Owner manual

ManualsBrandsKenwood ManualsReceivers and AmplifiersKDC-BT32U

KDC-BT42U

KDC-BT32U

CD-RECEIVER

INSTRUCTION MANUAL

Before reading this manual, click the button below to check the latest

edition and the modified pages.

http://manual.kenwood.com/edition/im347/

CONTENTS

Safety 2

Maintenance

Preparation 3

How to attach/detach the faceplate

How to reset your unit

Remote controller

Basic Operations 4

Getting Started 6

Canceling the display demonstration

Setting the demonstration mode

Adjusting the clock

Initial settings before operations

Listening to the Radio 8

Adjust [SETTINGS] mode settings

Listening to the other external

components 9

Listening to a Disc/ USB device/ iPod

Start playing a disc

Start playing a USB device or iPod

Removing the USB device or iPod

Selecting Repeat Play

Selecting Random Play

All Random Play

Selecting a folder/track/file

Alphabet Search for iPod

Selecting App & iPod Control Mode

Adjust [SETTINGS] mode settings

Getting Started of Bluetooth 14

Registering your Bluetooth device with this

unit (Pairing)

Registering from Bluetooth devices (Pairing)

Operation of Hands-Free Phoning 16

Making a Call

Make a Voice Dialing Call

Receiving a Call

During a Call

Switching between Two Connected Cell-

phones

Clearing the disconnection message

Downloading the Phone Book

Listening to a Bluetooth Audio 19

Selecting Repeat Play

Selecting Random Play

Bluetooth Setup 20

Selecting the Bluetooth Device

Bluetooth Device Registration Test

Bluetooth Setup

Function settings 22

Using the remote controller

(KCA-RC405) 24

Remote sensor

Changing the battery of the remote control

unit

Operation of Hands-Free Phoning

Direct Access Tuning of “TUNER” source

Direct Music Search of “USB” source

Installation/connection 26

Troubleshooting 31

Specifications 33

Check the latest edition

Summary of content (18 pages)

PAGE 1
CONTENTS Safety 2 Maintenance Preparation 3 How to attach/detach the faceplate How to reset your unit Remote controller KDC-BT42U KDC-BT32U CD-RECEIVER INSTRUCTION MANUAL 4 Getting Started 6 Canceling the display demonstration Setting the demonstration mode Adjusting the clock Initial settings before operations 8 Adjust [SETTINGS] mode settings Listening to the other external components 9 Listening to a Disc/ USB device/ iPod 10 Before reading this manual, click the button below to check th
PAGE 2
Safety ¤WARNING Stop the car before operating the unit. Important to know... To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. ■■ Caution: Adjust the volume so that you can hear the sound outside the car. Driving with the volume adjusted to a too high level may cause an accident. ■■ Condensation: When the car is airconditioned, moisture may collect on the laser lens. This may cause disc read errors.
PAGE 3
Basic Operations Display window KDC-BT42U KDC-BT32U Ejects the disc PAR VOICE Volume knob iPod Loading slot Detaches the faceplate The following indicator lights up when... ST: A stereo broadcast is received. RDS: R adio Data System service is available. TI: Traffic Information function is turned on. IN: A disc is in the unit. EQ: [PRESET EQ] is set to an EQ mode other than [NATURAL]. (page 22) B.BOOST: [BASS BOOST] is set to [LV1], [LV2] or [LV3].
PAGE 4
CONTENTS Getting Started Canceling the display demonstration The display demonstration is always turned on unless you cancel it. Initial settings before operations Adjusting the clock 1 Press the volume knob to enter [FUNCTION] mode. 2 Turn the volume knob to select [SETTINGS], then press to enter. When you turn on the power (or after you reset the unit), the display shows: [CANCEL DEMO] \ [PRESS] \ [VOLUME KNOB] 1 Press the volume knob. [YES] is selected as the initial setup.
PAGE 5
CONTENTS Listening to the Radio Item Selectable setting (Preset: *) AUTO TP SEEK/ ON *: Automatically searches for a station with better reception when the traffic information’s reception is poor. ATP SEEK ; OFF: Cancels. [TI/NEWS SET/ AF SET/ REGIONAL/ AUTO TP SEEK/ ATP SEEK] is selectable only when the source is “FM”. If other playback source is selected, these settings are selectable under [TUNER SET] item. (page 23) ■■ [LOCAL SEEK/ MONO SET/ PTY SEARCH] is selectable only when the source is “FM”.
PAGE 6
Listening to a Disc/ USB device/ iPod Loading slot Ejects the disc. (“NO DISC” appears and “IN” indicator goes off.) PAR VOICE ■■ ■■ iPod Alphabet Search for iPod Press number button 4 (REP) repeatedly to make a selection. Audio CD : TRACK/TRAC (track) REPEAT, REPEAT OFF Audio File : FILE REPEAT, FOLDER/FOLD (folder) REPEAT, REPEAT OFF iPod : FILE REPEAT, REPEAT OFF Selecting a folder/track/file • Function of KDC-BT42U. 1 Press to enter Music Search mode. “SEARCH” appears.
PAGE 7
CONTENTS Adjust [SETTINGS] mode settings While listening to an iPod or KENWOOD Music Editor media ... 1 Press the volume knob to enter [FUNCTION] mode. 2 Turn the volume knob to select [SETTINGS], then press to enter. 3 Turn the volume knob to select [SKIP SEARCH], then press to enter. 4 Turn the volume knob to make a selection, then press to confirm. 0.5% (initial)/ 1%/ 5%/ 10% : Sets the ratio of skip when searching for a song in Music Search mode.
PAGE 8
Getting Started of Bluetooth PAR VOICE iPod Press and hold to pairing mode. Registering your Bluetooth device with this unit (Pairing) 1 Press and hold to enter pairing mode “PAIRING” is displayed. ■■ Any of the following is displayed depending on Bluetooth device registration condition: ––“PLEASE PAIR YOUR PHONE”: When registering a Bluetooth device for the first time. ––“(device name)”: When a Bluetooth device has already been registered.
PAGE 9
Operation of Hands-Free Phoning Preparation : You need to register your cell-phone before using it with this unit. (page 14) Built-in microphone CONTENTS displayed. – Deleting all entries : “DELETE ALL” is displayed. Press the volume knob. Turn the volume knob to select “YES”, then press to confirm. 3. Press the volume knob. “COMPLETE” is displayed. 4. Press the volume knob to return to Phone Book operation. PAR VOICE ■■ ■■ Press to enter Bluetooth mode. Press to answer an incoming call.
PAGE 10
Switching between Two Connected Cell-phones 1 Press to enter Bluetooth mode. 2 Press and hold . You cannot switch between the connected cell-phones during downloading of the Phone Book. ■■ Only the main cell-phone from which you can make a call. ■■ Both the main and sub cell-phones can receive an incoming call. ■■ If the other cell-phone receives an incoming call while you are talking on the active cell-phone, you must finish the current call to answer the incoming call to the other cell-phone.
PAGE 11
CONTENTS Bluetooth Setup Selecting the Bluetooth Device 3 Start registering this unit by operating SELECT]/ [PHONE SEL] or [AUDIO SELECT]/ [AUDIO SEL], then press to enter. 5 Turn the volume knob to select a Bluetooth device name. 6 Press the volume knob to set up the Bluetooth device. ■■ “✱ (device name)”: The selected Bluetooth device is busy. ■■ “- (device name)”: The selected Bluetooth device is on standby. ■■ “(blank) (device name)“: The Bluetooth device is deselected.
PAGE 12
Function settings 1 Press SRC to select a source other than “STANDBY”. 2 Press the volume knob to enter [FUNCTION] mode. 3 Turn the volume knob to select [AUDIO CONTROL/ AUDIO CTRL] or [SETTINGS], then press to enter. 4 Turn the volume knob to make a selection, then press to confirm. CONTENTS Item DETAILED SET/ DETAIL SET LPF SUBWOOFER/ LPF SUB-W SUB-W PHASE See table below for selection. ■■ Repeat step 4 until the desired item is selected/activated. ■■ Press to return to the previous item.
PAGE 13
Using the remote controller (KCA-RC405) Preparation : KDC-BT42U can also be remotely controlled with an optionally purchased remote controller. Remote sensor ■■ Do not expose to bright sunlight. PAR VOICE iPod Changing the battery of the remote control unit 2 4 3 1 ¤ Caution: ■■ Do not set the remote control in hot places such as on the dashboard. ■■ Lithium battery. Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.
PAGE 14
CONTENTS Installation/connection Part list: A Faceplate....................................................................(×1) B Escutcheon...............................................................(×1) C Mounting sleeve....................................................(×1) D Wiring harness........................................................(×1) E Removal tool...........................................................
PAGE 15
CONTENTS Wiring connection Installing the unit FM/AM antenna input (JASO) USB connector AUX input (Stereo) Use the mini-plug (3.5 mm ø) cable which is stereo type and does not have any resistance. Wiring harness D 1 B Microphone (KCA-MC10 ; optional accessory) D A 2 If no connections are made, do not let the wire come out from the tab. 2 Before attaching, make sure the direction of the escutcheon is correct. (Wider hooks on the bottom side.
PAGE 16
Installing the Microphone Unit (KCA-MC10 ; optional accessory) (KDC-BT42U only) 1 Check the installation position of the microphone. 2 Remove oil and other dirt from the KCA-MC10 (optional accessory) installation surface. 3 Install the microphone. 4 Wire the microphone cable up to the hands-free box with it secured at several positions using tape or the like. ■■ Install the microphone as far away as possible from the cell-phone.
PAGE 17
Bluetooth Symptom Remedy/Cause The hands-free talk volume is low. The hands-free talk volume can be adjusted independently. Adjust it during hands-free talk. [MIC GAIN] of (page 20). No beep is heard at reception of an No beep is heard depending on the type of your cell-phone. The [CALL BEEP] of (page 20) is set ON. ■■ The vehicle window is open. If the surrounding noise is large, voice cannot be recognized Voice is not recognized. properly.
PAGE 18
Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for EU countries that have adopted separate waste collection systems) roducts and batteries with the P symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you.