CD-RECEIVER KDC-MP246 KDC-MP146 KDC-MP3046 KDC-MP2046 KDC-MP1046 INSTRUCTION MANUAL © B64-4595-00/00 (MW/M0/CW/C0) B64-4595-00_00_en.indd 1 09.10.
Contents Before Use 3 Appendix 15 Basic Operations 4 Accessories/Installation Procedure 16 Connecting Wires to Terminals 17 Installation/Removing the Unit 18 Troubleshooting Guide 19 Specifications 20 Before Using Common Operation Playing Music Listening Radio General 6 Removing the Faceplate Muting Volume upon Reception of Phone Call Display Indicator Text Display Selection Function Setting 8
Before Use 2WARNING To prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. Before using this unit for the first time This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the Demonstration mode. Refer to (page 4). How to reset your unit • If the unit fails to operate properly, press the Reset button.
Basic Operations Release [SRC] Disc slot [ ] [ ] [BAND] [VOL] [ ] [D] [1][2] [3][4] [5][6] [DISP] [ ] Auxiliary input Before Using Common Operation Exit of the Demonstration Mode Turn off the demonstration mode when you use it for the first time after installation. Power and source select Turns the power ON by pressing the [SRC] button.
Playing Music Listening Radio Playing Disc Insert a disc into the disc slot. When inserted, the source is switched automatically and a song starts playing. Select Tuner source Pressing the [SRC] button several times switches the source to “TUNER”. Folder select Pressing the [BAND] button switches a folder. Song select Pressing the [4] or [¢] button selects a song (track or file). Fast reverses or forwards the music while pressing the [4] or [¢] button. (No sound is output while playing audio file.
General Removing the Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Detach the faceplate Press the Release button. Reattaching the Faceplate Refer to the following diagram when reattaching the faceplate. ¤ • After pressing the Release button, detach the faceplate immediately. If the faceplate is left attached, it can fall due to vibration and so on. • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts.
Display Indicator Text Display Selection p r q 1 “ST“ indicator: Lights when a stereo broadcast is received. 2 “IN“ indicator: Lights when a disc is in the unit. 3 “ “ indicator: Shows the image indicating the operating state of each source or the setting of Audio Control.
Function Setting Perform configuration for this unit. You can set up the following functions. 1 Select a source Press the [SRC] button. Items to be displayed vary depending on the selected source. Refer to the function list shown later. 2 Enter Function Setting mode Press the [VOL] knob. “FUNCTION” is displayed. 3 Select the Function item Turn the [VOL] knob to display your desired item, and then press the [VOL] knob. Repeat the above operation to select the function item to set.
Î Ï Ì Ó Informs you by sound that you forgot to detach the faceplate when ACC is set to OFF. Built in AUX: “BUILTIN AUX” ➤ “ON1”*,”ON2”,”OFF” When this is set to ON, AUX source can be selected. ON1: Outputs the sound of external unit connected to the AUX terminal when switched to AUX source. ON2: Activates the attenuator function when turning on the power with AUX source selected. Turn off the attenuator function when listening to output from external unit.
Function Setting Supplementing is optimized by compression format (MP3 or WMA) and processed according to bit rate. The effect is negligible with music that is encoded at high bit rate, variable bit rate or has minimal high frequency range. Can be set while Audio file source of CD. ¬ Volume offset: “VOL OFFSET” ➤ “- 8” – ”±0” (When in AUX source: ”-8” – ”+8”) Sets each source’s volume as a difference from the basic volume.
Function items appearing when the CD & audio file source is selected “AUDIO CTRL” “SETTINGS” “SUB-W SET” Ò “BASS BOOST” Ú “SYSTEM Q” " “BASS LEVEL” Æ “MID LEVEL” å “TRE LEVEL” ß “BALANCE” ∂ “FADER” ƒ “SUB-W LEVEL” © “DETAIL SET” “CLOCK” “DISPLAY” “LPF SUB-W” ˙ “SUB-W PHASE” Δ “SUPREME SET” ˚ “VOL OFFSET” ¬ “CLOCK ADJ” ¥ “DIMMER SET” ø “TEXT SCROLL” π “DEMO MODE” Function items appearing when an AUX source is selected “AUDIO CTRL” “SETTINGS” “SUB-W SET” Ò “BASS BOOST” Ú “SYSTEM Q” " “BASS LEVEL” Æ
Music Disc/Audio File Operation CD source Play Function Repeat play Press the [4] button. Switches between Track Repeat (“TRAC REPEAT”) and OFF (“REPEAT OFF”) when pressed while playing a CD. Switches between File Repeat (“FILE REPEAT”), Folder Repeat (“FOLD REPEAT”), and OFF (“REPEAT OFF”) when pressed while playing an audio file. Random play Press the [3] button. Randomly plays the music in the disc or folder. When Random Play is turned on, “DISC RANDOM”/ “FOLD RANDOM” is displayed.
Tuner Operation Frequency Step Setting Changing the tuning frequency step. The original setting is FM band 50 kHz, MW band 9 kHz. 1 Turn the power OFF Press the [SRC] button for at least 1 second. 2 Switch the frequency step While pressing the [1] and [5] buttons, press the [SRC] button. Release your fingers from the button after the display appears. The frequency step changes to FM band 200 kHz, and MW band 10 kHz.
Accessory of KDC-MP246/ KDC-MP3046/ KDC-MP2046 Basic Operations of Remote Control In CD/Audio File Source Music select: [4]/[¢] VOL SRC Folder select: [FM+]/[AM–] ATT Pause/Play: [38] ENT Movement between folders/files: [5]/[∞] /O Return to previous folder: [ EXIT AUD AM– FM+ ] Preparing the Remote Control Unit 0—9 DIRECT (page 12) Not used. Pull the battery sheet out from the remote control unit to the direction of the arrow.
Appendix About Audio file • Playable Audio file MP3 (.mp3), WMA (.wma) • Playable disc media CD-R/RW/ROM • Playable disc file format ISO 9660 Level 1/2, Joliet, Romeo, Long file name. Although the audio files are complied with the standards listed above, the play maybe impossible depending on the types or conditions of media. • Playing order of the Audio file In the example of folder/file tree shown below, the files are played in the order from ① to ⑩.
Accessories/Installation Procedure Accessories 1 ..........1 2 ..........2 3 ..........4 4 ..........4 Installation Procedure 1. To prevent a short circuit, remove the key from the ignition and disconnect the - battery. 2. Make the proper input and output wire connections for each unit. 3. Connect the speaker wires of the wiring harness. 4. Connect the wiring harness wires in the following order: ground, battery, ignition. 5. Connect the wiring harness connector to the unit. 6.
Connecting Wires to Terminals AUX input (Stereo) Use the mini-plug cable which is stereo type and does not have any resistance.
Installation/Removing the Unit Non-Japanese Cars Removing the Hard Rubber Frame 1 Engage the catch pins on the removal tool and remove the two locks on the upper level. Upper the frame and pull it forward as shown in the figure. Lock Catch Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. ⁄ Accessory2 Removal tool • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip).
Troubleshooting Guide Some functions of this unit may be disabled by some settings made on this unit. The messages shown below display your systems condition. TOC ERROR: The CD is quite dirty. The CD is upside-down. The CD is scratched a lot. ERROR 05: The disc is unreadable. ERROR 99: The unit is malfunctioning for some reason. ➪ Press the reset button on the unit. If the “ERROR 99” code does not disappear, consult your nearest service center.
Specifications FM tuner section Frequency range 200 kHz space : 87.9 MHz – 107.9 MHz 50 kHz space : 87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 26dB) : 11.2dBf (1 μV/75 Ω) Quieting Sensitivity (DIN S/N = 46dB) : 19.2dBf (2.
