SENSOR SMART TM Electric Dryer KING SIZE TMCapacity Plus Secadora El_ctrica SENSOR SMART TM a capacidad extra grande (KING SIZE TM"Plus") 3979095B Sears Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. www.sears.
TABLE OF CONTENTS SERVICE .......................................................................................... WARRANTY ..................................................................................... 3 3 DRYER SAFETY .............................................................................. 4 INSTALLATION INSTRUCTIONS .................................................. Tools and Parts ............................................................................
SERVICE WARRANTY Master Protection Agreements Congratulations on making a smart purchase. Your new Kenmore _"_appliance is designed and manufactured for years of dependable operation. But like all products, it may require preventive maintenance or repair from time to time. That's when having a Master Protection Agreement can save you money and aggravation.
DRYER SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This symbol alerts you to potential hazards that can kill or hurt you and others. Allhissafety follow the safety alert symbol and either the word "DANGER" or is themessages safety alertwillsymbol. "WARNING.
INSTALLATION INSTRUCTIONS Check that you have everything necessary for correct installation. Proper installation is your responsibility. • Flat-blade screwdriver • Safety glasses • Adjustable wrench that opens to 1 in. or hexhead socket wrench (for adjusting dryer feet) • Vent clamps • Caulking gun and compound (for installing new exhaust vent) Keep flammable materials and vapors, such as gasoline, away from dryer.
Installation Clearances Mobile Home-Additional Installation Requirements This dryer is suitable for mobile home installations. The installation must conform to the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD Part 280). The location must be large enough to allow the dryer door to open fully.
If using a power supply cord: If connecting by direct wire: Use a UL approved power supply cord kit marked for use with clothes dryers. The kit should contain: Power supply cable must match power supply (4-wire or 3-wire) and be: • • • A UL approved 30 amp power supply cord, rated 120/240 volt minimum. The cord should be type SRD or SRDT and be at least 4 ft (1.22 m) long. The wires that connect to the dryer must end in ring terminals or spade terminals with upturned ends.
PowerSupplyCord DirectWire FireHazard FireHazard Usea newULapproved30amppower supplycord. Usea ULapprovedstrain relief. Disconnectpowerbeforemakingelectrical connections. Use10gaugesolid copperwire. Usea ULapprovedstrain relief. Disconnectpowerbeforemakingelectrical connections. Connectneutralwire(whiteor centerwire)to centerterminal(silver). Groundwire(greenor barewire)mustbe connectedto greengroundconnector. Connectremaining2 supplywiresto remaining 2 terminals(gold).
Electrical Connection Options If your home has: 4-wire receptacle (NEMA type 14-30R) (_ 4-wire direct 3-wire receptacle (NEMA type 10-30R) And you will be connecting to: Go to Section: A UL listed, 120/240 volt 4-wire connection: Power Supply amp., dryer power supply minimum, 30 cord* Cord A fused 4-wire connection: circuit breaker disconnect or box* Direct Wire A UL listed, 120/240 volt 3-wire connection: Power Supply amp.
4-wire connection: 3. Connect ground wire (green or bare) of power supply cable to external ground conductor screw. Tighten screw• 4. Placethehookedendoftheneutralwire(whiteorcenterwire) of power supply cable under the center screw of terminal block (hook facing right). Squeeze hooked end together. Tighten screw. Direct Wire IMPORTANT: A 4-wire connection is required for mobile homes and where local codes do not permit the use of 3 wire connections. Direct wire cable must have 5 ft (1.
1. Loosen or remove center terminal block screw. 1. Loosen or remove center terminal block screw. 2. Connect neutral wire (white or center wire) of power supply cord to the center, silver-colored terminal screw of the terminal block. Tighten screw. 2. Place the hooked end of the neutral wire (white or center wire) of power supply cable under the center screw of terminal block (hook facing right). Squeeze hooked end together. Tighten screw. 3 2 1. External ground connector 2.
4. Tighten strain relief screws. • 5. Insert tab of terminal block cover into slot of dryer rear panel. Secure cover with hold-down screw. The dryer exhaust must not be connected into any gas vent, chimney, wall, ceiling, or a concealed space of a building. • Do not use an exhaust hood with a magnetic latch. 6. Connect a separate copper ground wire from the external ground connector screw to an adequate ground. • Do not install flexible metal vent in enclosed walls, ceilings or floors.
Optional exhaust installations This dryer can be converted to exhaust out the right side, left side, or through the bottom. NOTE: The following kits for close clearance alternate installations are available for purchase, For further information, please call t-800-4-M¥-NOME _ (1-800-469-4663). • Over-The-Top Installation: Part Number 26-49900 Periscope Installation (For use with dryer vent to wall vent mismatch): Part Number 26-49901 - Less than 5 in. (12.7 cm) mismatch Part Number 26-49908 - 5 in. (12.
The angled hood style (shown following) is acceptable. 2.5" See the exhaust vent length chart that matches your hood type for the maximum vent lengths you can use. Exhaust systems longer than specified will: 3. • Shorten the life of the dryer. • Reduce performance, resulting in longer drying times and increased energy usage. Determine the number of elbows you will need. NOTE: Do not use vent runs longer than specified in the Vent Length Chart.
1. Using a 4 in. (10.2 cm) clamp, connect vent to exhaust outlet in dryer. If connecting to existing vent, make sure the vent is clean. The dryer vent must fit over the dryer exhaust outlet and inside the exhaust hood. Make sure the vent is secured to exhaust hood with a 4 in. (10.2 cm) clamp. 2. Move dryer into final position. Do not crush or kink vent. Make sure dryer is level. 3. (On gas models) If flexible metal tubing is used, check to be sure there are no kinks in the flexible gas line. 1.
DRYER USE SELECTCYCLE i0I._. o---MO t D_t,e O WmN_ 6_RB O _B_ U_ e @ m M_ HlaR O MBBIIJM O O LOW O NORMN. O ItI(]H WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. The following is a guide to starting your dryer. Periodic references to other sections of this manual provide more detailed information. 1. Check lint screen. Clean if needed. 2. Put laundry into dryer and shut door. See "Loading.
Cycle tips • Dry most loads using the preset cycle settings. To stop your dryer at any time Press STOP/CANCEL or open the door. To pause the dryer at any time Open the door or press STOP/CANCEL • Use this chart as a guide to dry various loads. Drying temperature and Auto Dry Level (Normal Dry) are preset when you choose an Auto Dry cycle. You can select a different dryness level, depending on your load (see "Modifiers"). • For a Timed cycle, drying temperature can be adjusted. once.
Bulky Items Use this cycle for drying large, bulky items that dry quickly on the outside, but stay wet on the inside. This cycle uses medium heat. Follow the progress of your dryer with the Drying Status indicators. DRYER STATUS i DRYING Delicate/Casual Use this cycle to get low heat for drying synthetic fabrics, washable knit fabrics and no-iron finishes.
You can customize your cycles by selecting options. OPnONS o HEAW DUtY DELICATE When you select a cycle, the preset Auto Dry Level (Auto Dry) or Timed Dry settings for that cycle will glow. Modifiers allow you to change the preset settings and fur[her customize your cycles. Auto Dry Level with Ultra Moisture Sensing Auto Dry Level with Ultra Moisture Sensing provides the most accurate drying results in the shortest time. This can help you save money on utility bills and reduce the risk of fabric damage.
NOTE: Check the lint screen and remove any lint accumulated from items dried on the rack. @ #3 Suggested Drying Items for Rack Cycle Setting Suggested Time* (minutes) You can change Cycles, Options and Modifiers anytime before Start is pressed. • A short tone sounds when a change is selected. • Two short tones sound if an unavailable combination selected. The last selection will not be accepted. is Changing Cycles after pressing Start 1. Press STOP/CANCEL twice. 2. Select the desired cycle. 3.
Every load cleaning The lint screen is located in the door of the dryer. Clean it before each load. A screen blocked by lint can increase drying time. To clean To clean the dryer drum 1. Make a paste with powdered warm laundry detergent and very water. 2. Apply paste to a soft cloth. OR Apply a liquid, non-flammable household cleaner to the stained area and rub with a soft cloth until all excess dye is removed. 3. Wipe drum thoroughly with damp cloth. 4.
TROUBLESHOOTING Dryer will not run • First try the solutions suggested here and possibly avoid the cost of a service call. Dryer displaying Checkthe following: Is the power cord plugged in? Has a fuse blown, or has a circuit breaker tripped? Was a regular fuse used? Use a time-delay fuse.
Items shrinking • Wasthe dryer overloaded? Dry smaller loads that can tumble freely, • Bid theload overdry? Check the manufacturer's load type (see "Cycles"). care label. Match dryer setting to Loads are wrinkled • Was load removed from dryer at the end of the cycle? • Was dryer overloaded? Dry smaller loads that can tumble freely. • Did load overdry? Check the manufacturer's load type (see "Cycles"). care label.
Your Home For repair-in your home-of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters. 1-800-4-MY-HOME ® (1-800-469-4863) Call anytime, day or night (U.S.A. and Canada) www.sears.com www.sears.