Owner's manual

4
Quick Start Guide
Acquiring GPS signal
Thefirsttimeyouturnonthisunit,youmust
waitwhilethesystemacquiressatellitesignals
forthefirsttime.Thisprocesscouldtakeup
toseveralminutes.Makesureyourvehicle
isoutdoorsinanopenareaawayfromtall
buildingsandtreesforfastestacquisition.
Afterthesystemacquiressatellitesforthefirst
time,itwillacquiresatellitesquicklyeachtime
thereafter.
About the front panel
Whenremovingtheproductfromtheboxor
installingit,thefrontpanelmaybepositioned
attheangleshownin(Fig.1).Thisisduetothe
characteristicsofmechanismtheproductis
equippedwith.
Whentheproductisfirstpoweredonworks
properly,thefrontpanelwillautomaticallymove
intotheposition(initialsettingangle)shownin
(Fig.2).
(Fig.1)
(Fig.2)
Cleaning the Unit
If the front panel of this unit is
stained, wipe it with a dry soft cloth
such as a silicon cloth. If the front
panel is stained badly, wipe the
stain off with a cloth moistened with
neutral cleaner, then wipe it again
with a clean soft dry cloth.
•Applying spray cleaner directly to the
unit may affect its mechanical parts.
Wiping the front panel with a hard cloth
or using a volatile liquid such as thinner
or alcohol may scratch the surface or
erase screened print.
How to Reset Your Unit
If the unit or the connected unit fails
to operate properly, reset the unit.
1
Press the <Reset> button.
The unit returns to factory settings.
NOTE
•DisconnecttheUSBdevicebeforepressing
the<Reset>button.Pressingthe<Reset>
buttonwiththeUSBdeviceconnectedcan
damagethedatastoredintheUSBdevice.
ForhowtodisconnecttheUSBdevice,see
How to Play Music (P.19).
•Whentheunitisturnedonafterresetting,
theInitialSETUPscreenappears.See First
Step (P.6).
B59-2179-00_02_13DNX_QSG_E_En.indd 4 13/01/11 10:52