Use and Care Manual

146.22124910 • 23
6
Grill Head to Cart
This step requires two people to lift and position grill head onto cart.
Remove the tie wraps and packaging material from regulator hose, side burner valve and igniter
wire. Pull hose and igniter wire out to side of grill head.
Carefully lower the grill head onto the cart. Make sure the regulator hose and igniter wire are
hanging outside the cart.
Line up control panel so that it is flush with front panels. Attach head to cart with (4) M6X13 screws.
M6X13 screw Qty: 4 pcs