ENGLISH KA-S10 STEREO INTEGRATED AMPLIFIER INSTRUCTION MANUAL FRANÇAIS DEUTSCH NEDERLANDS ITALIANO LA DICHIARAZIONE DI CONFORMITA' "CE" DI QUESTO PRODOTTO E' DEPOSITATA PRESSO: KENWOOD ELECTRONICS EUROPE B.V.
Before applying power Caution : Read this page carefully to ensure safe operation. Units are designed for operation as follows. Australia .............................................. AC 240 V only Europe . ...............................................
IMPORTANT SAFETY INSTRUCTIONS Read Instructions – All the safety and operating instructions should be read before the product is operated. Retain Instructions – The safety and operating instructions should be retained for future reference. Heed Warnings – All warnings on the product and in the operating instructions should be adhered to. Follow Instructions – All operating and use instructions should be followed. 12.
Special features Three sets of input connectors Considering connection with a portable component with a low audio output level, an analog input with high input gain (D.AUDIO) is provided in addition to two analog inputs for ordinary desktop components (CD, AUX). Subwoofer output connector ENGLISH A subwoofer with built-in amplifier and pin jack input can be connected to this unit. N.B.
Connections Connecting the playback components CAUTION CONNECTION PRECAUTIONS ENGLISH Do not connect the power cord plug into the power outlet until all other connections are complete. Before unplugging a cord or cable from the unit, be always sure to set the POWER switch to OFF and unplug the power plug from the power outlet. CAUTION Simply setting the POWER switch to OFF does not shut down the power supplied to the unit completely.
Connections Connecting the speakers CONNECTION PRECAUTIONS Powerd subwoofer Speakers (Impedance 6 Ω - 16 Ω) Left 1 Strip coating 2 Loosen 3 Insert 4 Secure Right ÷ Never short-circuit the "+" and "–" speaker cords. It may cause malfunction. ÷ If the "+" and "–" polarity are inverted, the sound will be unnatural with unclear positioning of musical instruments, etc. ÷ Be sure to insert all connection cords securely.
Controls and indicators VOLUME INPUT SELECTOR POWER N.B.CIRCUIT AUX ON 1 OFF 2 OFF 3 ENGLISH CD D.AUDIO MIN MAX STEREO INTEGRATED AMPLIFIER KA-S10 1 2 3 1 POWER switch Switches the power ON and OFF. 2 VOLUME knob Rotating the knob clockwise increases the volume level, and rotating the knob counterclockwise decreases the volume level. 4 5 4 INPUT SELECTOR knob Selects the input source (D.AUDIO, CD or AUX). 5 N.B. CIRCUIT knob Adjusts the bass tone in three steps.
Operation 1. Switching the power on (off). POWER ON 2. Selecting the desired input sources. When CD is selected. Turn the INPUT SELECTOR knob in either direction to select the source. The input indicator for the selected input source lights up. INPUT SELECTOR AUX CD D.AUDIO 3. Adjusting volume. Decrease volume Increase volume VOLUME MIN Turn the VOLUME knob in either direction to adjust the volume.
Contents Caution : Read the pages marked carefully to ensure safe operation. Before applying power ............................................ 2 Connections ..................................................................... 6 Safety precautions ............................................................... 2 Connecting the playback components .................................... 6 Connecting the speakers ........................................................... 7 IMPORTANT SAFETY INSTRUCTIONS .
In case of difficulty What seems to be a malfunction is not always so. Before calling for service, check the following table according to the symptom of your trouble. Symptom Remedy ENGLISH Sound is not produced. ÷ Connect properly referring to "Connections". 67 ÷ Adjust to a required volume. 9 ÷ Select the desired input source with the INPUT SELECTOR knob. 9 No sound is output or noise interferes. ÷ The speaker protection circuit may be activated.