Owner manual

ManualsBrandsKenwood ManualsReceivers and AmplifiersKDC-U7056BT

KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056BTL

English

0. Contents

1. Before use 4

1-1. Safety precaution

1-2. Important information

1-3. Regulatory Compliance

2. Appendix 6

2-1. Trademarks

3. Basic operations 8

3-1. Component names

3-2. Preparations

3-3. How to select the item

3-4. Adjusting the clock

3-5. General operations

4. DSP settings 12

4-1. Audio control

4-2. Manual equalizer control

4-3. Car type selection

4-4. Speaker setting

4-5. X’Over setting

4-6. Listening position setting

4-7. Delay time control

4-8. Channel level ﬁne adjustments

4-9. Resetting of DTA Settings

4-10. DSP preset

4-11. DSP preset recall

5. Listen to the iPod 20

5-1. Models of iPods/iPhones that can be

connected to this unit

5-2. Playing music

5-3. Music search

5-4. Alphabet search

5-5. Direct search

5-6. Skip search

5-7. Skip search ratio setting

5-8. Playback mode

5-9. App & iPod mode setting

6. Pandora® (KDC-U7056DAB/ KDC-

U7056BT) 26

6-1. Requirements Pandora®

6-2. Listening to the Pandora®

6-3. Basic operation

6-4. Station search

6-5. Bookmark registration

6-5. New station registration

6-7. Deletion of station

6-8. Pandora source control

7. Aha Radio 30

7-1. Requirements Aha™

7-2. Listening to the Aha Radio

7-3. Basic operations

7-4. Station search

7-5. Calling a number in the content

7-6. Aha source control

8. Listen to the CD/ Audio ﬁle 34

8-1. Playing music

8-2. Music search

8-3. Skip search

8-4. Skip search ratio setting

8-5. Playback mode

8-6. Direct music search

8-7. About the Audio ﬁle

8-8. About the USB device

8-9. About “KENWOOD Music Editor Light” and

“KENWOOD Music Control”

8-10. About the discs used with this unit

8-11. Handling discs

9. Listen to the tuner 40

9-1. Listening to the radio

9-2. Station preset memory

9-3. Auto memory

9-4. Recall preset station

9-5. Tuner setting

9-6. Direct access tuning

9-7. PTY (Program Type)

9-8. Frequency step setting

10. Listen to the Digital Radio (KDC-

U7056DAB) 46

10-1. Listening to the Digital Radio

10-2. Service preset memory

10-3. Recall preset service

10-4. Service list select

10-5. Alphabet Search for service

10-6. PTY (Program Type)

10-7. Announcement setup

10-8. Replay

10-9. Digital Radio setting

10-10. Digital Radio initial settings

11. Display settings 52

11-1. Selecting a display type

11-2. Information display setting

11-3. Illumination color selection

11-4. Adjusting the Illumination color

11-5. Selecting a text display

11-6. Display & Illumination setting

12. General settings 58

12-1. Adjusting the date

12-2. Clock & date display type setting

12-3. Auxiliary input display setting

12-4. Demonstration mode setting

12-5. Initial settings

13. Registering a Bluetooth 62

13-1. About the Bluetooth module

13-2. Registering a Bluetooth device

13-3. Selecting the Bluetooth device you wish to

connect

13-4. Deleting a registered Bluetooth device

13-5. Bluetooth device registration test

14. Hands-free phoning 66

14-1. Receiving a call

14-2. Calling a number in the phone book

14-3. Dialing a number

14-4. Calling a number in the call log

14-6. Registering in the preset dial number list

14-5. Speed dialing (Preset dial)

14-7. During a call

14-8. Clearing the disconnection message

14-9. Voice Control

14-10. Display of phone number types

(categories)

15. Bluetooth audio 72

15-1. Before use

15-2. Basic operations

15-3. Playback mode

16. Bluetooth settings 74

16-1. Registering the PIN code

16-2. Downloading the phone book

16-3. Deleting the phone book

16-4. Displaying the ﬁrmware version

16-5. Switching between two connected cell-

phones

16-6. Bluetooth detail setting

17. Basic operation of remote control 78

17-1. Before using remote control

17-2. Basic opreation

18. Troubleshooting guide 80

18-1. Setting error

18-2. Operation/wiring error

18-3. Error messages

Summary of content (41 pages)

PAGE 1
0. Contents 1. Before use 4 1-1. Safety precaution 1-2. Important information 1-3. Regulatory Compliance 2. Appendix 6 2-1. Trademarks 3. Basic operations 3-1. 3-2. 3-3. 3-4. 3-5. 8 Component names Preparations How to select the item Adjusting the clock General operations 4. DSP settings 12 4-1. Audio control 4-2. Manual equalizer control 4-3. Car type selection 4-4. Speaker setting 4-5. X’Over setting 4-6. Listening position setting 4-7. Delay time control 4-8.
PAGE 2
1. Before use 1-1. Safety precaution 1-2. Important information 60). 1-3. Regulatory Compliance KDC-U7056BTL # WARNING Before using the this unit for the first time To prevent injuries or a fire, take the following precautions: • Stop the car before operating the unit. • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. This unit is factory-set to operate in the Demonstration mode initially.
PAGE 3
2. Appendix 2-1. Trademarks • The “AAC” logo is a trademark of Dolby Laboratories. • The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners.
PAGE 4
3. Basic operations 3-1. Component names 3-2. Preparations 3-3. How to select the item (10) [E]/ [F] button Press the button to select a song or station. Cancel the Demonstration mode Cancel the Demonstration mode when you use the unit for the first time after installation. For how to select setting items such as a function setting item, see the following example: (11) Release button Press the button to detach the faceplate.
PAGE 5
Basic operations 3-4. Adjusting the clock 3-5. General operations 1 Press [Control] knob. Enters the Function setting mode. 2 Select “Settings” > “Clock&Date” > “Clock Adjust” using [Control] knob. For how to use [Control] knob, refer to <3-3. How to select the item> (page 9). Power Press [SRC] to turn the power ON. Press and hold [SRC] to turn the power OFF. 3 4 Set the hour using [Control] knob. Set the minute using [Control] knob. Exiting from the Function setting mode Press and hold [1/6].
PAGE 6
4. DSP settings 4-1. Audio control “Sound Realizer” You can adjust the audio control items. 1 Press [SRC] to select a source other than Standby (“STANDBY”). Refer to (page 10). 2 Press [Control] knob. Enters the Function setting mode. 3 Select “Audio Control” using [Control] knob. For how to use [Control] knob, refer to <3-3. How to select the item> (page 9).
PAGE 7
DSP settings 4-4. Speaker setting The speaker X’Over is automatically set when the position and size of each speaker are selected from the following items. 5 Select a setting item using [Control] knob. 6 Select a setting value using [Control] knob. Exiting from the Function setting mode Press and hold [1/6]. 4-5. X’Over setting When Speaker network is set to 3 way Fine adjusting the following setting values corresponding to the X’Over values set in the section <4-4. Speaker setting> (page 14).
PAGE 8
DSP settings 4-6. Listening position setting 4-7. Delay time control You can adjust sound localization according to the listening position. Adjusting fine tuning of the speaker position compensation value specified at <4-3. Car type selection> (page 13). 1 2 3 4 Press [SRC] to select a source other than Standby (“STANDBY”). Refer to (page 10). Press [Control] knob. Enters the Function setting mode.
PAGE 9
DSP settings 4-9. Resetting of DTA Settings 4-10. DSP preset 4-11. DSP preset recall You can reset the DTA-compensated values to the factory settings. You can register the values set the DSP control items. You can recall the DSP control items registered to the <4-10. DSP preset> (page 18). 1 Press [SRC] to select a source other than Standby (“STANDBY”). Refer to (page 10). 1 1 Press [SRC] to select a recall source. Refer to (page 10).
PAGE 10
5. Listen to the iPod 5-1.
PAGE 11
Listen to the iPod 5-5. Direct search 5-6. Skip search 5-7. Skip search ratio setting 5-8. Playback mode You can search for music by selecting a browse item and an alphabetic character(s). You can search for a song by skipping songs at the set skip search ratio (the ratio of the number of songs to skip to the total number of songs in the selected list) You can change the ratio of skip performed as mentioned in <5-6. Skip search> (page 22).
PAGE 12
Listen to the iPod 5-9. App & iPod mode setting You can select a music from iPod when App & iPod mode is set to ON. 1 Press [SRC] and select an iPod (“iPod”) source using [Control] knob. Refer to (page 10). 2 Press [Control] knob. Enters the Function setting mode. 3 Select “APP & iPod Mode” using [Control] knob. For how to use [Control] knob, refer to <3-3. How to select the item> (page 9). Selecting “APP & iPod Mode” item each time switching between On and Off.
PAGE 13
6. Pandora® (KDC-U7056DAB/ KDC-U7056BT) 6-1. Requirements Pandora® 6-2. Listening to the Pandora® 6-3. Basic operation 6-4. Station search Requirements for listening to the Pandora® are as follows: Android or BlackBerry Thumbs up Press [R]. You can select the station you want to listen to from your station list. iPhone or iPod touch • Use an Apple iPhone or iPod touch running under iOS3 or later.
PAGE 14
Pandora® 6-5. Bookmark registration 6-5. New station registration 6-7. Deletion of station 6-8. Pandora source control You can register the current track information or artist information in Bookmark. You can search for a desired station. You can register the displayed station as a new station in your station list. You can delete registered station information from your station list. You can turn on/off the Pandora source. 1 Press [Control] knob. Enters the Function setting mode.
PAGE 15
7. Aha Radio 7-1. Requirements Aha™ Requirements for listening to the Aha™ are as follows: iPhone or iPod touch • Use an Apple iPhone or iPod touch running iOS4 or later. • Search for “aha” in the Apple iTunes App Store to find and install the most current version of the Aha™ application on your device. • iPhone/ iPod touch connected to this unit with a KCA-iP102 (optional accessory). Android™ • Use Android OS 2.2 or later. • Download the Aha™ application to your smartphone from the Google Play.
PAGE 16
Aha Radio 7-5. Calling a number in the content 7-6. Aha source control You can call the phone number obtained from the content from a smartphone connected to this unit via Bluetooth. You can turn on/off the aha source. 1 Press [SRC] to select a Standby (“STANDBY”). Refer to (page 10). 1 Press and hold [Control] knob. “Make a call” appears. 2 2 Press [Control] knob. Enters the Function setting mode. Press [Control] knob. Makes a call.
PAGE 17
8. Listen to the CD/ Audio file 8-1. Playing music Playing a disc Open the Disc slot cover upward. Insert a disc in the Disc slot. other than USB, and then remove the USB device. Data contained in the USB device may be damaged if you remove it when it is used as the active source. 8-2. Music search 8-3. Skip search You can select the music you want to listen to from the device or media being played now. (Music Editor media <8-9.
PAGE 18
Listen to the CD/ Audio file 8-4. Skip search ratio setting 8-5. Playback mode 8-6. Direct music search 8-7. About the Audio file (Music Editor media <8-9. About “KENWOOD Music Editor Light” and “KENWOOD Music Control”> (page 38)) You can change the ratio of skip performed as mentioned in <8-3. Skip search> (page 35). You can select a playback mode, such as Random play and Repeat play. (Function of remote control) You can search for music by entering the track number. • Playable Audio files AAC-LC (.
PAGE 19
Listen to the CD/ Audio file 8-8. About the USB device • When the USB device is connected to this unit, it is charged when this unit is powered. • Install the USB device in the place where it will not prevent you from driving your vehicle properly. • You cannot connect a USB device via a USB hub or multi card reader. • Save backups of the audio files used with this unit. The files can be erased depending on the operating condition of the USB device.
PAGE 20
9. Listen to the tuner 9-1. Listening to the radio 9-2. Station preset memory 9-3. Auto memory 9-4. Recall preset station Selecting a tuner source Press [SRC] to select a Tuner (“TUNER”) source. Refer to (page 10). You can store a station in the memory. You can register 18 (FM)/ 6 (AM) stations with good reception automatically. Recall the stations in the memory. Selecting a band (FM or AM) Press [R]. Selecting a station Press [E] or [F]. The seek mode can be changed.
PAGE 21
Listen to the tuner 9-5. Tuner setting You can set up the tuner. 1 Press [SRC] to select a Tuner (“TUNER”) source. Refer to (page 10). 2 Press [Control] knob. Enters the Function setting mode. 3 Select “Settings” using [Control] knob. For how to use [Control] knob, refer to <3-3. How to select the item> (page 9). 4 Select a Tuner setting item using [Control] knob Display “Local Seek”[1] Description Only stations whose reception is good are searched in auto seek tuning.
PAGE 22
Listen to the tuner 9-7. PTY (Program Type) Press [1/6]. (Function of KDC-U7056DAB) You can search for a station by selecting a Program Type. “NO PTY” display • When the selected Program Type is not found, “No PTY” appears. Select another Program Type. 1 Case where this function cannot be used • This function cannot be used during reception of a traffic bulletin or AM broadcast. 2 3 Press [Control] knob. Enters the Function setting mode. Select “Settings” > “PTY Search” using [Control] knob.
PAGE 23
10. Listen to the Digital Radio (KDC-U7056DAB) 10-1. Listening to the Digital Radio 10-2. Service preset memory 10-3. Recall preset service 10-4. Service list select Selecting a tuner source Press [SRC] to select a Digital Radio (“DIGITAL RADIO”) source. Refer to (page 10). You can store a ensemble, service, and component in the memory. Recall the service in the memory. You can select the component you would like to listen to from the service list.
PAGE 24
Listen to the Digital Radio 10-5. Alphabet Search for service 10-6. PTY (Program Type) You can select an alphabetic character from the service list. You can search for a station by selecting a Program Type. 1 2 Press [1/6]. 1 Press and hold [Control] knob. Enter the Alphabet Search mode Press [Control] knob. Enters the Function setting mode. 2 3 3 Select a character using [Control] knob. Exiting from the Alphabet search mode Press and hold [1/6].
PAGE 25
Listen to the Digital Radio 10-8. Replay 10-9. Digital Radio setting 10-10. Digital Radio initial settings You can replay last about 7 minutes (audio bit rate: 128 kbps) of current service. You can set the Digital Radio related items. You can configure initial settings of Digital Radio. 1 Press [Control] knob. Enters the Function setting mode. 1 Press [SRC] to select a Standby (“STANDBY”). Refer to <10-9. Digital Radio setting> (page 50). 2 3 Select “Settings” using [Control] knob.
PAGE 26
11. Display settings 11-1. Selecting a display type 11-2. Information display setting 11-3. Illumination color selection Shown below are examples of display types. You can set the side and graphic parts of the display. You can select the illumination color of the panel. 1 2 3 Press [Control] knob. Enters the Function setting mode. Select “DISP&ILLUMI” > “Display Select” > “Type Select” using [Control] knob. For how to use [Control] knob, refer to <3-3. How to select the item> (page 9).
PAGE 27
Display settings 11-5. Selecting a text display You can change the information displayed on each of the following sources: 1 Press [Control] knob. Enters the Function setting mode. 2 Select “DISP&ILLUMI” > “Display Select” > “Text Select” using [Control] knob. For how to use [Control] knob, refer to <3-3. How to select the item> (page 9). 3 Press [R] or [S] to select a text display part. The selected text display part blinks. 4 Select a text display using [Control] knob.
PAGE 28
Display settings 11-6. Display & Illumination setting “ILLUMI MSC SYNC” You can set the display and illumination. 1 2 3 Press [Control] knob. Enters the Function setting mode. Select “DISP&ILLUMI” using [Control] knob. For how to use [Control] knob, refer to <3-3. How to select the item> (page 9). Select a Display & Illumination setting item using [Control] knob.
PAGE 29
12. General settings 12-1. Adjusting the date 1 Press [Control] knob. Enters the Function setting mode. 2 Select “Settings” > “Clock&Date” > “Date Adjust” using [Control] knob. For how to use [Control] knob, refer to <3-3. How to select the item> (page 9). 3 4 5 12-2. Clock & date display type setting You can set the display type of the clock and calendar. 1 Press [Control] knob. Enters the Function setting mode. 2 Select “Settings” > “Clock&Date” using [Control] knob.
PAGE 30
General settings 12-5. Initial settings “CD Read” You can configure initial settings of this unit. 1 Press [SRC] to select a Standby (“STANDBY”). Refer to (page 10). 2 Press [Control] knob. Enters the Function setting mode. 3 Select “Initial Settings” using [Control] knob. For how to use [Control] knob, refer to <3-3. How to select the item> (page 9). 4 “Built-in AMP” Select an Initial setting item using [Control] knob. Description Set source selection method.
PAGE 31
13. Registering a Bluetooth 13-1. About the Bluetooth module 13-2. Registering a Bluetooth device This unit conforms to the following Bluetooth specifications: You can register your Bluetooth device in this unit. Version • Bluetooth Ver. 2.
PAGE 32
Registering a Bluetooth 13-5. Bluetooth device registration test You can check whether a Bluetooth device can be registered by operating this unit. 1 Press [Ú]. “BT MODE” appears and enter the Bluetooth mode. 2 Select “BT Test Mode” using [Control] knob. For how to use [Control] knob, refer to <3-3. How to select the item> (page 9). 3 Start registering a unit by operating the Bluetooth device. “Please paring your phone” appears. Operate the Bluetooth device to request this unit for connection.
PAGE 33
14. Hands-free phoning 14-1. Receiving a call 14-2. Calling a number in the phone book 14-3. Dialing a number 14-4. Calling a number in the call log 1 Press [Ú]. “BT MODE” appears and enter the Bluetooth mode. Press [Ú]. “BT MODE” appears and enter the Bluetooth mode. 1 1 Press [Ú]. “BT MODE” appears and enter the Bluetooth mode. 2 2 Select “Phone Book” using [Control] knob. For how to use [Control] knob, refer to <3-3. How to select the item> (page 9).
PAGE 34
Hands-free phoning 14-5. Speed dialing (Preset dial) 1 2 Press [Ú]. “BT MODE” appears and enter the Bluetooth mode. Select “Preset Call” using [Control] knob. For how to use [Control] knob, refer to <3-3. How to select the item> (page 9). 3 Turn [Control] knob to select a recall number (“P1” – “P6”). 4 Press [Ú]. Makes a call. Registration of dial number • You need to register the preset dial number. Refer to <14-6. Registering in the preset dial number list> (page 68). 14-6.
PAGE 35
Hands-free phoning 14-9. Voice Control This unit can access the voice recognition function of the connected cell phone. You can search the phone book by voice. (The function depends on the cell phone.) 1 2 Press and hold [Ú]. “Voice Control” appears and enter the Voice control mode. Start speaking. Speak a voice tag, etc. registered in the cell phone. 70 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056BTL 14-10.
PAGE 36
15. Bluetooth audio 15-1. Before use 15-2. Basic operations 15-3. Playback mode • You need to register your Bluetooth audio player before using it with this unit. For more details, see <13-2. Registering a Bluetooth device> (page 62). • You need to select the Bluetooth audio player you wish to connect. Refer to <13-3. Selecting the Bluetooth device you wish to connect> (page 63). Selecting a Bluetooth audio source Press [SRC] to select a Bluetooth audio (“BT AUDIO”) source.
PAGE 37
16. Bluetooth settings 16-1. Registering the PIN code 16-2. Downloading the phone book 16-3. Deleting the phone book By operating the Bluetooth device, specify the PIN code necessary for registering this unit. If the phone book is not downloaded automatically to this unit to which a cell phone − which is not compatible with PBAP − is connected, download it in the following manner: You can delete the phone book stored in this unit to which a cell phone − which is not compatible with PBAP − is connected.
PAGE 38
Bluetooth settings 16-4. Displaying the firmware version You can view the version of the firmware of this unit. 1 Press [Ú]. “BT MODE” appears and enter the Bluetooth mode. 2 Select “Settings” > “Detailed Settings” > “BT F/W Update” using [Control] knob. For how to use [Control] knob, refer to <3-3. How to select the item> (page 9). The firmware version appears. Exiting from the Bluetooth mode Press [Ú]. How to update • For how to update the firmware, access our web site. www.kenwood.
PAGE 39
17. Basic operation of remote control 17-1. Before using remote control 17-2. Basic opreation Preparing the remote control unit On iPod source • Enter Music search mode: [R]/[S] • Movement between items during Music search mode: [R]/[S] • Return to previous item: [6] • Pause/Play: [ENT] Pull the battery sheet out from the remote control unit in the direction of the arrow.
PAGE 40
18. Troubleshooting guide 18-1. Setting error 18-2. Operation/wiring error 18-3. Error messages Some functions of this unit may be disabled by some settings made on this unit. What might seem to be a malfunction in your unit may just be the result of a slight operation error or a wiring error. Before calling for service, first check the following table for possible problems. The messages shown below indicates your system condition. ö Cannot set up display.
PAGE 41
Troubleshooting guide Í Registration of the station has failed. ö “Station limit” Í The number of registered stations has reached the upper limit. ò Retry after deleting an unnecessary station. ö “Rating failed” Í Registration of Thumbs Up/Down has failed. ö “Station SRCH ERR” Í Keyword search has failed. ö “No Stations” Í There is no receivable station. ö “No skips remaining” Í No more skips are allowed now. Retry after a while.