User manual
Before Using the Cooktop
Minimum Pan Size Requirements
require a pan size to be used at each location
The outer tip of each Cooking Zone cross-hair is helpful
to determine the pan size. After centering the
cookware on the cooktop, make sure the cookware does not
extend more than 1/2” beyond the outer tip of cross-hair of
glass surface without the bottom of the pan touching the
metal cooktop trims.
power level and the pan will not heat.
Recommendations
Cookware not centered
on Cooking Zone surface.
Cookware centered correctly
on Cooking Zone surface.
Curved or warped pan
bottoms or sides.
straight sides.
Pan does not meet the
minimum size required for
the Cooking Zone used
Pan size meets or exceeds
the recommended minimum
size for the Cooking Zone
Pan bottom rests on
cooktop trim or does not
rest completely on the
cooktop surface.
Pan rests completely on
the Cooktop surface.
Heavy handle tilts pan. Pan is properly balanced.
above may be detected by the sensors located below the
problems before attempting to reactivate the cooktop.