User manual
Using the Touch Control
cooktop may not respond to the selection made.
Cooktop Power Pad
This feature allows the cooktop to be locked only when the
cooktop may be used normally.
to activate the cooktop, touch the corresponding Cooking
needed. “-” will appear in the Alpha-Numeric display and
will cancel and the Cooktop will go back to ready mode. To
1
18), 2, 2., 3, 3., 4, 4., 5, 5., 6, 6. 7, 8, 9, p. Half power
levels (available between 2 and 7 power level) are indicated
setting of P or “Power Boost” provides approximately 139%
level drops to 9. Each key pad touch (or just holding down
power levels for any Cooking Zone quickly.
Cooktop Control Pads
The error code will display in the zone that has the error. The
service call .
Residual Heat Message
H
Zone. The H will continue to display if the temperature is still
The Cooking Zones may
But the glass
surface may be HOT from residual heat
transferred from the cookware and burns may
occur if surface is touched.