DNX7210BT DNX5210BT DNX5510BT DNX4210BT GPS NAVIGATION SYSTEM Quick Start Guide © 2011 JVC KENWOOD Corporation B59-2101-00_00_12DNX7_QSG_E.
Quick Start Guide About The Quick Start Guide Contents This Quick Start Guide explains the basic functions of this unit. For functions not covered in this guide, refer to the Instruction Manual (PDF file) contained in the included CDROM “Instruction Manual”. To refer to the Instruction Manual contained in the CD-ROM, a PC loaded with Microsoft® Windows XP/ Vista/7 or Mac OS X® 10.4 or later is required in addition to Adobe® Reader™ 7.1 or Adobe® Acrobat® 7.1 or later.
DNX7210BT/DNX5210BT/DNX5510BT/DNX4210BT Precautions Protecting the monitor To protect the monitor from damage, do not operate the monitor using a ballpoint pen or similar tool with the sharp tip. 2WARNING Lens fogging To prevent injury or fire, take the following precautions: When you turn on the car heater in cold weather, dew or condensation may form on the lens in the disc player of the unit. Called lens fogging, this condensation on the lens may not allow discs to play.
Quick Start Guide Acquiring GPS signal How To Reset Your Unit The first time you turn on this unit, you must wait while the system acquires satellite signals for the first time. This process could take up to several minutes. Make sure your vehicle is outdoors in an open area away from tall buildings and trees for fastest acquisition. After the system acquires satellites for the first time, it will acquire satellites quickly each time thereafter.
DNX7210BT/DNX5210BT/DNX5510BT/DNX4210BT Safety Precautions and Important Information Read this information carefully before starting to operate the Kenwood Car Navigation System and follow the instructions in this manual. Neither Kenwood nor Garmin shall be liable for problems or accidents resulting from failure to observe the instructions in this manual.
Quick Start Guide First Step 1 Power on the unit and perform some setup steps before using. Touch the corresponding key and set the value. Press the
DNX7210BT/DNX5210BT/DNX5510BT/DNX4210BT 2 Touch [Finish]. NOTE • For details on operations of each setting, refer to the Instruction Manual. 7 B59-2101-00_00_12DNX7_QSG_E.
Quick Start Guide Basic Operations Functions Of The Buttons On The Front Panel DNX7210BT 10 11 1 2 3 4 5 6 7 8 9 8 B59-2101-00_00_12DNX7_QSG_E.
DNX7210BT/DNX5210BT/DNX5510BT/DNX4210BT Number 1 Name fi (Reset) Motion • If the unit or the connected unit fails to operate properly, the unit returns to factory settings when this button is pressed (Instruction Manual P.99). • If the SI function is turned on, this indicator flashes when the vehicle ignition is off (Instruction Manual P.72). 2 ATT • Switches attenuation of the volume on/off. 3 ∞, 5 (Vol) Adjusts volume. 4 AUD • Displays Graphic Equalizer screen (Instruction Manual P.87).
Quick Start Guide DNX5210BT/DNX5510BT/DNX4210BT 1 7 8 9 2 3 4 12 5 6 10 13 11 10 B59-2101-00_00_12DNX7_QSG_E.
DNX7210BT/DNX5210BT/DNX5510BT/DNX4210BT Number 1 Name fi (Reset) Motion • If the unit or the connected unit fails to operate properly, the unit returns to factory settings when this button is pressed (Instruction Manual P.99). • If the SI function is turned on, this indicator flashes when the vehicle ignition is off (Instruction Manual P.72). 2 MENU • Displays the Top Menu screen (Instruction Manual P.17). • Pressing for 1 second turns the power off. • When the power off, turns the power on.
Quick Start Guide Common Operations General There are some functions which can be operated from most screens. [Menu] Returns to the Top Menu screen. (RETURN) Returns to previous screen. (common menu key) Touch to display the common menu. The contents of the menu are as follows. : Displays the EXT SW Control screen. : Displays the SETUP Menu screen. : Displays the Audio Control Menu screen. : Displays the control screen of current source. Icon feature differs depending on the source.
DNX7210BT/DNX5210BT/DNX5510BT/DNX4210BT Detaching The Front Panel You can detach the front panel to prevent theft. Press the <0> button for 1 second to open the front panel. Then, detach the panel as the diagrams below. Detach the panel as the diagram below. 2 3 2 1 1 ● After detaching: Put the panel in the protective bag supplied with the unit. NOTE • To prevent deterioration, do not touch the terminals of the unit and faceplate with your fingers.
Quick Start Guide How To Use The Navigation System 1 2 Press the
DNX7210BT/DNX5210BT/DNX5510BT/DNX4210BT 4 Follow your route to the destination. NOTICE • The speed limit icon feature is for information only and does not replace the driver’s responsibility to abide by all posted speed limit signs and to use safe driving judgment at all times. Garmin and Kenwood will not be responsible for any traffic fines or citations that you may receive for failing to follow all applicable traffic laws and signs. Your route is marked with a magenta line.
Quick Start Guide Other Features ● Manually avoiding traffic on your route 1) 2) 3) 4) From the map, touch the traffic icon. Touch [Traffic On Route]. If necessary, touch the arrows to view other traffic delays on your route. Touch [Avoid]. ● Viewing the traffic map The traffic map shows color-coded traffic flow and delays on nearby. ● About traffic NOTICE • Traffic service is not available in some areas or countries.
DNX7210BT/DNX5210BT/DNX5510BT/DNX4210BT How To Play Music You can play audio files from music CD, disc media, USB storage device and iPod. NOTE • For details on playable file format, media format, iPod model, etc., refer to the Instruction Manual. 1 Connect the media you want to play as shown below. Disc 1) Press the <0> button to open the front panel. 2) Insert the disc into the slot. ● To eject the disc: Press the <0> button. 0 1) Insert the disc into the slot. Playback starts.
Quick Start Guide 2 Control the music you are listening to on the source control screen. The following symbols indicate the keys on the screen. The functions of the keys are the same despite the difference of the source you are listening to.
DNX7210BT/DNX5210BT/DNX5510BT/DNX4210BT How To Play Movie/Picture You can play DVD video, Video CD (VCD), movie files from disc media, iPod, and picture files from USB storage device and SD card. NOTE • For details on playable file format, device format, etc., refer to the Instruction Manual. 1 Connect the media you want to play. For the method of connecting, see How To Play Music (P.17). 2 Control the movie/picture by touching the screen. Each area on the screen has a separate function.
Quick Start Guide How To Listen To The Radio 1 Touch [Menu] on any screen. Top Menu screen appears. 2 Touch [TUNER]. The unit switches to the radio source. 3 Operate on the source control screen. ● Station search ]. 1) Touch [ Sub function menu appears. 2) Touch [AM] or [FM] to select the band. 3) Touch [1] or [¡] to tune in the desired station. ● Auto memory 1) Touch [ ]. Sub function menu appears. 2) Touch [AM] or [FM] to select the band. 3) Touch [ ]. 4) Touch [AME].
DNX7210BT/DNX5210BT/DNX5510BT/DNX4210BT How To Make A Phone Call You can use your Bluetooth cell-phone when paired to this unit. 1 Register your cell-phone to the unit. Follow as the procedures shown below. For detailed operation, see Registering the Bluetooth Unit (P.55) in the Instruction Manual. 1) Press the button and touch [BT SETUP]. 2) Touch [SET] of [Regist New Device] in the Bluetooth SETUP screen. 3) Touch [PIN Code Set] in the Searched Device List screen.
Quick Start Guide 4 Make or receive a phone call. See the table below for each operation method. Call by entering a phone number 1 Touch [Direct Number]. 2 Enter a phone number with number keys. ]. 3 Touch [ Call using call records 1 Touch [Incoming Calls], [Outgoing Calls], or [Missed Calls]. 2 Select the phone number from the list. 3 Touch [ ]. Redial 1 Touch [Redial] to display the previously called number. ]. 2 Touch [ Call using the phonebook 1 Touch [Phonebook]. 2 Select the name from the list.
DNX7210BT/DNX5210BT/DNX5510BT/DNX4210BT Installation Procedure • If the console has a lid, make sure to install the unit so that the faceplate will not hit the lid when closing and opening. • If the fuse blows, first make sure the wires aren’t touching to cause a short circuit, then replace the old fuse with one with the same rating. • Insulate unconnected wires with vinyl tape or other similar material.
Quick Start Guide harness and connect it to the speaker connector in your vehicle. 5 Take Connector A on the wiring harness and connect it to the external power connector on your vehicle. 6 Connect the wiring harness connector to the unit. 7 Install the unit in your car. 8 Reconnect the - battery. 9 Press the button. (P.4) 10 Perform the Initial Setup. See First Step (P.6). Installation Procedure Supplied accessories First of all, make sure that all accessories are supplied with the unit. 1 ...
DNX7210BT/DNX5210BT/DNX5510BT/DNX4210BT Attaching the front panel GPS antenna Hold the front panel securely so as not to drop it accidentally. Fit the panel onto the attaching plate until it is firmly locked. GPS antenna is installed inside of the car. It should be installed as horizontally as possible to allow easy reception of the GPS satellite signals. To mount the GPS antenna inside your vehicle: 1) Clean your dashboard or other surface.
Quick Start Guide Microphone unit NOTE • Install the microphone as far as possible from the cell-phone. 1) Check the installation position of the microphone (accessory 8). 2) Remove oil and other dirt from the installation surface. 3) Install the microphone. 4) Wire the microphone cable up to the unit with it secured at several positions using tape or other desired method.
DNX7210BT/DNX5210BT/DNX5510BT/DNX4210BT Removing the unit Connector Function Guide 1) Remove the hard rubber frame by referring to step 1 in “Removing the hard rubber frame”. 2) Insert the two removal tools (accessory3) deeply into the slots on each side, as shown.
Quick Start Guide Connection Connecting wires to terminals (1) Accessory 8 Accessory 6 Accessory 8 Accessory 6 Fuse (15A) Cooling fan Cooling fan Fuse (15A) Accessory 1 CB 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 2 WARNING for Connecting the ISO Conncetor The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit. The default connection for the wiring harness is described in (1) below.
DNX7210BT/DNX5210BT/DNX5510BT/DNX4210BT Connecting wires to terminals (2) Connect to the vehicle’s parking brake detection switch harness. Accessory 1 Light Green (Parking sensor wire) For best safety, be sure to connect the parking sensor. PRK SW Purple/White (Reverse sensor wire) Connect to vehicle’s reverse lamp harness when using the optional rear view camera.
Quick Start Guide System connection Refer to the box1 below Refer to the box2 below iPod/ AV-IN2 (CA-C3AV; Optional Accessory) input Refer to the box2 below Accessory 1 *1 AV input (CA-C3AV; Optional accessory) To Camera control terminal Accessory 2 Green/Red Green/White Blue/Red To Relay Box *1 DNX4210BT only 1 Rear View Camera Input - Yellow (Visual Input) Audio/Visual Output - Yellow (Visual Output) - White (Audio Left Output) - Red (Audio Right Output) 2 Rear Preout - Red (Audio Right Out
DNX7210BT/DNX5210BT/DNX5510BT/DNX4210BT Optional accessory connection iPod (commercially available) USB device (commercially available) KCA-iP202 (Optional Accessory) USB terminal (0.8m) USB terminal AV Output (1.
Quick Start Guide • ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos. • ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies.
DNX7210BT/DNX5210BT/DNX5510BT/DNX4210BT Declaration of Conformity with regard to the EMC Directive 2004/108/EC Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC Manufacturer: JVC KENWOOD Corporation 3-12, Moriyacho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0022, JAPAN EU Representative’s: Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands English Hereby, Kenwood declares that this unit DNX7210BT, DNX5510BT, DNX5210BT, DNX4210BT is in compliance with the es
B59-2101-00_00_12DNX7_QSG_E.
B59-2101-00_00_12DNX7_QSG_E.
B59-2101-00_00_12DNX7_QSG_E.