Operation Manual

mini processor bowl
U
se the mini processor bowl to
chop herbs and process small
q
uantities of ingredients e.g.
m
eat, onion, nuts, mayonnaise,
vegetables, purées, sauces and
b
aby food.

mini processor knife blade

mini processor bowl
to use the mini
processor bowl
1
Fit the drive shaft and bowl onto
the power unit.
2 Fit the mini processor bowl -
ensuring the ribs on the inside
of the mini bowl chimney align
with the slots in the main bowl
chimney .
3 Place the knife blade over the
drive shaft .
4 Add the ingredients to be
processed.
5 Fit the lid and switch on.
safety
●
Never remove the lid until the knife blade has completely
stopped.
●
The knife blade is very sharp - always handle with care.
important
●
Don’t process spices – they may damage the plastic.
●
Don’t process hard food such as coffee beans, ice cubes or
chocolate – they may damage the blade.
hints
●
Herbs are best chopped when clean and dry.
●
Always add a little liquid when blending cooked ingredients to
make baby food.
●
Cut foods such as meat, bread, vegetables into cubes
approximately 1-2 cm (
1
⁄2 –
3
⁄4 in) before processing.
●
When making mayonnaise add the oil down the feed tube.
KENSTORE™ attachments carousel
Y
our food processor is supplied with an attachment storage
carousel that fits inside the bowl.
to use the storage carousel
1
Fit the knife blade to the bowl.
2 Then fit the whisk, discs and canopy into the carousel .
3 Fit the carousel over the knife blade and place the processor lid
o
n top .
care & cleaning
●
Always switch off and unplug before cleaning.
●
Handle the blades and cutting discs with care - they are
extremely sharp.
●
Some foods may discolour the plastic. This is perfectly normal
and won’t harm the plastic or affect the flavour of your food. Rub
with a cloth dipped in vegetable oil to remove the discolouration.
power unit
●
Wipe with a damp cloth, then dry.
Ensure that the interlock area is
clear of food debris.
●
Store excess cord in the storage
area at the back of the
machine .
liquidiser/mill
1 Empty the jug/jar before unscrewing
it from the blade unit.
2 Wash the jug/jar by hand.
3 Remove and wash the seals.
4 Don’t touch the sharp blades – brush them clean using hot
soapy water, then rinse thoroughly under the tap. Don’t
immerse the blade unit in water.
5 Leave to dry upside down.
6
m
u
l
t
i
p
r
o
m
u
l
t
i
p
r
o

