KENWOOD KT-IOOO KT-900 KT-800 Sales Manual PULSE COUNT DETECTOR TUNER
Product policy For over three decades, Kenwood has continually introduced innovations in tuner design and engineering. The name Kenwood has thus become universally recognized for excellence in tuner technology, and many satisfied users will testify that for them, the tuner is Kenwood. But there's a whole lot more to tuners than the technology, these days. The average, non-audiophile also wants to be in on the high quality FM and AM broadcast scene, even though the budget is usually rather restricted.
Independent Power Supply For Local Oscillator One consequence of the relatively high impedance of power supplies is that leakage from the +B line of the power supply unit can feed back to the local oscillator to modulate the local oscillator frequency. This causes tuning inaccuracies by deflecting the tuned frequency above and below its optimum level.
Sales Points Key Specs KT-1000 FM usable sensitivity: 23.3 dBf (8.0>V) in Direct RF Conversion mode 10.3 dBf (1.8/A/) in normal mode FM THD at 1 kHz: 0.03% (mono), 0.04% (stereo) Alternate channel selectivity: 65 dB at 300 kHz (NARROW) 45 dB (WIDE) Stereo separation at 1 kHz: 60 dB (WIDE), 50 dB (NARROW) Signal-to-noise ratio: 90 dB (mono), 85 dB (stereo) Frequency response: 15 Hz to 15 kHz ±0.
Operating Features O Power switch O LOCK/AUTO BLEND/MUTING switch. ©FM REC CAL switch. Built-in tone Activates servo-lock system simultaneoscillator helps achieve accurate recously with automatic muting for weak staord level settings on tape deck. tions to maintain minimum acceptable ©FM/AM IF BAND selector. With Wide noise level. Indicator for "Muting On" and Narrow band settings. Wide-band ©FM RF selector. Direct or Normal RF conversion, with indicator for Normal indicator. setting.
Specifications KT-900 KT-1000 FM TUNER SECTION Usable Sensitivity 50dB Quieting Sensitivity (Mono) (Stereo) Signal to Noise Ratio (Mono) (Stereo) Total Harmonic Distortion Mono 100Hz 1 000Hz 6 000Hz 15 000Hz 50 — 10 000Hz Stereo 100Hz 1 000Hz 6,000Hz 15 000Hz 50 —10 000Hz Capture Ratio Alternate Channel Selectivity Stereo Separation 1 000Hz 50 — 10 000Hz 15 000Hz Frequency Response Spurious Response Ratio Image Response Ratio IF Response Ratio AM Suppression Ratio Subcarrier Product Ratio Antenna Impedan
