User manual



Setting Cooktop Controls


for cookware of various sizes. Be sure to place cookware that
meets the minimum and maximum pan size requirements (see
pages 6 & 7) for the Cooking Zone desired and is best for the
amount of food being prepared. Place the cookware with the
prepared food on the Cooking Zone  setting any of
the Cooktop controls.

1. Place the prepared food using the correct type and size
cookware on the desired Cooking Zone. Be sure to center
the cookware on Cooking Zone completely covering the
minimum ring marked on the Zone surface.
2. Touch and hold the
key pad for 2 seconds (or until a

is touched

clear.
3. To start a Cooking Zones lightly touch the
key pad for
the Cooking Zones needed. A beep will sound and the chosen
Cooking Zone power level Alpha-Numeric display will show
“- indicating no power level for the Zone has been set yet.


4. Set the desired power level for the Cooking Zone by touching
either the
or  key pad is touched
the Cooking Zone will start at a “Power Boost” maximum
power level (the Cooking Zone Alpha-Numeric display will
indicate “P and the 
key
pad is touched once the Cooking Zone will start at low (the
Cooktop Control Pads


Warm setting for any of the Cooking Zones. The



Control area once to set.
L (low heat) should
appear in the corresponding Cooking Zone Alpha-

Pan Detection


the pan has been moved or is not centered correctly, or is



minutes.
Cooking Zone Alpha-Numeric display will show “1  and

requirements for the Cooking Zone (See pages 6 & 7) are
not met the sensors will detect a problem and the display

Alpha-Numeric display. Any problems must be corrected
before proceeding.
      
or key
pads to adjust or scroll through power levels at any time during
the cooking process (To scroll through the power levels touch
and hold the
or key pads until the power level desired

the food will begin to heat at that level until the power level is
manually changed or power sharing is activated.

 
key pad to turn


above the

and the chosen Cooking Zone power level Alpha-Numeric



Cooking Zone Alpha-Numeric display may show H if the

display will continue to display H, even if the Cooktop is

indicate H 
The Cooking Zones may appear to be cool

But the glass surface may be HOT from residual heat
transferred from the cookware and burns may occur.


cooktop may cause the cooktop to display an error code



the stuck key and once to turn the zone back on.

vent holes are blocked the cooktop internal sensor may


active Cooking Zone for any reason, a sensor will detect
the situation and the cookware will no longer heat. The

power level set for the Cooking Zone. The Cooking Zone will
remember the power level setting for up to 3 minutes before
