Instructions / Assembly

Right Side Shelf
□ Attach fascia to right side shelf with (2) M5x10 hex bolts and (2)M5 flat washers and (1) M4X10 hex
bolt with the supplied wrench. (A-B)
□ Hang right side shelf onto two pre-installed screws on right side of firebox. (C)
□ Attach shelf to firebox as follows:
- From inside to outside of firebox with (3) M6x13 screws and (3) M6 flat washers. (D)
IMPORTANT: Make sure side shelf fascia is aligned with control panel before tightening screws.
- From outside to inside of firebox with (1) M4x12 screw. (E)
□ Fully tighten the pre-installed screws on right side of firebox to complete attachment of right side shelf.
M5X10 hex bolt Qty: 2 pcs
M4X10 hex bolt Qty: 1 pc
05349-40500318 • 25
A
B
C
D
E
M5 flat washer Qty: 2 pcs
M6X13 screw: Qty: 3 pcs
M4X12 screw Qty: 1pc
M6 flat washer Qty: 3pcs