Use and Care Guide
19
Cart
□ To attach side panels, align side panel holes with screw insert holes on each side of bottom
shelf. Note: Left side panel has match holder attachment.
□ Attach but do not fully tighten left and right side panels to bottom shelf with
(6) M6x13 screws.
Leave a small gap beneath the screw heads for easier attachment of panels, brackets and bars
in the following steps on this page. (A)
□ Attach back panel to bottom shelf and two side panels with
(8) M4x10 screws .(B)
□ Attach tank baffle bar to back panel and bottom shelf with
(2) M4x10 screws. (C)
□ Align door bracket holes with holes on side panels. Attach door bracket to side panels with
(4)
M4x10 screws. (D) Note: Attach bracket so that magnets are at top.
□ Align the holes in the cart support angle bars with holes on bottom shelf and side panels.
Attach angle bars with
(8) M4x10 screws. (E) Now fully tighten the 6 screws attaching the side
panels to the bottom shelf.
M6X13 screw Qty: 6 pcs
A
B
C
E
D
M4X10 screw Qty: 22 pcs