER FILTER CERTIFICATIONS Water _nt Certif_ato 98D+t_]n_t*_ Device Numbez 1366 Ko,mmbetL_,,1998 Depart_mtofIkalthServices Water Tx_tment Device Certificate Numb_ 98-1367 Ds_ Bm_: D#h_ox_on TrtdemlrldMedd w_qp0o] Rtt_d Do no systems letl Serdee Eleme_tl _, Dtl acid TlrbH _O_tlt_[D Ct_aeitT: use where claiming Iicemeat i.c 4oo Thewxtertrextlmentde_l i)lllt_donl_ll_ _em_Jo• 11611_0 of •,be .e_¢+(lll ltnd S •fe;_+_ (+"_ Mkrobld IS+ 19:J8 R vrnmpoot vcF-i.
PRODUCT DATA SHEETS Base Grille Water Filtration System Model WF-NLC250/NLC250 42 for the reduction of Chlorine (Class I) Taste and Odor and against Tested and certified by NSF International against ANSI/NSF Standard ANS/NSF Standard 53 for the reduct on of Lead, Cysts and Turb d ty. (_) Capacity; 250 Gallons (946 Liters) Service Flow Rate: 0.5 GPM (1.89 L/min.) @ 60 psi. Substance Reduction Aesthetic Effects U.S.
Your Home For repair-in your home-of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters. 1-800-4-MY-HOME ® (1-soo-469-4ss3) Call anytime, day or night (U.S.A. and Canada) www.sears.com www.sears.