Bluetooth HANDS FREE BOX KCA-BT100 INSTRUCTION MANUAL © B64-3479-00/01 (MW)
Contents Safety Precautions Notes 3 4 Setting up the Bluetooth Function 5 Before Use Registering Your Cell-Phone Downloading the Phone Book 5 5 5 General Features Answering a Phone Call Switching to the Private Mode Clearing the Disconnection Message Adjusting the Voice Volume during a Call Disconnecting a Call Switching between Display Modes Dialing Method Selecting the Dialing Mode Making a Call by Entering a Phone Number Dialing by Using the Quick Dialing Function Registering to the Preset Dial Num
Safety Precautions 2WARNING To prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. • Mounting and wiring this product requires skills and experience. For safety’s sake, leave the mounting and wiring work to professionals.
Notes • If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used.
Setting up the Bluetooth Function Before Use Downloading the Phone Book • You need to register your cell-phone before using it with this unit. For more details, see (page 5). • If you have registered two or more cell-phones, you need to select one of them. For more details, see (page 10) or (page 17). • To use the Phone Book, it must be downloaded to this unit in advance.
General Features (For Audio receiver) Answering a Phone Call When "CALL" or "Call" is displayed, "(Calling party name)" or "(Phone number)" is also displayed. Press the [AUDIO] button or one of [1] – [6] buttons. Rejecting an Incoming Call Press the [ATT] button for at least 1 second. • You can set up the unit so that the incoming call is received after lapse of a predetermined time. For more details, see (page 11).
Dialing Method (For Audio receiver) Selecting the Dialing Mode You can dial in five different ways. 1 Enter the dialing method selection mode Press the [ATT] button for at least 1 second. "DIAL" or "N-DIAL" is displayed. 2 Select a dialing method Press the Control knob ([38]). Pressing this knob toggles between the following dialing methods: For the Audio receiver with Multi-function Key System: 1 Press the [NEXT] button. Select the key function section. 2 Press the [1] ("DIAL") – [4] ("IN-C") button.
Dialing Method (For Audio receiver) Registering to the Preset Dial Number List You can register up to 3 phone numbers for quick dialing.
Remote Control (For Audio receiver) 2 Select a name or phone number Functions of the buttons Push the Control knob towards [FM] or [AM]. 3 Make a call Press the Control knob ([38]) for at least 1 second. "CALL" or "Call" is displayed. [SRC] button* During a call: End the call. [VOL] buttons* During a call: Adjusts the voice volume. [ • The outgoing call list is the list of calls originated from this unit. It is not the one stored in the cell-phone memory.
Menu System (For Audio receiver) Menu System Set up various functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 2 Select the menu item Push the Control knob towards [FM] or [AM]. 3 Set the menu item Push the Control knob towards [4] or [¢]. 4 Exit Menu mode Press the [MENU] button.
1 Select the status display item Push the Control knob towards [FM] or [AM]. Select the "Phone Status" display. 2 Display the statuses Push the Control knob towards [4] or [¢]. All statuses are indicated with icons. 3 Exit Menu mode Press the [MENU] button. Setting the Time Interval for Automatic Answer This function automatically answers (responds to) a call after lapse of the preset time interval for automatic answer. Display Setting "Auto Answer: OFF"/ Does not answer the phone call automatically.
Hands-Free Unit Control (For Monitor receiver) Hands-Free Unit control Hands-Free Control screen Or when a call comes in … TEL Hands-Free Control screen 9 8 Hands 10 AUTO Free K E N WO O D 1 2 11 0123456789 P1 1 2 3 4 5 6 7 8 9 * 0 # 15 P2 3 12 P3 6 4 5 S e t Up + 13 Clear 14 7 Return Control screen DV D V I D E O 13:50 8 Displays the signal strength.* The more the number of bar segments, the stronger the signal.
Remote Controller Key Operation 17 18 19 24 20 25 21 26 SRC 22 27 28 23 u [SRC] key During a call: Ends the call. i [*] key (When f is set to "AUD") Number dial input: Inputs "+". o [FM+] key (When f is set to "AUD") Number dial input: Inputs "#". ; [AM-] key (When f is set to "AUD") Number dial input: Inputs "*". a [4] key (When f is set to "AUD") Number dial input: Clears the entered phone number. s [0] – [9] key (When f is set to "AUD") Number dial input: Inputs a phone number digit.
Hands-Free Unit Control (For Monitor receiver) When Called Quick Dialing When you receive a call, you can use the hands-free phone. You can register up to 3 phone numbers for quick dialing. 1 To register a phone number: Responds to a call 1 When a call arrives, the Hands-Free Control screen appears automatically. 2 2 End the call Display a phone number you wish to register See the (page 15), (page 16) and (page 14).
Calling by Phone Book 3 Select a destination you wish to call You can call a person using his/her phone number that you have registered in the Phone Book. 1 Name Display the Phone Book screen 4 Confirm the destination OK The Initial Input screen appears. The Hands-Free Control screen appears again. The selected destination data is displayed.
Hands-Free Unit Control (For Monitor receiver) Redialing 5 End the call You can redial, one of the last 10 phone numbers that you have called or received. 1 Display the Search for Out Going Calls or Incoming Calls screen The previous screen reappears. Out Going Calls • The Out Going Calls list screen or Incoming Calls list screen shows the list of the calls originated from or received at this unit. They are not the ones stored in the cell-phone memory.
Deleting the Hands-Free Phone • Either the time interval for automatic answer set on this unit or the time interval set on the cell-phone, whichever is shorter, takes effect. • Select the speaker which is further from the microphone in order to prevent howling or echos. You can cancel a registration of Hands-Free phone. 1 S e t Up 2 Selecting a Hands-Free Phone You can choose the Hands-Free phone from the list.
Accessories/ Installation Procedure For Good Reception To assure good reception, note the following: Accessories 1 3 m ..........1 2 ..........2 3 ..........1 Installation Procedure 1. To prevent a short circuit, remove the key from the ignition and disconnect the - battery. 2. Set the display character conversion function switch. 3. Make the proper input and output wire connections for each unit. 4. Install the unit in your car. 5. Reconnect the - battery. 6. Press the reset button on the control unit.
Connection Accessory 1 (3 m) Hands-Free Box Control Unit TO HEAD UNIT Disc changer input MIC TO 5L I/F 1 2 (1.5 m) Display character conversion switch For the operation method refer to (page 18). Connection cable (Provided with the disc changer) Disc Changer Connector for external device Items sold separetely such as a disc changer and KCAiP500 can be connected here. For the connectable units, refer to the Instruction Manual that comes with your control unit.
Installation Installation the Hands-Free Box • Determine the installation position after making sure that the unit can communicate with the cell-phone. • Please do not install the unit near the dashboard, the rear tray, or other important components. Doing so could lead to injury or accident should the unit come off due to a shock and strike a person or an important component. Tapping screws should be used for mounting. (Attachment with velcro strips, although easy, can come off with a shock.
Troubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. ? The hands-free talk volume is low. ✔ The hands-free talk volume is set at a low level. ☞ The hands-free talk volume can be adjusted independently. Adjust it during hands-free talk. ? No sound is heard from the rear speakers. ✔ You are talking in the hand-free talk mode.