KDC-BT645U KDC-HD545U CD-RECEIVER INSTRUCTION MANUAL AMPLI-TUNER LECTEUR DE CD MODE D'EMPLOI REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM MANUAL DE INSTRUCCIONES Kenwood Corporation _. • _1M '. . . Designed for Windows @J Media'" €D REA 0 Y ren «t Made for iPod AAC H»Radio® H»RRaAd!Oy® E oBluetooth® Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver.
Contents Before Use 3 Component names and functions 4 General operation 5 Before Using Common Operation Function Setting Operation Music Disc/Audio File/iPod Operation 6 Basic Operation Play function All Random Music Search Music Search for iPod Alphabet Search My Playlist for iPod Audio Filel iPod Setting iPod Control by Hand Mode Direct Music Search Basic Operation of Disc Changer (Optional Accessory) Direct Disc Search Tuner Operation Connecting a Bluetooth Device Making a Call Calling a Numbe
Before Use Notes .AWARNING To prevent injury or fire, take the following precautions: o • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. o Before using this unit for the first time This unit is initially set on the Demonstration mode.
Component names and functions ~ 1_ _ _ _41'_ _ . KI;NWQQO .... .~~ MYUST 2n OJ Release button To turn on this unit and select the Source. To turn off this unit (press the button at least 1 second). [l] Disc slot When inserted a disc (label side up), the source is switched automatically and a song starts playing. [I] Display window [[] [...] button To eject the disc. To select the remove mode, and remove the USB device or an iPod (press the button at least 2 seconds or more).
General operation Before Using Exit ofthe Demonstration Mode Turn off the demonstration mode when you use it for the first time after installation. 1 Press the [VOL] knob to quit the demonstration mode when the messages "CANCEL DEMO" and "PRESS~ "VOLUME KNOB" are displayed (approx. 15 seconds). 2 Turn the [VOL] knob to select "YES" and press the [VOL] knob. Function Setting Operation The basic operating procedure for using this function is described below.
Music Disc/Audio File/iPod Operation Disc slot [~] ~I~~~_I~, I~,'\' 9~1~' .• ~CA-U1EX ]\\1 /' I KENWOOD h '".. ==~=(g=-I:£ii)l:Jlf' 2~Hi13 F"~' ~1I1 [~] / [~] ~'.~~-J-~~. ~ ~ ) 0 \{J, . . ~ ~ required to connect an IPod. [1] - [6] USB Terminal Basic Operation Play function Playing Disc Insert a disc into the disc slot (label side up). Scan play When inserted, the source is switched automatically and a song starts playing. When a disc is inserted, the "IN" indicator lights up.
Cancelling the Music Search mode Function of iPod Press the [ ~ ] button for at least 1 second. All Random All songs in iPod are played at random. Press the [3] button for at least 1 second. Pressing the button toggles the setting between All random play on ("ALL RANDOM") and off ("RANDOM OFF"). Press this button again cancels the Random play. ~ ~ • The time required to turn on the all random function may become longer depending on the number of songs in iPod.
Music Disc/Audio File/iPod Operation Function of iPod You can select the song to play by referring to (page 7) Alphabet Search You can select a song by alphabet. This function searches songs whose name contain the specified character(s) in the list of the selected browse item (artist, album, etc.). 2 Register the song Press the [5] button for at least 2 seconds. "## STORED (Registration number)" is displayed. You can register up to 10 songs. C\ 1 2 3 Q Enter Music Search mo
Audio Filel iPod Setting You can select following setting items. 1 Enter Function Setting mode KDC-BT645U: Press the [VOL] knob for at least 1 second. KDC-HD545U: Press the [VOL] knob. "FUNCTION" is displayed. 2 Select the function item Turn the [VOL] knob and press it when the desired item is displayed. Select "SETTINGS" > Function item.
Function of KDC-BT645U Tuner Operation Tuner Setting You can select following Tuner Setting items. 1 Select the TUNER source KEN'WOOO ..1' (g:a_-I~BIF ' 1 [l+1li] / Press the [SRC] button. Select the "TUNER" display. ,.-•• '.~ 2iEil13f' [~] 2 Enter Function Setting mode Press the [VOL] knob for at least 1 second. "FUNCTION" is displayed. [1] - [6] 3 Basic Operation Selecting Tuner source Press the [SRC] button. Select the "TUNER" display. FUtlethmitem Selects the tuning mode of the radio.
Function of remote control Direct Access Tuning Tuning in a desired radio station by entering the frequency. 1 Enter Direct Access Tuning mode Press the [DIRECT] button. "- - - -" is displayed. 2 Enter the frequency Press the number buttons. Example: 3 Desired frequency . Press bUtton 92.1 MHz (FM) 810 kHz (AM) [91, [21, [1] [81, [1], [0] Tune in to the entered frequency Press the [~] or [~] button. Cancelling Direct Access Tuning Press the [ ~ ] button.
Function of KDC-HD545U KDC-BT645U with KTC-HR300 (Optional Accessory) HD Radio™ Tuner Operation Station Preset Memory Putting a station in the memory. a • 1 Select the frequency to put in the memory Press the [~] or [~] button. 2 Select the number to put in the memory Press the [1] - [6] button for at least 2 seconds. Q., [Q.
4 Make a setting Turn the [VOL] knob and press it when the desired item is displayed. When select "AUTO MEMORY": Turn the [VOL] knob to select "YES'~ and then press the [VOL] knob. When 6 stations that can be received are put in the memory, auto memory entry closes. 5 Exit Function Setting mode Press the [ ~] button for at least 1 second. ~ . * This setting can be made when "TYPE NORi\A,AL" is selected for the "PRESET TYPE" of (page 20) iTunes Tagging Using an iTunes Tagging enabled
Function of KDC-BT645U KDC-HD545U with KCA-BT200 (Optional Accessory) Operation of Hands-Free Phoning ~ ~ • When registering from this unit Refer to (page 23). • For details on the Bluetooth cell-phone with the handsfree function, see (page 33) 2 n n_" 3 _4_ ____ 11 Making a Call [1] - [6] You can select following dialing method. Connecting a Bluetooth Device 1 Enter Bluetooth mode KDC-BT645U: Press the [VOL] knob.
3 4 3 Make a call Select the name Operation type Operation Move to the next phone number. Move to the next name. Turn the [VOL] knob. • Press the [VOL] knob. • Press the [OK] button on the remote controller. ~ ~ • You can input max 25 digits. Press the [i+lII] or [~] bunon. Make a call Press the [VOL] knob. ~ ~ • To use the Phone Book, it must be downloaded to this unit in advance. Refer to (page 24).
Function of KDC-BT645U KDC-HD545U with KCA-BT200 (Optional Accessory) Operation of Hands-Free Phoning Speed Dialing (Preset Dial) Call Waiting 1 Answering Another Incoming Call with the Current Call Suspended 2 Select the number you want to recall from the memory Press the [1] - [6] button. 1 Press the [VOL] knob. Make a call 2 Turn the [VOL] knob and press it when the Press the [VOL] knob. desired item is displayed. Select "ANSWER".
Audio Adjustments "SUB-W LEVEl" You can set subwoofer level. -15-0-+15 "DETAILED SET" Move to detailed item "LPF SUBWOOFER" Selects cut off frequency of subwoofer output. 85/120/160/THROUGH (OFF) Hz "SUB-W PHASE" Selects the phase of subwoofer output. REVERSE (180°)/ NORMAL (00) "SUPREME SET" Turns on/off the supreme function. OFF/ON "VOLUME OFFSET" Sets each source's volume as adifference from the basic volume.
Display Settings In SIRIUS/ SAT source (Optional} [SRC) [VOL] KENWOOD Information Display Channel Name Artist, Composer &Song Category Name Channel Number Clock "CHANNEL NAME" "CH NUMBER" I "CLOCK" In XM source (Optional} Display Selection Changing displayed information on each source following.
Text Scroll Auxiliary Input Display Setting Scrolling the displayed File name, Song title, etc. Selecting the display when changing to Auxiliary input source. KDC-BT645U: Press the [VOICE] button for at least 1 second. KDC-HD545U: Press the [DISP] button for at least 1 second. 1 Select the AUX source Press the [SRC] button. Select the "AU X"I"AUX EXT" display. 2 Display Setting You can select following Display Setting items.
Other Functions 3 Set the Demonstration mode Turn the [VOL] knob and press it when the desired item is displayed. Select "ON" or "OFF': 4 Exit Function Setting mode Press the [ ~ ] button for at least 1 second. Initial Setting Clock Adjustment 1 Turn on this unit. You can select following Initial Setting items. 1 Select the Standby source Press the [SRC] button. Select the "STANDBY" display. Press the [SRC] button. 2 Enter Function Setting mode KDC-BT645U: Press the [VOL] knob for at least 1 second.
"SP SELECT" "FIW UP" Fine-tuning so that the System Qvalue is optimal when setting the speaker type as follows; SP OFF OFF SP 5/4 For 5&4in. speaker SP 6*9/6: For 6&6x9 in. speaker SP OEM: For the OEM speaker Display the firmware version and update the firmware. MEDIA USB Select aUSB device. MEDIA CD: Select CD. For how to update the firmware, access our web site. Ihttp://www.kenwood.com/cs/ce/ i How to Reset Your Unit If the unit fails to operate properly, press the Reset button.
Function of KDC-BT645U KDC-HD545U with KCA-BT200 (Optional Accessory) Bluetooth Setup "AUTO ANSWER" for automatic answer. OFF Does not answer the phone call automatica Ily 0 Automatically answers the phone call at once. 1 1- ~ -99: Automatically answers the phone I call after lapse of 1- 99 seconds. "BT SP SELECT" IYou can specify the audio output speakers. Select the speaker which is further from the microphone in order to prevent howling or echoes.
Registering Bluetooth Device (Pairing) To make your Bluetooth device (cell-phone) usable with this unit, you need to register it (pairing). You can register up to 5 Bluetooth devices to this unit. 2 Enter Special device registration mode Press the [VOL] knob. A list is displayed. 3 Select a device name Turn the [VOL] knob and press it when the desired device name is displayed. If "COMPLETE" is displayed, registration is completed.
Function of KDC-BT645U KDC-HD545U with KCA-BT200 (Optional Accessory) Bluetooth Setup Registering PIN Code Downloading the Phone Book By operating the Bluetooth device, specify the PIN code necessary for registering this unit. Download the phone book data from the cellphone to this unit so that you can use the Phone Book of this unit. 1 Select PIN code edit mode For how to select setup item, refer to (page 22).
Selecting the Bluetooth Device You Wish to Connect When 2 or more Bluetooth devices have already been registered, you need to select the Bluetooth device you wish to use. 1 Downloading the SMS Download the short message (SMS) arrived at the cell-phone so that it can be read on this unit. 1 Select SMS download mode For how to select setup item, refer to (page 22). Select "SETTI NGS" > "SMS DOWNLOAD/~ 2 Enter SMS download mode Press the [VOL] knob. "DOWNLOADING" is displayed.
Function of KDC-BT645U KDC-HD545U with KCA-BT200 (Optional Accessory) BI_uetooth Setup SMS (Short Message Service) Adding a Voice Dialing Command The SMS arrived at the cell-phone is displayed on the receiver. A newly arrived message is displayed. Add a voice tag to the phone book for voice dialing. You can register up to 35 voice tags. ~ 1 Select Phone book name edit mode For how to select setup item, refer to (page 22) . .
Select lIPS NAME CHWI (Play) 6 Press the [VOL] knob. Play the registered voice and return to step 3. Select lIPS NAME DELlI (Delete) ~ ~ • Set the voice tag for all the 5 categories. If the voice tag is not registered for all the categories, the Phone book may not be recalled by voice command. 6 Delete a voice tag Press the [VOL] knob. Exit Phone book name edit mode Press the [ ~ ] button for at least 1 second. e . Audio sound is not output during voice tag registration.
Satellite Radio Tuner Control (Optional Accessory) Satellite Radio Setting You can select following Satellite Radio Setting items. KENWOOD . .:; ". =~~~ ~ .~ .. 1 Select the Satellite Radio source Press the [SRC] button. @j 2_"'_li_313_O_'"_E'_G_31_ _--, [1]- [6] Select the "SAri "SIRIUS"I "XM" display 2 Basic Operation "FUNCTION" is displayed Selecting Satellite Radio source 3 Press the [SRC] button. Select the "SAri "SIRIUS"I"XM" display.
Channel Scan Every receivable Channel is checked for 10 seconds. 1 Enter Channel Scan mode Press the [ Q ] button for at least 1 second. 2 Release it when the channel you want to listen to is received Press the [ Q ] button. Function of remote control Direct Access Tuning Entering the channel and tuning. 1 Enter Direct Access Tuning mode Press the [DIRECT] button. 2 Enter the channel Press the number buttons. 3 Tune in to the entered channel Press the [~] or [~] button.
Basic Operations of Remote Control In iPod/CD/Audio file Source Ir=' VOL '~& I ~ I ~@~ri[f ENT VCJL AI. EXIT AM - J-. - " I::_ I @~~AUD -+----+:_1• •: ,- - - - - - -A't'll'! - - . I Gt-"11 .
In Satellite Radio Tuner Source Preset band select [FM] button [~]/[~] Channel select Recall preset channels button [1] - [6] button Changing the battery of the remote control unit Use a commercially available button battery (CR2025). 1 Insert something narrow like a paperclip into the hole and pullout the battery tray. 2 Insert the battery with the + and - poles aligned properly, following the illustration inside the case. CR2025( +side) ~ ""'.
Appendix About Audio file • Playable Audio file AAC-LC (m4a), MP3 (mp3), WMA (wma) • Playable disc media CD-R/RW/ROM • Playable disc file format • When connecting the USB device, usage of the CA-U 1EX (option) is recommended. Normal playback is not guaranteed when a cable other than the USB compatible cable is used. Connecting a cable whose total length is longer than 5 m can result in abnormal playback. ISO 9660 Level 1/2, Joliet, Romeo, Long file name.
About the Cell-Phone This unit conforms to the following Bluetooth specifications: Version Profile Bluetooth Standard VeL 2.0 HFP (Hands Free Profile) OPP (Object Push Profile) PBAP (Phone book Access Profile) SYNC (Synchronization Profile) For the cell-phones verified for compatibility, access the following URL: http://www.kenwood.
Appendix Function Item List In Standby 1st hierarthy "DISP SELECT"* "SETTINGS" "INITIAL SET" "SETTINGS" 2nd bierarthy 'I'd hier~rdty "CLOCK" "DISPLAY" "CLOCK ADJUST" "DIMMER SET" "TEXT SCROLL" -"BT DVC STATUS"*** "PRESET TYPE" "KEY BEEP" "BUILT-IN AUX" "CD READ" "SP SELECT" "F/W UP" Pag~ 18 20 19 20 I 20 In COl Audio file source lsthierarcby . . ·2ndbietarchy . . . .
Accessories/Installation Procedure with battery wires, the battery may die. Accessories ® If the console has a lid, make sure to install the unit so that the faceplate will not hit the lid when closing and opening. • If the fuse blows, first make sure the wires aren't touching @- to cause a short circuit, then replace the old fuse with one with the same rating . ..........4 ~..........4 Insulate unconnected wires with vinyl tape or other similar material.
connecting Wires to Terminals AUX Input (Stereo) Use the mini-plug cable which is stereo type and does not have any resistance. FrVI/AM antenna Input ,----------------lrr===o::lCI=:J" - = II R }~-~-tLr_ Rear output . . . . . . . . . . . .. . . . .. . . . .. . . .. ... . . . . . Fuse ,....- I, h ~ (lOA)-t:::==~E:d~~ ~ :@O-;-1- Front output f:@Oi--,subwooferoutput oy=--..~i'. e Wiring harness (A ccessory G») To Kenwood disc changer/ External optional accessory ..
Installation/Removing the Unit Non-Japanese Cars Removing the Hard Rubber Frame 1 Engage the catch pins on the removal tool and remove the two locks on the upper level. Upper the frame and pull it forward as shown in the figure. Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. b).. ~ Make sure that the unit is installed securely in place.
Troubleshooting Guide Some functions of this unit may be disabled by some settings made on this unit. Audio file source fJ The sound skips when an Audio file is being played. D . Cannot set up the subwoofer. V The media is scratched or dirty. • Cannot set up the low pass filter. • No output from the subwoofer. ~ • "SUBWOOFER SET" of
Bluetooth audio source KDC-HD545U with KCA-BT200 (Optional) The messages shown below display your systems condition. fJ The Bluetooth audio player cannot be registered TOC ERROR: • No disc has been loaded in the disc magazine. • The CD is quite dirty. The CD is upsidedown. The CD is scratched a lot. ERROR 05 The disc is unreadable. ERROR 77: The unit is malfunctioning for some reason. ¢ Press the reset button on the unit.
Troubleshooting Guide NO MUSIC DATA/ERROR 15 • The connected USB device contains no playable audio file. • Media was played that does not have data recorded that the unit can play USB ERROR: IPod ERROR: Some trouble may have occurred to the connected USB device. l: Remove the USB device, then cycle the power switch to ON. If the same display is repeated, use another USB device. Connection to the iPod has failed. .:::> Remove the USB device and then reconnect it. .:::.
ACAUTION IC (Industry Canada) Notice Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety.
Specifications FM Tuner Section Frequency Range (200 kHz Space) : 87.9 MHz - 107.9 MHz Usable Sensitivity : 11.2dBf (1.0 1.N175 0: SIN = 26dB) KDC-BT645U : 9.3dBf (0.8 1.N175 0: SIN = 30dB) KDC-HD545U Quieting Sensitivity : 19.2dBf (2.5 flV175 (2 DIN SIN = 46dB) KD(-BT645U : 15.2dBf (1.
Bluetooth Section (KDC-BT645U) Version : Bluetooth Ver. 2.0 Certified Frequency Range : 2.402 - 2.480 GHz Output Power : +4dBm (MAX), OdBm (AVE) Power Class 2 Maximum Communication Range : Line of sight approx.l Om (32.
ace:> Esta marca de simbolo indica que Kenwood ha fabricado este producto de manera que reduzca las influencias perjudiciales para el medio ambiente.
MILITARY Unils pUfchaS€d Ihrough lhe U.SA mililary"change service overseas may be serviced under w3nanlv in Ihe continental USA.. subiecllo lhe lollowing condilions.
U,S,A. KENWOOD USA CORPORATION This warranty will be honored only in the USA WHO IS PROTECTED This warranty is elllOlceaDle only Dy the OIlglnal purchase! KENWOOD LIMITED WARRANTY FOR CAR STEREO COMPONENTS WHAT WE WILL PAY FOR HOW LONG IS THE WARRANTY We WIll pay lor all labor and malerlal expenses for cDvereo items. Payment of shipping cnarges is discussed in the nexl Kenwood U.S.A.
