KEN WOOD K CA-BT100 Bluetooth HANDS FREE BOX INSTRUCTION MANUAL POITIER MAINS-LIB RES Bluetooth MODE EMPLOY'S CARA DE MASON LIB RES Bluetooth MANUAL DE INSTRUCTIONS Ken wood Corporation ©) Bluetooth’ Take the time to read through this instruction manual, Familiarity with installation and operation procedures will help you obtain the best performance from your new Bluetooth hands free box.
Contents Before Use For Audio receiver Safety Precautions General Features 6 Answering a Phone Call é Notes Switching to the Private Mode 6 Clearing the Disconnection Message 8 = Adjusting the Voice Volume during a Call Disconnecting a Call 6 Setting up the Bluetooth Function Switching between Display Modes 6 Before Use Registering Your Cell-Phone Downloading the Phone Book Dialing Method Selecting the Dialing Mode Making a Call by Entering a Phone Number Dialing by Using the Quick Dialing Function Register
Safety Precautions WARNING To prevent injury or fire, take the following precautions: « To prevent a short circuit, never put of leave any metallic objects (such as coins or metal tools) inside the unit. Mounting and wiring this product requires skills and experience. For safety’s sake, leave the mounting and wiring work to professionals, CAUTION To prevent damage to the machine, take the following precautions: + Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity.
Notes If you experience problems during installation, consult your Ken wood dealer. When you purchase optional accessories, check with your Ken wood dealer to make sure that they work with your model and in your area, The illustrations of the display and the panel appearing in this manual are examples used ta explain more dearly how the controls are used.
Setting up the Bluetooth Function Before Use Downloading the Phone Book « You need to register your cell-phone before using it with this unit. For more details, see (page 5) if you have registered two or more cell-phones, you need 10 select one of them. For more details, see «Selecting the Cell-Phone You Wish to Connects {page 10) or «Selecting a Hands-Free Phone> (page 17 Torus the Phone Book; t-must be downloaded to this unit in advance.
General Features (7 Aud revive) Answering a Phone Call When "CALL or “Call” is displayed, "(Calling party name)" or "(Phone number)" is also displayed. Press the [AUDIO] button or one buttons. Rejecting an Incoming Call Press the {ATT] button for at least 1 second. You can set up the unit so that the incoming call is received after lapse of a predetermined time. For more details, see tinseling the Time interval for Automatic Answers (page 11) Inserting a disc such a5 3 CO will disconnect your call.
Dialing Method (ry Audi revive) Selecting the Dialing Mode You can dial In five different ways. 1 Enter the dialing method selection mode Press the [ATT] button for at least 1 second. “DIAL or "N-DIAL is displayed 2 Celesta dialing method Press the Control knob Pressing this knob toggles between the following dialing methods: For the Audio receiver with Multi-function Key System: 1 Press the [NEXT] button. Select the key function section.
Dialing Method (Vor ludo receiver) Registering to the Preset Dial Number List You can register up to 3 phone numbers for quick dialing.
2 Select a name or phone number Push the Control knob towards [FM] or [AM]. 3 make a call Press the Control knob for at least 1 second, “CALL or "Call" is displayed. + The outgoing call fists the fist of calls originated farm SIS GATE TTS BOT ThE Dig Stared in the ell phisher rosemary. On the control unit that displays three rows, the phone number in the middle row is the selected one.
Menu System (fur /udv receiver) Menu System Set up various functions, The Menu system basic operation method is explained here, The reference for the Sent items and their setting content is after this operation explanation, 1 Enter Menu mode Press the [MENU] button for at feast 1 second. "MENU is displayed. 2 Select the menu item Push the Control knob towards [FM] or [AM]. 3 Set the menu item Push the Control knob towards [a] or [wm], 4 Exit Menu mode Press the [MENU] button.
if your control unit supports a graphic display function: 1 Select the status display item Push the Control knob towards [FM] or [AM]. Select the "Phone Status” display. 2 Display the statuses Push the Control knob towards [1] or [mm].
Hands-Free Unit Control (or Monitor receiver) Hands-Free Unit control 18] Displays the signal strength * The more the number of bar segments, the stronger the signal. [ERE] Demoniacal 18] Displays the present Alta Answering status a Posties ifs < When Auto Answering When Auto Answering is off Displays the battery drain of the cell-phone. The more the number of bar segments, the higher the battery level 1 Starts the call. Ends the call. Clears the phone number being entered Clears the entered phone number.
Remote Controller Key Operation Key During a cal: Adjusts the voice volume. + [28 [Crikey 17 [SRC] key During a call: Ends the call. During a call: Ends the call [18 key (When 24 is set to "AUD" Number dial input: Inputs [FM+] key (When 29 is set to "AUD" Number dial input: Inputs 20 [AM-key (When 21s set to "AUD" Number dial input: Inputs". 21) [ra] key (When Zs set to "GAUDY Number dial input: Clears the entered phone number.
Hands-Free Unit Control (ir omission revive) When Called When you receive a call, you can use the hands-free phone. 1 Responds toa call E a When a call arrives, the Hands-Free Control screen appears automatically. 2 End the call The previous screen reappears. When Dialing Make a call by entering a phone number. 1 Enter a phone number Make a call Bm You can start talking when the destination respond. + To clear your incorrect entry, touch Icon. 3 End the call The previous screen reappears.
Calling by Phone Book You can call a person using his/her phone number that you have registered in the Phone Book. 1 Display the Phone Book screen & am The Initial Input screen appears. Initial input screen Phone Book List (1) Scrolls the character array display, 2) Displays the Phone Book beginning with the name whose first character you have touched. {3 Returns to the Hands-Free Control screen. 2 Select the initial character of a person name in memory Gan The Phone Book List screen appears.
Hands-Free Unit Control (rr ions receiver) 5 Endothelial Redialing You can redial, one of the fast 10 phone numbers that you have called or received. a 1 Display the Search for Out Going Calls or Incoming Calls screen The previous screen reappears. WC Or Going Calls or + The Out Going Calls list screen or incoming Calls list Wa (coming Calls screen shows the list of the calls originated from ar received at this unit. They are npt the ones stored in the cell-phone memory.
« Either the time interval for automatic answer set on this unit or the time interval set on the cell-phone, whichever is shorter, takes effect. » Select the speaker which is further from the microphone in order to prevent howling or echos. Selecting a Hands-Free Phone You can choose the Hands-Free phone from the fist.
Accessories/ Installation Procedure Accessories Installation Procedure 1 . To prevent a short circuit, remove the key from the ignition and disconnect the O battery. . Set the display character conversion function switch. . Make the proper input and output wire connections for each unit, Install the unit in your car. 5. Reconnect the & battery. 6. Press the reset button on the control unit.
Connection Accessory Dm Hands-Free Box KEN WOOD Nose x + Disc changer Input f ES Control Unit Connection cable (Provided with the Display character conversion switch disc charger) For the operation method refer to «Display Character Conversion Function (page 18) Disc Cha Connector for external device Items sold separately such as a disc changer snd KCAiP500 can be connected here, For the connectable units, refer ta the Instruction Manual that comes with your contra unit.
Installation Installation the Hands-Free Box A Determine the installation position after making sure that the unit can communicate with the cell-phone. Please do not install the unit near the dashboard, the rear tray, of other important components. Doing so could lead te injury or accident should the unit come off due ta a shock and strike a person or an important component. Tapping craws should be used for mounting.
Troubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight commiseration or misfiring. Before calling service, first check the following table for possible problems. ? The hands-free talk volume is low. The hands free talk volume is set at a low level. «The hands-free talk volume can be adjusted independently. Adjust it during hands-free talk. ~~ No sound is heard from the rear speakers.