Owner's Manual

15
■ Press the CRUSHED button for crushed ice, or the CUBED
button for cubed ice.
Style 1:
Style 2:
For crushed ice, cubes are crushed before they are dispensed.
This may cause a slight delay when dispensing crushed ice.
Noise from the ice crusher is normal, and pieces of ice may vary
in size. When changing from crushed to cubed, a few ounces of
crushed ice will be dispensed along with the first cubes.
To Dispense Ice:
1. Press button for the desired type of ice.
2. Press a sturdy glass against the dispenser lever. Hold the
glass close to the ice guide to ensure that the ice dispenses
into the glass.
IMPORTANT: You do not need to apply a lot of pressure to
the lever in order to activate the ice dispenser. Pressing hard
will not make the ice dispense faster or in greater quantities.
3. Remove the glass to stop dispensing.
NOTE: Ice may continue to dispense for several seconds
after removing the glass. The dispenser may continue to
make noise for a few seconds after dispensing.
The Dispenser Light
On some models, the dispenser light will automatically turn on
when you use the dispenser.
■ If you want the light to be on continuously, press the
LIGHT ON button. To turn the light back off, press the
LIGHT OFF button.
Style 1:
Style 2:
The dispenser lights are LEDs that cannot be changed. If it
appears that your dispenser lights are not working, see “Problem
Solver” for more information.
The Dispenser Lock
The dispenser can be turned off for easy cleaning or to avoid
unintentional dispensing by small children and pets.
NOTE: The lock feature does not shut off power to the
refrigerator, to the ice maker, or to the dispenser light. It simply
deactivates the dispenser lever. To turn off the ice maker, see
“Ice Maker and Storage Bin.”
■ To lock the dispenser, press the LOCK button. To unlock the
dispenser, press the UNLOCK button.
Style 1:
Style 2:
A. Ice guide
Cut Hazard
Use a sturdy glass when dispensing ice.
Failure to do so can result in cuts.
WARNING
A