DNX7230DAB DNX5230BT DNX5230DAB DNX4230DAB DNX4230BT GPS NAVIGATION SYSTEM Quick Start Guide © 2012 JVC KENWOOD Corporation B59-2179-00_02_13DNX_QSG_E_En.
Quick Start Guide About the Quick Start Guide Contents This Quick Start Guide explains the basic functions of this unit. For functions not covered in this guide, refer to the Instruction Manual (PDF file) contained in the included CDROM “Instruction Manual”. To refer to the Instruction Manual contained in the CD-ROM, a PC loaded with Microsoft® Windows XP/ Vista/7 or Mac OS X® 10.4 or later is required in addition to Adobe® Reader™ 7.1 or Adobe® Acrobat® 7.1 or later.
DNX7230DAB/DNX5230DAB/DNX5230BT/DNX4230DAB/DNX4230BT Precautions unlikely event that a child swallows the battery, immediately consult a physician. Protecting the monitor 2WARNING To protect the monitor from damage, do not operate the monitor using a ballpoint pen or similar tool with the sharp tip. To prevent injury or fire, take the following precautions: Lens fogging • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit.
Quick Start Guide Acquiring GPS signal How to Reset Your Unit The first time you turn on this unit, you must wait while the system acquires satellite signals for the first time. This process could take up to several minutes. Make sure your vehicle is outdoors in an open area away from tall buildings and trees for fastest acquisition. After the system acquires satellites for the first time, it will acquire satellites quickly each time thereafter.
DNX7230DAB/DNX5230DAB/DNX5230BT/DNX4230DAB/DNX4230BT Safety Precautions and Important Information Read this information carefully before starting to operate the Kenwood Car Navigation System and follow the instructions in this manual. Neither Kenwood nor Garmin shall be liable for problems or accidents resulting from failure to observe the instructions in this manual.
Quick Start Guide First Step 1 Power on the unit and perform some setup steps before using. Press the
DNX7230DAB/DNX5230DAB/DNX5230BT/DNX4230DAB/DNX4230BT 2 Touch [Finish]. NOTE • For details on operations of each setting, refer to the Instruction Manual. 7 B59-2179-00_02_13DNX_QSG_E_En.
Quick Start Guide Basic Operations Functions of the Buttons on the Front Panel DNX7230DAB 10 11 1 2 3 4 5 6 7 8 9 How to insert an SD Card 1) Press 8 <0> button for 1 second. The panel fully opens. 2) Hold the SD card as the illustration in the right and insert it into the slot until it clicks. ● To eject the card: Push the card until it clicks and then remove your finger from the card. The card pops up so that you can pull it out with your fingers.
DNX7230DAB/DNX5230DAB/DNX5230BT/DNX4230DAB/DNX4230BT Number 1 Name fi (Reset) Motion • If the unit or the connected unit fails to operate properly, the unit returns to factory settings when this button is pressed (Instruction Manual P.109). • If the Security Indicator (SI) function is turned on, this indicator flashes when the vehicle ignition is off (Instruction Manual P.80). 2 ATT • Switches attenuation of the volume on/off. 3 ∞, 5 (Vol) Adjusts volume.
Quick Start Guide DNX5230DAB/DNX5230BT 4 3 2 1 5 6 7 8 9 How to insert a microSD Card 1) Slide the 4 Release key upward to detach the part of the front panel. 2) Hold the microSD card with the label side facing left and the notched section up, and insert it into the slot until it clicks. ● To eject the card: 1 2 Push the card until it clicks and then remove your finger from the card. The card pops up so that you can pull it out with your fingers.
DNX7230DAB/DNX5230DAB/DNX5230BT/DNX4230DAB/DNX4230BT Number Name Disc insert slot A slot to insert a disc media. 2 0 (Eject) • Ejects the disc. 3 fi (Reset) 1 Motion • Pressing for 1 second ejects the disc forcibly. • If the unit or the connected unit fails to operate properly, the unit returns to factory settings when this button is pressed (Instruction Manual P.109).
Quick Start Guide DNX4230DAB/DNX4230BT 4 3 2 1 5 6 7 8 9 How to insert a microSD Card 1) Open the 9 microSD card slot cover as the illustration in the right. 2) Hold the microSD card with the label facing up and the notched section right, and insert it into the slot until it clicks. ● To eject the card: Push the card until it clicks and then remove your finger from the card. The card pops up so that you can pull it out with your fingers. 12 B59-2179-00_02_13DNX_QSG_E_En.
DNX7230DAB/DNX5230DAB/DNX5230BT/DNX4230DAB/DNX4230BT Number Name Disc insert slot A slot to insert a disc media. 2 0 (Eject) • Ejects the disc. 3 fi (Reset) 1 Motion • Pressing for 1 second ejects the disc forcibly. • If the unit or the connected unit fails to operate properly, the unit returns to factory settings when this button is pressed (Instruction Manual P.109).
Quick Start Guide Common Operations General There are some functions which can be operated from most screens. [Menu] Returns to the Top Menu screen. Touching for at least 1 second displays the Screen Control screen. (Even when an image is dispalyed, touching for at least 1 second displays the Screen Control screen.) (RETURN) Returns to previous screen. (common menu key) Touch to display the common menu. The contents of the menu are as follows. : Displays the EXT SW Control screen.
DNX7230DAB/DNX5230DAB/DNX5230BT/DNX4230DAB/DNX4230BT Detaching The Front Panel You can detach the front panel to prevent theft. Press the <0> button for 1 second to open the front panel. Then, detach the panel as the diagrams below. Slide the Release key upward to detach the part of the front panel. 1 3 2 2 1 ● Attaching the front panel Hold the panel securely so as not to drop it accidentally, and fit it onto the attaching plate until it is firmly locked.
Quick Start Guide How to Use the Navigation System 1 2 1 Press the
DNX7230DAB/DNX5230DAB/DNX5230BT/DNX4230DAB/DNX4230BT 4 Follow your route to the destination. NOTICE • The speed limit icon feature is for information only and does not replace the driver’s responsibility to abide by all posted speed limit signs and to use safe driving judgment at all times. Garmin and JVC KENWOOD will not be responsible for any traffic fines or citations that you may receive for failing to follow all applicable traffic laws and signs. Your route is marked with a magenta line.
Quick Start Guide Other Features ● Manually avoiding traffic on your route 1) 2) 3) 4) From the map, touch the traffic icon. Touch [Traffic On Route]. If necessary, touch the arrows to view other traffic delays on your route. Touch [ ] > [Avoid]. ● Viewing the traffic map The traffic map shows color-coded traffic flow and delays on nearby. ● About traffic NOTICE • Traffic service is not available in some areas or countries.
DNX7230DAB/DNX5230DAB/DNX5230BT/DNX4230DAB/DNX4230BT How to Play Music You can play audio files from music CD, disc media, USB storage device and iPod. NOTE • For details on playable file format, media format, iPod model, etc., refer to the Instruction Manual. 1 Connect the media you want to play as shown below. Disc 1) Press the <0> button to open the front panel. 2) Insert the disc into the slot. ● To eject the disc: Press the <0> button. 0 1) Insert the disc into the slot. Playback starts.
Quick Start Guide 2 Control the music you are listening to on the source control screen. The following symbols indicate the keys on the screen. The functions of the keys are the same despite the difference of the source you are listening to.
DNX7230DAB/DNX5230DAB/DNX5230BT/DNX4230DAB/DNX4230BT How to Play Movie/Picture You can play DVD video, Video CD (VCD), movie files from disc media, iPod and picture files from USB storage device. NOTE • For details on playable file format, device format, etc., refer to the Instruction Manual. 1 Connect the media you want to play. For the method of connecting, see How to Play Music (P.19). 2 Control the movie/picture by touching the screen. Each area on the screen has a separate function.
Quick Start Guide How to Listen to the Radio 1 Touch [Menu] on any screen. Top Menu screen appears. 2 Touch [TUNER]. The unit switches to the radio source. 3 Operate on the source control screen. ● Station search ]. 1) Touch [ Sub function menu appears. 2) Touch [AM] or [FM] to select the band. 3) Touch [4] or [¢] to tune in the desired station. ● Auto memory 1) Touch [ ]. Sub function menu appears. 2) Touch [AM] or [FM] to select the band. 3) Touch [ ]. 4) Touch [AME].
DNX7230DAB/DNX5230DAB/DNX5230BT/DNX4230DAB/DNX4230BT How to Make a Phone Call You can use your Bluetooth cell-phone when paired to this unit. 1 Register your cell-phone to the unit. Follow as the procedures shown below. For detailed operation, see Registering the Bluetooth Unit (P.65) in the Instruction Manual. 1) Touch [Menu] on any screen. Top Menu screen appears. 2) Touch [SETUP]. SETUP Menu screen appears. 3) Touch [Bluetooth]. Bluetooth SETUP screen appears. 4) Touch [Search].
Quick Start Guide 3 Make or receive a phone call. See the table below for each operation method. Call by entering a phone number 1 Enter a phone number with number keys. ]. 2 Touch [ Call using call records 1 Touch [ ] (incoming calls), [ ] (missed calls), or [ 2 Select the phone number from the list. 3 Touch [ ]. ] (outgoing calls). Call using the phonebook ]. 1 Touch [ 2 Select the name from the list. 3 Select the number from the list. 4 Touch [ ].
DNX7230DAB/DNX5230DAB/DNX5230BT/DNX4230DAB/DNX4230BT Installation Procedure • If the fuse blows, first make sure the wires aren’t touching to cause a short circuit, then replace the old fuse with one with the same rating. • Insulate unconnected wires with vinyl tape or other similar material. To prevent a short circuit, do not remove the caps on the ends of the unconnected wires or the terminals. • Connect the speaker wires correctly to the terminals to which they correspond.
Quick Start Guide Unit Installation Procedure 1 To prevent a short circuit, remove the key from the ignition and disconnect the - terminal of the battery. 2 Make the proper input and output wire connections for each unit. 3 Connect the wire on the wiring harness. 4 Take Connector B on the wiring harness and connect it to the speaker connector in your vehicle. 5 Take Connector A on the wiring harness and connect it to the external power connector on your vehicle.
DNX7230DAB/DNX5230DAB/DNX5230BT/DNX4230DAB/DNX4230BT Attaching the front panel GPS antenna Hold the front panel securely so as not to drop it accidentally. Fit the panel onto the attaching plate until it is firmly locked. GPS antenna is installed inside of the car. It should be installed as horizontally as possible to allow easy reception of the GPS satellite signals. To mount the GPS antenna inside your vehicle: 1) Clean your dashboard or other surface.
Quick Start Guide Microphone unit Removing Procedure 1) Check the installation position of the microphone (accessory 8). 2) Clean the installation surface. 3) Install the microphone. 4) Wire the microphone cable up to the unit with it secured at several positions using tape or other desired method. Removing the trim plate 1) Engage the catch pins on the extraction key (accessory 4) and remove the two locks on the lower level. Lower the trim plate (accessory 5) and pull it forward as shown in the figure.
DNX7230DAB/DNX5230DAB/DNX5230BT/DNX4230DAB/DNX4230BT Removing the unit 1) Remove the trim plate by referring to step 1 in “Removing the trim plate”. 2) Insert the two extraction key (accessory4) deeply into the slots on each side, as shown. 4 3) Lower the extraction key toward the bottom, and pull out the unit halfway while pressing towards the inside. NOTE • Be careful to avoid injury from the catch pins on the extraction key.
Quick Start Guide Connection System connection Accessory 8 Accessory 8 Accessory 6 Accessory 6 1 2 2 AV Audio output AV Audio output Accessory 3 Audio/Visual Input Accessory 2 Visual Output Rear view camera input Green/Red Green/White To CMOS-310/CMOS-300 (Optional Accessory) camera control terminal Connect to the vehicle’s parking brake detection switch harness. Light Green (Parking sensor wire) PRK SW For best safety, be sure to connect the parking sensor.
DNX7230DAB/DNX5230DAB/DNX5230BT/DNX4230DAB/DNX4230BT Connecting wires to terminals Fuse (10A) A: Black (Ground wire) B: Yellow (Battery wire) C: Red (Ignition wire) 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 Accessory 1 A CB Fuse (10A) Pin Numbers Cable Color Functions for ISO Connectors External Power Connector A-4 A-5 A-6 A-7 A-8 If no connections are made, do not let the wire come out from the tab.
Quick Start Guide Optional accessory connection DAB antenna CX-DAB1 (Optional accessory) External I/F 2 3 1 5V=1A 5V=1A USB terminal (0.8 m) USB terminal (0.8 m) iPod (commercially available) USB terminal (0.8m) USB device (commercially available) USB maximum power supply current 1A : DC 5 V KCA-iP202 (Optional Accessory) Audio Output (1.
DNX7230DAB/DNX5230DAB/DNX5230BT/DNX4230DAB/DNX4230BT information on how to complete your registration. • DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license. About this Unit ■■Copyrights • The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners.
Quick Start Guide ■■The marking of products using lasers CLASS 1 LASER PRODUCT The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.
DNX7230DAB/DNX5230DAB/DNX5230BT/DNX4230DAB/DNX4230BT Declaration of Conformity with regard to the EMC Directive 2004/108/EC Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC Manufacturer: JVC KENWOOD Corporation 3-12, Moriyacho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0022, JAPAN EU Representative’s: KENWOOD Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands English Hereby, JVC KENWOOD declares that this unit DNX7230DAB, DNX5230DAB, DNX5230BT, DNX4230DAB, DNX4230
B59-2179-00_02_13DNX_QSG_E_En.