Owner manual

Use your new Kenwood Citrus
Juicer to squeeze the juice from
citrus fruit eg oranges, lemons, limes
and grapefruits.
safety
Switch off and unplug:
before fitting or removing parts
after use
before cleaning.
Never let the power unit, cord or
plug get wet.
Never use a damaged machine. Get
it checked or repaired: see ‘service’.
Don’t let the cord touch hot surfaces
or hang down where a child could
grab it.
Don’t let children or infirm people
use the machine unsupervised.
Don’t let children play with the
machine.
Only use the machine for its
intended domestic use.
important
Don’t press too hard on the
cone or run for longer than 10
minutes - you may damage
your juicer.
before plugging in
Make sure your electricity supply is
the same as the one shown on the
underside of the machine.
important (UK) only
The wires in the cord are coloured
as follows:
Blue = Neutral, Brown = Live.
This machine complies with
European Economic Community
Directive 89/336/EEC.
before using for the first time
1 Remove all packaging and any
labels.
2 Wash the parts: see ‘cleaning’.
3 Wrap any excess cord around the
bracket on the underside of the
power unit .
key
dust cover
cone
strainer
juice collector with pouring lip
power unit
cord wrap
to use your citrus juicer
1 Place the juice collector on to the
power unit .
2 Put the strainer inside the juice
collector , then add the cone .
3 Cut the fruit in half. Then press each
half down on to the cone and the
juicer will operate automatically.
During use the cone may change the
direction it rotates. This is normal
and ensures that the maximum
amount of juice is squeezed out of
the fruit.
To help with juice extraction move
the fruit from side to side.
4 To stop the juicer lift the fruit from
the cone.
5 To pour the juice, remove the cone
and strainer from the juice collector
and pour using the pouring lip.
When juicing large quantities, empty
the strainer regularly to prevent the
build up of pulp and seeds. Empty
the juice collector as required.
cleaning
Always switch off, unplug and
dismantle before cleaning.
Replace the dust cover after use.
power unit
Wipe with a damp cloth, then dry.
other parts
Wash in hot soapy water, then dry.
Alternatively they can be washed on
the top rack of your dishwasher.
2
English