MONITOR WITH DVD RECEIVER DDX5022 DDX5022Y DDX52RY INSTALLATION MANUAL © B54-4621-00/00 (EW/E2W/E3W) B54-4621-00̲00̲en.indd 1 07.12.
Accessories 1 ..........1 2 ..........2 3 ..........1 2 | DDX5022/DDX5022Y/DDX52RY B54-4621-00̲00̲en.indd 2 07.12.
Installation Procedure 1. To prevent short circuits, remove the key from the ignition and disconnect the - terminal of the battery. 2. Make the proper input and output wire connections for each unit. 3. Connect the wire on the wiring harness. 4. Take Connector B on the wiring harness and connect it to the speaker connector in your vehicle. 5. Take Connector A on the wiring harness and connect it to the external power connector on your vehicle. 6. Connect the wiring harness connector to the unit. 7.
Connection Connector A Ground wire (Black) 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 Battery wire (Yellow) Ignition wire (Red) Connector B Antenna Cord (Orange/White) Dimmer control wire (Orange/White) ILLUMI Connect to the vehicle's parking brake detection switch harness. Parking sensor wire (Light Green) PRK SW For the sake of safety, be sure to connect the parking sensor. Connect to vehicle's reverse lamp harness when using the optional rear view camera.
Cooling fan FM/AM antenna input (JASO) FUSE ( 15A ) Wiring harness (Accessory 1) REVERSE REMO.CONT MUTE ANT. CONT P CONT English | B54-4621-00̲00̲en.indd 5 5 07.12.
Connecting Wires to Terminals Connector Function Guide Pin Numbers for ISO Connectors External Power Connector A-4 A-5 A-6 A-7 A-8 Cable Colour Functions Yellow Blue/White Orange/White Red Black Battery Power Control Dimmer Ignition (ACC) Earth (Ground) Connection Speaker Connector B-1 B-2 B-3 B-4 B-5 B-6 B-7 B-8 Purple Purple/Black Gray Gray/Black White White/Black Green Green/Black Rear Right (+) Rear Right (–) Front Right (+) Front Right (–) Front Left (+) Front Left (–) Rear Left (+) Rear Left (–
System Connection USB terminal USB device (commercially available) Do not connect. ■ Audio Input Resistance-free stereo type mini plug (3.5φ) ■ Visual Input Resistance-free mini plug (3.
Optional Accessory Connection iPod (commercially available) KCA-iP300V (Optional Accessory) Audio Output (Black) Visual Output (Yellow) Visual Input (Yellow) USB terminal USB terminal Navigation System (Optional Accessory) Audio Input (Black) KCA-BT200 input (Optional Accessory) TV Tuner (Optional Accessory) TV ANTENNA INPUT Connection cable (Included in the Navigation System) TO MONITOR UNIT Connection cable (Included in the TV tuner) 8 | DDX5022/DDX5022Y/DDX52RY B54-4621-00̲00̲en.indd 8 07.
Installation for Monitor/Player Unit Firewall or metal support Screw (M4X8) (commercially available) Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Self-tapping screw (commercially available) Metal mounting strap (commercially available) Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip). Installing the Escutcheon Accessory 3 English | B54-4621-00̲00̲en.indd 9 9 07.12.
Removing Monitor/Player Unit Removing the Hard Rubber Frame (escutcheon) 1. Engage the catch pins on the removal tool 2 and remove the two locks on the lower level. Lower the frame and pull it forward as shown in the figure. Removal Tool (Accessory 2) Removing the Unit 1. Remove the hard rubber frame by referring to the removal procedure in the section . 2. Remove the Hex-head screw with integral washer (M4 × 8) on the back panel. 3.
B54-4621-00̲00̲en.indd 11 07.12.
B54-4621-00̲00̲en.indd 12 07.12.
