Operation Manual

ManualsBrandsKenwood ManualsAcousticsC-313

C-515BT/C-313

Manual preset

You can store up to 30 for FM and 10 for AM radio

stations in the memory. When a preset radio stations

selected, the preset number appears on the display.

1 Press TUNER BAND button to select the desired

waveband: FM or AM.

2 Press 4 or ¢ button to tune in to the

desired frequency.

3 Press MEMORY/REPEAT button so that "P – –"

appears on the display.

4 If you want to store the radio station to another

preset number, press FOLDER/P.CALL A or B,

or digit buttons 0–9 to select the desired preset

number.

5 Press ENTER button again to store the radio

station.

6 Repeat steps 2 to 5 to store other preset radio

stations.

⁄

• During preset, if no button is pressed within 20 seconds, the

system will exit preset mode automatically.

Tuning to a preset radio station

Press FOLDER/P.CALL A or B, or digit buttons 0–9

to select the desired preset number.

The preset number and radio frequency appear on

the display.

⁄

• Press the digit buttons as shown below:

FM AM

To select 1 1 and ENTER 1 and ENTER

To select 2 2 and ENTER 2 and ENTER

To select 10 1, 0 and ENTER 1, 0 and ENTER

Using the radio

Tuning in radio stations

1 Press TUNER BAND button to select the desired

waveband: FM or AM.

2 Press and hold 4 or ¢ button to tune in to

the desired frequency.

⁄

• To tune to a weak station, briefly press 4 or ¢ button

repeatedly until the display shows the desired frequency or

when the best reception has been obtained.

STEREO/MONO

Press the STEREO/MONO button to select mono or

stereo mode.

When stereo mode is selected, the icon "STEREO"

appears on the display (if current station is FM

stereo).

⁄

• You are able to select stereo or mono mode in FM band only.

Auto preset

Radio stations can be preset automatically in preset

channels.

1 Press TUNER BAND button to select the desired

waveband: FM or AM.

2 Press MEMORY/REPEAT button for more than 2

seconds.

The receivable radio stations are preset

automatically.

When the Auto preset operation has completed,

the unit enters the condition in which preset

station P01 is tuned.