KCA-XM100V XM Satellite Radio Interface BOX INSTRUCTION MANUAL BOÎTIER d'interface Radio Satellite XM MODE D'EMPLOI CAJA de Interfaz de radio satélite XM MANUAL DE INSTRUCCIONES Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new XM Satellite Radio Interface BOX.
Safety Precautions 2WARNING • Mounting and wiring this product requires skills and experience. For safety’s sake, leave the mounting and wiring work to professionals. • If you experience problems during installation, consult your Kenwood dealer. • Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. • Do not use your own screws. Use only the screws provided.
Connection Control unit KCA-XM100V RF antenna (Accessory 1) XM Mini Tuner (optional accessory) loading slot Installation Control unit If you cannot install the unit in the glove box, fix it on the floorboard using the screws provided (Accessory 3 ; φ4×8mm) and commercial L brackets (thickness: 1.6mm). KCA-XM100V Double-sided tape (Accessory 2) English | KCA-XM100V_AL.indb 3 3 08.2.
Antenna Installation Install the RF antenna (Accessory 1) on the trunk lid or roof. The RF antenna can be installed with magnetic force of the magnet embedded in the antenna. Install the RF antenna while parking at the place where the reception is good.
Specifications XM Receiver Frequency range : 2332.500 - 2345.000 MHz General Operational temperature range : –10 °C to + 60 °C Storage temperature range : –20 °C to + 85 °C Dimensions (W × H × D) : 97 × 32 × 95 mm 3-13/16 × 1-2/8 × 3-6/8 inch Weight : 310 g (0.7 lbs) RF antenna Unit Output impedance : 50 Ω / SMB connector Operating voltage : 5V Current consumption : 55 mA Cable length :7m Installation Size (W × H × D) : 36 × 14 × 44 mm 1-7/16 × 9/16 × 1-6/8 inch Weight : 70 g (0.
Précautions de sécurité 2AVERTISSEMENT • Le montage et le câblage de ce produit nécessitent des compétences et de l'expérience. Pour des raisons de sécurité, laissez un professionnel effectuer le travail de montage et de câblage. • Si vous rencontrez des problèmes pendant l’installation, consultez votre revendeur Kenwood. • N’installez pas l’appareil dans un endroit exposé directement à la lumière du soleil, à une chaleur excessive ou à l’humidité.
Connexion Unité de commande KCA-XM100V Antenne RF (Accessoire 1) Fente d'insertion pour syntoniseur Mini XM (accessoire en option) Installation Unité de commande Si vous ne pouvez pas installer l'unité dans la boîte à gants, fixez-la au plancher à l'aide des vis fournies (Accessoire 3 ; φ4×8mm) et de pattes de fixation en L disponibles dans le commerce (épaisseur : 1,6mm). KCA-XM100V Ruban adhésif double-face (Accessoire 2) Français | KCA-XM100V_AL.indb 7 7 08.2.
Installation de l'antenne Installez l'antenne RF (Accessoire 1) sur le couvercle du coffre ou sur le toit. L'antenne RF peut être installée grâce à la force magnétique de l'aimant intégré dans l'antenne. Installez l'antenne RF en vous garant à un endroit où la réception est bonne.
Caractéristiques techniques Récepteur XM Bande de fréquences : 2332,500 - 2345,000 MHz Généralités Plage de température de fonctionnement : –10 °C à + 60 °C Plage de température de stockage : –20 °C à + 85 °C Dimensions (L × H × P) : 97 × 32 × 95 mm 3-13/16 × 1-2/8 × 3-6/8 pouces Poids : 310 g (0,7 lbs) Unité antenne RF Impédance de sortie : 50 Ω / SMB connecteur Tension de fonctionnement : 5V Courant absorbé : 55 mA Longueur du câble :7m Dimensions d'installation (L x H x P) : 36 × 14 × 44 mm 1-7/16 × 9/
Precauciones de seguridad 2ADVERTENCIA • La instalación y conexión de este producto requiere de capacitación y experiencia. Para mayor seguridad, deje el trabajo de instalación y conexión a un profesional. • Si tiene problemas durante la instalación, consulte con su distribuidor Kenwood. • No instale la unidad en un punto expuesto a la luz solar directa, al calor excesivo o a la humedad. Además deberá evitar sitios con mucho polvo o la posibilidad de que se derrame agua sobre ella.
Conexión Unidad de control KCA-XM100V Antena RF (Accesorio 1) Ranura de carga (accesorio opcional) del mini sintonizador XM Instalación Unidad de control Si no puede instalar la unidad en la guantera, fíjela por debajo de esta utilizando los tornillos suministrados (Accesorio 3 ; φ4 × 8 mm) y los soportes en L comerciales (grosor: 1,6 mm). KCA-XM100V Cinta de dos caras (Accesorio 2) Español | KCA-XM100V_AL.indb 11 11 08.2.
Instalación de antena Instale la antena RF (Accesorio 1) por abajo del cofre o en el techo. La antena RF se puede instalar por medio de la fuerza magnética a través de los imanes incrustados en la antena. Instale la antena RF aparcándose en un lugar donde exista buena recepción.
Especificaciones Receptor XM Rango de frecuencia : 2332,500 - 2345,000 MHz General Rango de temperatura operacional : –10 °C a + 60 °C Rango de temperatura de almacenamiento : –20 °C a + 85 °C Dimensiones (An × Al × P) : 97 × 32 × 95 mm 3-13/16 × 1-2/8 × 3-6/8 pulgadas Peso : 310 g (0,7 lbs) Unidad de la antena de RF Impedancia de salida : 50 Ω / SMB conector Voltaje de operación : 5V Consumo de corriente : 55 mA Longitud de cable :7m Tamaño de instalación (An × Al × P) : 36 × 14 × 44 mm 1-7/16 × 9/16 × 1
KCA-XM100V_AL.indb 14 08.2.
KCA-XM100V_AL.indb 15 08.2.
KCA-XM100V_AL.indb 16 08.2.