Use and Care Manual

Cleaning the Water Inlet Filters

If the washer does not ll properly, an error message will

show on the display. The inlet valve lter screens could

be plugged by hard water scale, sediment in the water

supply, or other debris.

NOTE: The inlet screens protect the delicate parts of the

inlet valve from being damaged by particles that could

enter the valves with the water supply. Operating the

washer with these lters removed could cause a valve

to fail to open, resulting in ooding and/or property

damage.

IMPORTANT: ONLY use new, high-quality inlet hoses

when installing this laundry product. Aftermarket hoses

are not guaranteed to t or function correctly. Other

hoses may not tighten correctly and could cause leaks.

Subsequent damage to product or property will not be

covered under the terms of the product warranty.

Turn OFF both water faucets completely. Unscrew

the hot and cold water lines from the back of the

washer.

MAINTENANCE

CARE AND CLEANING

Carefully remove the lters from the water valves

and soak them in white vinegar or a lime scale

remover, following the manufacturer’s instructions.

Be careful not to damage the lters while cleaning.

Rinse thoroughly before reinstalling. Press the lters

back into place.

Before reattaching the hoses, ush the hoses and

water lines by running several gallons of water

through the hoses and into a bucket or drain.

Inlet Filter