Kenwood Limited, New Lane, Havant, Hampshire PO9 2NH, UK www.kenwoodworld.
pro fessi ona l ste am ing iron em syst IC400 series IC450 series
UN FO LD
pro s fes ion ing ron mi t ea al s tem sys
● safety Never unscrew the boiler cap whilst ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● the unit is pressurised. Steam will shoot out and burn you. Don’t get burnt by the iron’s steam, hot water, soleplate or iron rest. Keep children away from the steam station. And make sure they can’t grab the cords and pull the steam station down. Trailing cords are a hazard, keep them out of the way to prevent accidents. Never iron clothes being worn.
● 2 Fit the cord cactus into one of the cord cactus locations. Place the steam supply cord into one of the grooves on the other end of the cord cactus. This will keep the cord in an upright position. This iron complies with European Economic Community Directive 89/336/EEC. before using for the first time 1 Remove all packaging and any stickers or labels. 2 Wind excess cord around the base of the steam station. 3 Test the iron on an old cloth to make sure the soleplate and boiler are clean.
setting the temperature 4 VERY SLOWLY unscrew the boiler cap. If any steam is heard, stop unscrewing the cap and wait until all the steam has gone. Once all the steam has gone continue to slowly unscrew the cap. 5 Use the funnel provided and slowly refill the boiler by pouring the water down the side of the funnel. Take care not to overfill. 6 Screw the boiler cap back on until it is completely tight. 7 Plug in the appliance.
PTFE soleplate (model IC450 only) The soleplate can be fitted when ironing delicate items such as silk. Follow the instructions given on the packaging and keep them handy for future use. Always take care when fitting, particularly if the iron is hot. 4 Before starting to iron or if you have not used the steam function for a few minutes or if you have recently cleaned the steam station, hold the iron away from your ironing and press the steam button several times.
● ● service and customer care the outside soleplate Don’t scratch the outside by ironing anything hard eg zips. To remove minor remains of material stuck to the soleplate, rub lengthways with a soft, damp, nonmetallic cleaning pad. ● If the cord is damaged it must, for safety reasons, be replaced by KENWOOD or an authorised KENWOOD repairer. UK If you need help with: ● using your steam station ● servicing or repairs (in or out of guarantee) call Kenwood customer care on 023 9239 2333.
