MONITOR WITH DVD RECEIVER KVT-819DVD KVT-839DVD INSTRUCTION MANUAL Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new DVD-receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below.
Contents How to read this manual Safety precautions Notes Watching DVD/VCD & DVD Audio Listening Functions During the Playback Screen Functions When Displaying the Easy Control Panel Functions While Displaying the Control Screen DVD Disc Menu VCD Zoom Control Direct Search Music Disc & Audio File Listening Functions When Displaying the Easy Control Panel Functions While Displaying the Control Screen Set Disc Name Folder Select (Function of Audio File) Disc Select (Function of Disc Changer) Direct Search
HD Radio Control Functions When Displaying the Easy Control Panel Functions While Displaying the Control Screen Seek Mode Auto Memory Manual Memory Source Select Displaying the Control Screen 54 54 54 55 56 56 57 58 Muting Audio Volume upon Reception of Phone call 59 Muting Audio Volume upon Reception of Phone Call 59 Setup Menu Setup Menu Audio Setup Crossover Network Setup DVD Setup Language Setup Parental Level Setup DivX Setup iPod Setup Software Information System Setup AV Interface Setup User In
How to read this manual This manual uses illustrations to explain its operations. The displays and panels shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual displays or panels used, or some display patterns may be different. Seek mode Sets a station selection. TUNER 10:10 FM1 98.1 MHz PS FM TI AM CRSC AME SEEK PS 4Line LO.
English 01̲B64-3713-00̲English.indd 5 5 07.2.
Safety precautions 2WARNING Do Not Load 3-in. CDs in the CD slot To prevent injury or fire, take the following precautions: If you try to load a 3 in. CD with its adapter into the unit, the adapter might separate from the CD and damage the unit. • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. • Do not watch or fix your eyes on the unit’s display when you are driving for any extended period.
Notes • If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • We recommend the use of (page 83) to prevent theft. • The characters conforming to ISO 8859-1 character set can be displayed. • The RDS or RBDS feature won’t work where the service is not supported by any broadcasting station.
Notes Handling CDs List of playable discs • Do not touch the recording surface of the CD. • Do not stick tape etc. on the CD, or use a CD with tape stuck on it. • Do not use disc type accessories. • Clean from the center of the disc and move outward. • When removing CDs from this unit, pull them out horizontally. • If the CD center hole or outside rim has burrs, use the CD only after removing the burrs with a ballpoint pen etc.
Region codes in the world The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. 1 5 2 6 1 2 3 1 4 5 2 4 DVD disc marks Operation regulatory marks Symbol With this DVD, some functions of this unit such as the play function may be restricted depending on the location where the DVD is playing. In this case, the following marks will appear on the screen. For more information, refer to the disc manual.
Notes About Audio files • Playable Audio file AAC-LC (.m4a), MP3 (.mp3), WMA (.wma) ⁄ • If music of normal CD and other playback systems are recorded in the same disc, only the playback system recorded at the first setout is played. • Playable AAC file ".m4a" file encoded by AAC-LC format.
• This unit can display the following versions of MP3 ID3 tag: version 1.0/ 1.1/ 2.2 (USB device)/ 2.3 (USB device) • AAC ID3 Tag cannot be displayed. • Contact the sales agent as to whether your USB device conforms to the USB mass storage class specs. • Using an unsupported USB device can result in abnormal playback or display of the audio file. Even if you use the USB device conforming to the above specs, audio files cannot be played normally depending on the type or condition of the USB device.
Basic Operations Operation Common operation When the monitor is open B A C D E B F G When the monitor is closed I H J B Open/Close the monitor Press to open or close the monitor panel • Do not touch the moving components when you are opening or closing the monitor. If you touch the moving components, you may be hurt or the equipment may be damaged. • Do not try to open or close the monitor by hand.
C A Turns power ON/OFF Press the button to turn on the power. When the button is pressed and held down for 1 second or more, the power is turned off. Adjusts the volume I Attenuates the volume Press it again to cancel muting. E J Playing a disc When you load a disc into disc loading slot Ô, the disc starts playing. If a menu appears, when playing a video disc, select the desired item. ⁄ • See (page 8) for a list of supported discs and formats.
Basic Operations A B A Switches the video source The video source switches in the following order each time you press the button. Built-in Disc Player TV Video iPod Rear Camera Navigation You can also turn off the video display by pressing the button longer than 1 second. When you press the button again, the previous video display comes back on. ⁄ • The Rear view camera video is displayed when the vehicle's gear is in "Reverse".
Playing a USB device When connecting a USB device, playback starts automatically. Removing the USB device on the USB control screen to enter the USB suspend mode, and then remove the USB Press device. Refer to (page 43). ¤ • Removing the USB device before entering the USB suspend mode may result in damaging the data in the USB device. ⁄ • If the USB source is selected when a USB device is not connected, "No Device" is displayed.
Basic Operation Basic Operations Common operation B A Sub Display C D E C Switches the function screen The function control screen switches in the following order each time you press the button. Picture & Easy Control Panel Source Control Screen Picture Panel (OFF) The following buttons are always displayed on the source control screen. 6 1 2 3 4 5 5 1 2 3 4 5 6 Displays the Source Select screen. (page 57) Returns to the Source Control screen. Displays the Audio Control Menu screen.
B A Switching Sub Display Theft Deterrent Protection panel Press the [DISP] button to select the screen mode. Shows the status of selected source. The protection panel of the unit can be detached and taken with you, helping to deter theft. C Switches AV OUT source Removing the Protection panel Press the Release button Å. Drawing the protection panel to left side pull it to forward and remove it. Switches the source that is output at the AV OUTPUT terminal when it is pressed more than 1 second.
Watching DVD/VCD & DVD Audio Listening You can play DVD/VCD using various functions. • For the basic method of how to watch DVD/VCD, refer to (page 12). • Set the remote controller mode switch to "DVD" mode before starting operation, refer to (page 92). Functions During the Playback Screen DVD Audio playback screen 8 Basic functions are available even when the playback screen is displayed.
VCD playback screen DVD VCD 15 Scene 16 3 Mode:Full P 0:05 AV–OUT:AV–IN1 19 18 17 Functions When Displaying the Easy Control Panel Displays a floating control panel in the screen. 20 DVD VCD PBC Scene VER2 ST 3 DVD VIDEO Title DVD VIDEO Title Chap 1 Mode:Full 1 Chap 1 T 0:00:05 AV–OUT:AV–IN1 P 0:05 IN AF t Scene/Track Number Display y Play time Display u Forward Scene/Track Search Area Selects the next scene (when PBC is On) or track (when PBC is Off ).
Watching DVD/VCD & DVD Audio Listening Functions While Displaying the Control Screen When playing DVD Audio 10 Switches to control screen to use various playback functions.
r Volume Label Display When is appeared, the text display is scrolled by pressing it. t Function Indicator y Appears when a disc is inserted. u Turns the PBC function of VCD On or Off. (only when VCD Ver 2.0 is in use) DVD Disc Menu Selects an option from the DVD Disc Menu. 1 Display the Disc Menu Control screen DVD VIDEO Title DVD VIDEO Title Chap 1 Mode:Full 1 Chap 1 T 0:00:05 AV–OUT:AV–IN1 18 i Displays the external device control screen. See (page 58).
Watching DVD/VCD & DVD Audio Listening Zoom Control H i g h l i gh t On Me n u Ctrl SUB 3/ 3 Audio Angle Z o om 1/2 1/1 Ex i t ⁄ • To cancel Highlight Control, press [V.SEL] button.
VCD Zoom Control Direct Search Displays an enlarged VCD screen. You can search for a DVD/VCD chapter, scene or track by entering its number. 1 Display the Zoom Control screen 1 Select the Direct Search mode DVD VCD Scene 3 Mode:Full P 0:05 AV–OUT:AV–IN1 4GHI 5JKL 6MNO R.VOL 7PQRS 8TUV 9WXYZ CLEAR 1 DVD VCD Scene PBC VER2 3 P 0:05 ST Z o omC t r l IN AF 2 2 2 0 + DIRECT # BS ATT The following items can be searched directly each time it is pressed.
Music Disc & Audio File Listening You can recall various control screens during CD/Audio file/Disc Changer playback. • For the basic method of how to play a music disc/audio file, refer to (page 12). • Refer to (page 8) for playable discs. • Refer to (page 10) for playable files. Functions When Displaying the Easy Control Panel Displays a floating control panel in the screen. 8 Displays the Screen Control screen.
Functions While Displaying the Control Screen Switches to control screen to use various playback functions. DVD CD Track 5 Mode : F u l l P 0 : 00 A V-OUT: A V - I N 1 SCRN EXT SW SRC DVD CD Track 5 0 : 00 P IN 8 Starts or stops Scan Play (that plays the beginning of each music one after the other). 9 Repeats to play (the present track). p Starts or stops Random Play (to play music in random order). q Switches the number of lines displayed in the Information Display.
Music Disc & Audio File Listening During Audio file playback 32 34 33 38 20 22 21 22 24 25 28 29 35 40 24 26 27 39 23 26 30 31 36 ; Music information display Selects Folder Name, File Name, Title, Artist Name, or Album Name. When is appeared, the text display is scrolled by pressing it. a Ejects a disc. s Fast Forwards or Fast Backwards. (Disabled when a JPEG is being played.) d Stops playing. When pressed twice, the disc is played back from its beginning in the next time.
During playback on disc changer 50 52 51 57 41 58 59 43 42 44 42 43 45 46 47 48 53 49 54 Q Music information display Selects the Disc Name (see , page 28) or Track Text mode for text display. When is appeared, the text display is scrolled by pressing it. W Selects a track. Starts Fast Forward or Fast Backward when it is held down. E Selects a disc. (Function of Disc Changer) R Plays or pauses. T Switches the button display.
Music Disc & Audio File Listening Set Disc Name Folder Select (Function of Audio File) Assigns a name to a CD. Searches folders and Audio files stored in media and devices according to hierarchy. 1 Play a CD you wish to name 1 Start Folder Select 2 Start Name set 2 Selects a song 3 Enter the name See (page 60) for information on how to enter a name. 1 4 End Name set 2 3 4 1 5 1 Scrolls the list.
Disc Select (Function of Disc Changer) Direct Search Displays a list of discs in the Disc changer and allows you to select the disc to listen. Searches for a disc or a track when its number is entered. 1 Start Direct Select During play on the built-in disc player 1 Select the Direct Search mode 4GHI 5JKL 6MNO R.VOL 7PQRS 8TUV 9WXYZ CLEAR 1 DIRECT 0 + # BS ATT The following items can be searched directly each time it is pressed.
Music Disc & Audio File Listening During play of an external disc player or disc changer 1 Enter a disc or track number Y 1 2 ZONE 2ABC 3 DEF 1 4GHI 5JKL 6MNO R.
Video File/Picture File Watching You can recall various control screens during playback of video file (MPEG 1, MPEG 2 and DivX file) and picture file (JPEG file). Functions When Displaying the Easy Control Panel Function During Playback Screen Basic functions are available even when the playback screen is displayed. Displays a floating control panel in the screen. Display the playback screen.
Video File/Picture File Watching Functions While Displaying the Control Screen Switches to control screen to use various playback functions. DVD ME D I A P 0 : 0 0 : 05 A V-OUT: A V - I N 1 1 5 Mode : F u l l PICTURE - SRC DVD ME D I A 9 Starts or stops Scan Play (that plays the beginning of each song or data one after the other). p Repeats to play (the preset files or data). q Starts or stops Random Play (to play files of the present folder in random order).
Picture Control Folder Select Adjusting the video display. Searches folders and Video files/Pictures stored in media and devices according to hierarchy. 1 Start Picture Control 1 Start Folder Select DVD ME D I A PICTURE 1 255 Mode : F u l l P 0 : 0 0 : 00 A V-OUT: A V - I N 1 2 Adjust the video display 2 Select a file Picture Ctrl 2 3 1 1 4 2 3 4 Exit 1 1 2 3 4 Reverses the picture horizontally. Rotates counter clockwise. Rotates clockwise. Ends Picture Control. 5 1 Scrolls the list.
Radio Listening Various control screens appear in the Tuner Source mode. • For the basic method of receiver button operations, refer to (page 12). • Set the remote controller mode switch to "AUD" mode before starting operation, refer to (page 92). Functions When Displaying the Easy Control Panel Functions While Displaying the Control Screen Displays a floating control panel in the screen. Switches to control screen to use various functions.
6 Switches the button display. 7 Turns the CRSC function On or Off. (Only when receiving the FM broadcast) 8 Selects the Auto Memory mode. (Refer to page 36 for the ) 9 Switches the Seek mode. (Refer to page 35 for the ) p Switches the number of lines displayed in the Information Display. 11 q When to buttons appear, you can recall the stations on memory. For memory of broadcasting stations, refer to (page 36) or (page 36).
Radio Listening Auto Memory Manual Memory Stores stations with good reception in memory automatically. Stores the current receiving station in memory. 1 Select a band you wish to store in memory 1 Select a station you wish to store in memory 2 Select the Auto Memory mode 2 Store in memory 3 Start Auto Memory Continue to touch until the memory number appears. Touch or . Auto Memory terminates when 6 stations are stored or when all stations are tuned in.
# : Press for # seconds. Preset Select Radio Text Lists and selects memorized station. You can display the radio text. (Only when receiving the FM broadcast). 1 Start Preset Select 1 Select a station 2 Display the radio text 2 Selects a station 2 3 1 1 1 2 4 1 Scrolls the list. 2 Memorized stations are displayed. Touch to tune in. 3 Switches the list display name to Station name or Program Service Name. 4 Returns to the original screen.
Radio Listening Set Station Name Direct Search Assigns a name to a station. Tunes in a station when its frequency is entered. 1 Select a band 2 Start Name set AV OUT OPEN VIEW MAP DIR SUBTITLE ANGLE O FM+ D O O O ZOOM 2 VOL O AM− Y 1 O 1 Tune in to the station to name 2 ZONE 3 2 Select the Direct Search mode 4 GHI 5JKL 6MNO R.
Traffic Information Search for Program Type When a traffic bulletin starts, any source is switched to the traffic information and it is displayed automatically. A program is tuned when you set its program type. (Only when receiving the FM broadcast) 1 Enter Program Type mode 1 Set the Traffice information mode When the traffic bulletin starts... The Traffic Information screen appears automatically.
iPod Control You can control and listen to songs in your iPod by connecting iPod with video or iPod nano to this unit with KCA-iP300V (optional accessory). You can also display video contents on this unit when connecting an iPod with video. Only one iPod can be connected to this unit. Functions when Displaying the Easy Control Panel Connecting an iPod Connect an iPod to this unit. Displays a floating control panel in the screen.
Functions while Displaying the Control Screen Switches to control screen to use various playback functions. i P od AUTO MAIN ST TI Mode : F u l l P 0:00:00 AV-OUT:AV - I N 1 6 Starts or stops Scan Play (that plays the beginning of each music or video one after the other). 7 Repeats to play (the preset files or data). 8 Starts or stops Random play.
iPod Control iPod List Lists and searches music/video contained in the iPod. 1 Display the iPod List 2 Select music/video 1 2 3 4 1 5 1 Switches list page. 2 Categories and music are listed. Touch a category name to move its lower level. If music title is displayed, the music is played by touching it. If is touched, all the music in its category is played. 3 Returns to previous category. 4 Moves to the top category. 5 Displays the currently playing category.
USB Device Control You can control and listen to songs in your USB device by simply connecting it to the USB connector of this unit. • For the connection of a USB device, refer to (page 12). . Functions when Displaying the Easy Control Panel Functions while displaying the Control Screen Displays a floating control panel in the screen. Switches to control screen to use various playback functions.
USB Device Control 3 Selects a folder. (Only in Folder Select Mode)* 4 Selects a file. 5 Plays or pauses. 6 Switches the button display. 7 Starts or stops Scan Play (that plays the beginning of each music one after the other). 8 Repeats to play (the present music). 9 Starts or stops Random Play (to play music in random order). (Only in Folder Select Mode)* p Switches the number of lines displayed in the Information Display.
Folder Select Searches folders and Audio files stored in the USB device according to hierarchy. 1 Start Folder Select USB 0004/0006 TITLE – P 00:00:05 Music Title ARTIST Artist of the music ALBUM Name of the album + FList AF PList INFO IN EXT SW LOUD 2 Select music USB List 0002/0006 P 00:00:05 Dymmy 1 2 3 Folder Name 4 Folder Name Root Fol Folder Name 1 5 Folder Name Cur Folder Name 6 MUSIC AF IN LOUD 1 Scrolls the list.
TV Watching Various control screens appear in the TV Source mode. (You can only operate TV with the optional accessory TV Tuner connected.) Functions During TV Screen Basic functions are available even when the TV screen is displayed. Functions When Displaying the Easy Control Panel Displays a floating control panel in the screen.
Functions While Displaying the Control Screen Switches to control screen to use various playback functions. TV TV1 Preset 3 Mode : F u l l AUTO1 TV 2ch AV- O U T: AV- I N 1 2ch TV1 IN AUTO1 7 Indicates current Seek mode. 8 Memory Number Display 9 Channel Number Display AF 10 p When to buttons appear, you can recall channels on memory. For memory of broadcasting stations, see (page 48) or (page 48).
TV Watching Auto Memory Manual memory Stores stations with good reception in memory automatically. Stores the current receiving channel in memory. 1 Select a band you wish to store in memory 1 Select a station you wish to store in memory 2 Select the Auto Memory mode 2 Store in memory 3 Start Auto Memory Continue to touch until the memory number appears. Preset Select Lists and selects memorized station.
# 2 Selects a station 1 : Press for # seconds. Direct Search Tunes in a station when its channel number is entered. 1 Select a band CANCEL VOICE OPEN VIEW MAP DIR SUBTITLE ANGLE O FM+ D O O O 1 Memorized stations are displayed. Touch to tune in. ZOOM O ROUTEM AV OUT VOL O AM− Y 2 ZONE 2 Select the Direct Search mode 4GHI 5JKL 6MNO R.VOL Set Station Name 7PQRS 8TUV 9WXYZ CLEAR 1 Assigns a name to a station.
Video Watching Functions When Displaying the Easy Control Panel Displays a floating control panel in the screen. Functions While Displaying the Control Screen VIDEO VIDEO1 Mode : F u l l VIDEO AV-OUT: AV - I N 1 VIDEO1 Mode : F u l l AV-OUT: AV - I N 1 1 VIDEO VIDEO1 IN VIDEO AF VIDEO1 IN AF 1 Video switch Area Switches to Video1/Video2.
Satellite Radio Control (North American sales area only) Various control screens appear in the Satellite radio source mode. (with the optional accessory Satellite radio connected only) Functions When Displaying the Easy Control Panel Functions While Displaying the Control Screen Displays a floating control panel in the screen. Switches to control screen to use various functions.
Satellite Radio Control (North American sales area only) 6 Switches the Seek mode. SEEK 1: Tunes channels one after the other. SEEK 2: Selects channels in memory one after the other. 7 Switches the number of lines displayed in the Information Display. 8 Indicates current Seek mode Channel Search Specifying the desired category and selecting a channel. 1 Start Channel Search 9 9 When to buttons appear, you can recall the channel on memory. For memory of channel stations, see (page 53) .
# : Press for # seconds. Channel Memory Direct Channel Search Stores the current receiving channel in memory. Tuning in by entering the desired channel number. 1 Select a channel you wish to store in memory 2 Store in memory 1 Start Direct Channel Search Displays the Direct Search screen. 2 Enter the channel number 1 2 Continue to touch until the memory number appears. 1 Enters the channel number. 2 Returns to the original screen. 3 Tune in the channel English 01̲B64-3713-00̲English.
HD Radio Control Various control screens appear in the HD Radio Source mode. (with the optional accessory HD Radio tuner connected only) Functions When Displaying the Easy Control Panel Functions While Displaying the Control Screen Displays a floating control panel in the screen. Switches to control screen to use various functions. Mode : F u l l AV-OUT: AV - I N 1 5 SCRN EXT SW 6 1 SRC HD RADIO Mode : F u l l AV-OUT: AV - I N 1 SCRN EXT SW 2 2 HD AM HD FM HD FM 1 3 3 4 SEEK 98.
6 Selects the Auto Memory mode. Refer to (page 56) 7 Switches the Seek mode. Refer to (page 55) 8 Switches the number of lines displayed in the Information Display. Seek Mode Sets a station selection. 9 9 Selects the channel on memory. The mode is switched in following order each time you touch the button. Display "AUTO1" 10 11 12 p The Receive mode switches in the following order.
# HD Radio Control : Press for # seconds. Auto Memory Manual Memory Stores stations with good reception in memory automatically. Stores the current receiving station in memory. 1 Select a band you wish to store in memory 1 Select a station you wish to store in memory 2 Select the Auto Memory mode 2 Store in memory 3 Start Auto Memory Continue to touch until the memory number appears. Auto Memory terminates when 6 stations are stored or when all stations are tuned in.
Source Select The source you wish to listen to can be selected quickly. Displaying the Control Screen 1 Display control screen Press several times until the Control Screen appears. 2 Display source select screen 3 Select a source 2 1 3 4 5 2 1 Switches to the selected source. 2 Scrolls the source display. 3 Displays the external device control screen. See (page 58). 4 Switches the skin. (3 types) 5 Displays the Hands-Free Control screen.
External Device Power Supply Control Controlling the external device power supply. External Device Power Supply Control Controlling the external device power supply. 1 Displays the EXT SW Control screen [EXT SW] appears when the control screen of each source or Easy control panel is displayed. 2 Controls the external device power supply 1 1 2 1 You can turn on or off the external device power supply. 2 Returns to the original screen.
Muting Audio Volume upon Reception of Phone call Muting Audio Volume upon Reception of Phone Call When the telephone is called, the system is paused automatically. When the telephone is called... The Phone Call ("CALL") screen appears, and system is paused. Phone Call ("CALL") screen If you want to continue to listen to the audio source during phone call... The system resumes audio play during the phone call. When the call ends... Hang up the phone. The system resumes playing automatically.
Character Entry How To Use the Character Entry Screen When you select the Set Disc Name mode or others, the following screen appears for character entry. Character Entry screen 1 1 4 3 4 2 5 1 Shifts the cursor. 2 Enters a space. If you erase a character, locate the cursor on it and touch this button. 3 Enters characters. 4 Scrolls up or down the character button display. 5 Exits the Character Entry mode and returns to the previous screen.
Screen Control ⁄ Screen Control • The Screen Control screen is displayed only when you have applied the parking brake. • The picture quality can be set for each source. • You can set image quality of screens such as menu from (page 81) of the . Setting the monitor screen.
Hands Free Unit Control • You need to register your cell-phone to your Bluetooth Hands Free Box beforehand. Make sure to read the instruction manual of the Bluetooth Hands Free Box as well. 9 Control Screen Function Displaying the control screen and using various functions. 10 7 16 11 12 13 2 3 1 Display the control screen 4 5 6 8 Press several times until the Control Screen appears. 2 Display the source select screen 1 1 Displays the status of connection with the cell-phone.
⁄ • While your car is moving, some functions are disabled for safety’s sake. The buttons associated with the disabled functions become ineffective if pressed. • When the Hands-Free Control screen appears, the name of the connected cell-phone is displayed for 5 seconds. • * Since the number of steps of the control unit is different from that of the cell-phone, the statuses displayed on the control unit may discord from those displayed on the cell-phone.
Hands Free Unit Control Quick Dialing Calling by Phone Book You can register up to 3 phone numbers for quick dialing. You can call a person using his/her phone number that you have registered in the Phone Book. To register a phone number: 1 Display a phone number you wish to register 1 Display the Phone Book screen See the (page 64), (page 66) and (page 63). 2 Register the phone number The Initial Input screen appears.
# Phone Book List screen 5 : Press for # seconds. 6 End the call 6 4 4 7 4 5 6 7 Scrolls the list. Enters the destination name. Cancels the operations. Returns to the Hands-Free Control screen. 3 Select a destination you wish to call The previous screen reappears. ⁄ • To use the Phone Book, it must have been downloaded from the cell-phone. For more details, see the instruction manual of your bluetooth Hands Free Box and your cell phone.
Hands Free Unit Control Redialing 3 Confirm the destination You can redial, one of the last 10 phone numbers that you have called or received. 1 Display the Search for Outgoing Calls or Incoming Calls screen The Hands-Free Control screen appears again. The selected destination data is displayed. 4 Make a call : Outgoing Calls : Incoming Calls The Outgoing Calls or Incoming Calls list screen appears. Outgoing Calls or Incoming Calls screen 2 5 1 3 You can start talking when the destination responds.
Setting up the Hands-Free Phone Selecting a Hands-Free Phone The Hands-Free system can be set as follows. You can choose the Hands-Free phone from the list. 1 Display the Hands-Free Set Up screen Hands-Free Set Up screen 1 1 2 2 2 Display the Phone Select list 3 4 5 6 1 Sets an automatic response time after call termination. ( "8") "Off": This function can not use. "0-99": Sets to calling ring time (second). 2 Sets a ringing tone output position.
Hands Free Unit Control ⁄ Deleting the Hands-Free Phone You can cancel a registration of Hands-Free phone. • The Phone Book, outgoing call list, and incoming call list are deleted together with the deleted Hands-Free phone. 1 Display the Hands-Free Set Up screen 2 Display the Phone Delete list Phone Delete screen 1 2 1 Selects the cell-phone to be deleted from the list. 2 Returns to the Hands-Free Set Up screen.
English 01̲B64-3713-00̲English.indd 69 69 07.2.
Setup Menu You can set up various receiver parameters. Setup Menu Audio Setup Displays the Setup Menu to set various functions. You can setup a speaker network, etc. 1 Display the control screen 1 Display the Audio SETUP screen Touch [Audio SETUP] in the SETUP Menu (page 70). ⁄ Press several times until the control screen appears. 2 Display the setup Menu • [Audio SETUP] cannot be selected when no source is selected.
Crossover Network Setup DVD Setup You can set a crossover frequency of speakers. You can set up the DVD play. 1 Select the speaker to set the crossover 1 1 2 2 1 Display the DVD SETUP screen Touch [DVD SETUP] in the SETUP Menu (page 70). 2 Setup each item 3 1 4 5 1 2 3 4 5 Sets the High Pass Filter of the front speaker. Sets the High Pass Filter of the rear speaker. Sets the Low Pass Filter of the sub woofer. Switches to the crossover setup screen. Returns to the original screen.
SETUP menu 6 11 7 12 8 9 6 Sets an angle mark display. ( On) 7 Selects the screen display mode.* ( 16:9) "16:9": Displays wide pictures. "4:3 LB": Displays wide pictures in the Letter Box format (having black stripes at the top and bottom of screen). "4:3 PS": Displays wide pictures in the Pan & Scan format (showing pictures cut at the right and left ends). 8 Displays the Parental Lock screen.* ( Off ) (See , page 73) 9 Keep "Auto" to use.
2 Display the Language SETUP screen Parental Level Setup Sets a parental level. 2 1 Display the Parental Level code number screen 1 3 4 5 1 Enters a language code. 2 Cancels the language setup and returns to the DVD SETUP 1screen. 3 Sets the original audio language. (It appears during Audio Language setup.) 4 Sets the language and returns to the DVD SETUP 1 screen. (It appears after you have entered a language code.) 5 Clears the language code.
SETUP menu 3 Display the Parental Level SETUP screen DivX Setup Checks the registration code. This code is needed when making a disc which has DRM (Digital Rights Management). 1 Display the DivX SETUP screen Touch [DivX SETUP] in the SETUP Menu (page 70). 1 2 4 Select a parental level and complete the setup 7 7 8 1 Displays the registration code. 2 Returns to the original screen. ⁄ • When downloading a DivX VOD file controlled by DRM, register the code appeared on the screen such as the one above.
iPod Setup System Setup Performs setup when using iPod. You can set up the system parameters. 1 Display the iPod SETUP screen 1 Display the System SETUP screen Touch [iPod SETUP] in the SETUP Menu (page 70). 2 Setup each item Touch [System SETUP] in the SETUP Menu (page 70). 2 Setup each item System SETUP 10:10 1 Beep 1 1 2 2 On Off Scroll Manual Auto Remote Sensor 3 On Off CD Read 4 3 1 Sets the Audiobook playback speed. 2 Sets Wide Screen on or off.
SETUP menu System SETUP 10:10 2 Key illumination color 6 Green Display illumination color Blue 7 8 6 Select an illumination color of receiver buttons. ( Red) "Green": Green "Red": Red 7 Select an illumination color of the Sub Display. ( Blue) "Blue": A blue color display. "Key Sync": The same color as the this unit buttn illumination color. 8 Return to the original screen. AV Interface Setup "Off": When the image source is switched, an image entered via the AV INPUT2 port is displayed.
8 You can flip the left and right of the rear view camera video display. Set to "Reverse" and the the rear view will be displayed left and right in mirror image on the screen. ( Off ) User Interface You can set up user interface parameters. 1 Display the User Interface screen Touch [User Interface] in the SETUP Menu (page 70). 2 Setup each item 9 1 10 11 2 3 12 9 Selects speakers used for voice guidance of the navigation system. ( F-Left) "F-Left": Uses the front left side speaker for voice guidance.
SETUP menu 5 6 7 8 9 5 Sets an on-screen display of the iPod Playback screen. ( Auto) "Auto": Information is displayed for 5 seconds when updated. "Manual": Information is displayed when you touch on the screen. 6 Sets an on-screen display of the navigation screen. ( Off ) "Auto": Information is displayed for 5 seconds when updated. "Off": Information is not displayed. 7 Sets an on-screen display of the video1 playback screen. ( Auto) "Auto": Information is displayed for 5 seconds when updated.
Entering Background Background Delete Loads images for background. Deletes the background image. 1 Connect the device which has the image to load 1 Display Delete Image Select screen 2 Display the User Interface screen 2 Select the image to be deleted Background Delete 10:10 Cancel 3 Select the image to load Background Memory 1 10:10 Folder Select usb1 3 sample images1 sample images2 sample images3 1 Root 2 Fol↑ 1 Returns to the original screen.
SETUP menu Background Select Touch panel Adjustment Selects a image for background. You can adjust the touch panel operations. 1 Select Background Select screen 1 Display the Touch panel Adjustment screen Touch [Touch] in the SETUP Menu (page 70). 2 Starts Touch panel setup 2 Select a image for background Background Change 10:10 1 1 2 Default Cancel 1 Returns to the original screen. 3 Adjusts the Touch panel Enter 2 3 1 Returns to the initial background. 2 Returns to the original screen.
Clock Setup Monitor Setup You can adjust the clock time. You can adjust the position, picture quality and the screen mode of the monitor. 1 Display the Clock Setup screen Touch [Clock] in the SETUP Menu (page 70). 1 Displaying the Monitor SETUP screen Touch [Monitor SETUP] in the SETUP Menu (page 70). 2 Setup the Clock 2 3 2 3 2 Setup each item 1 Monitor SETUP Screen Control 10:10 1 BRT 4 5 2 CONT 6 3 BLK 1 2 3 4 Clock time display Adjusts hours. Adjusts minutes. Sets "00" minute.
SETUP menu Monitor SETUP 6 10:10 Angle Control Angle Slide 7 Auto Open-Close 8 On Off r Selects a screen mode of the VIDEO2 playback screen. You can select any of the following screen mode. "Full", "Just", "Zoom", "Normal" t Returns to the original screen. Monitor Action 9 Quick 10 6 Monitor Angle Adjustment 7 Forward/Backward Monitor Position Adjustment 8 Monitor Open/Close Setup When turned "On", the monitor is opened or closed automatically when you turn on or off the ignition key.
Full picture mode (Full) Security Code Setup You can set a security code to protect your receiver system against theft. ⁄ Zoom picture mode (Zoom) • When the Security Code function is activated, the code cannot be changed and the function cannot be released. Note, the Security Code can be set as the 4 digit number of your choice. 1 Display the Security Code Setup screen Touch [Security] in the SETUP Menu (page 70).
SETUP menu 3 Enter a security Code If you have pressed the Reset button or if you have disconnected the Receiver from battery... 1 Enter the correct security code Input four-digit number. 4 Register your security code You must enter the same security code as that you have entered in Step 3. 2 Enter the security code 5 Reenter the security code Reenter the same security code as that you have entered in Step 3 for confirmation.
Deactivating Security Code SAT ESN Watch Setup To deactivate the Security Code function. You can display the SAT ID. (with the optional accessory Satellite radio connected only) 1 Display the Security Code Setup screen Touch [Security] in the SETUP Menu (page 70). Touch [SAT ESN Watch] in the SETUP Menu (page 70).
SETUP menu ⁄ 2 Start Set Up Memory • For the model name of amp you can control from the system, see the amp’s catalog. • For the options and values you can change and for the amp’s operation when changed, see the amp’s instruction manual. Setup Memory Audio Set Up and AV Interface settings can be memorized. The memorized settings can be recalled at any time. For example, even when the settings are cleared due to replacement of the battery, the settings can be restored.
When recalling the memorized settings: Setting EXT SW Control 1 (EXT SW1) 1 2 3 4 Touching the screen displays a confirmation message. Touch Yes . To cancel recalling, touch No . When clearing the currently memorized settings: 1 Sets the name of the external device. See (page 60) for information on how to enter the name. 2 Sets the power signal output mode. ( EXT SW1: Pulse, EXT SW2: Level) Pulse: Generates a single power signal pulse. Level: Continues output of high power signal.
Audio Control Audio Control Menu Audio Control Displays the Audio Control menu to set the sound effect function of this unit. You can adjust the front/rear and right/left audio balance. 1 Display the control screen 1 Display Audio Control Press several times until the control screen appears. 2 Display the Audio Control menu Touch [Audio Control] in the Audio Control Menu (page 88).
Equalizer Control You can set up the equalizer. 1 Display Equalizer Control 6 7 8 9 10 6 Adjusts the bass boost of the B.M.S power amplifier (optional accessory). 7 Sets the center frequency of bass boost you have set for "AMP Bass". If you set the center frequency to "Low", it will be dropped approximately 20% to 30%. 8 Adjusts the subwoofer volume. 9 Adjusts the volume of the present source based on the difference level of original volume. p Returns to the original screen.
Audio Control Tone Setup Zone Control You can set a Tone curve. You can set the front and rear audio source. 1 Display the Tone screen 1 Display Zone Control See (page 89). Touch [Zone Control] in the Audio Control Menu (page 88). 2 Set the Tone 5 1 6 2 7 3 8 4 1 2 3 4 5 6 7 8 9 90 9 Bass adjustment items are displayed. Middle adjustment items are displayed. Treble adjustment items are displayed.
⁄ • When the rear speaker sound is switched, the audio source that is output at the AV OUTPUT terminal is also switched to the same source. However, if you have set the "Area" to "Reverse", the audio source that is output at the AV OUTPUT terminal is switched depending on the front sound source. 4 Adjusts the volume of the rear channel. (This button appears when the Zone function is On.) 5 Returns to the original screen. ⁄ • There are following limitations when zone function is set to "On".
Remote Controller This unit can be operated using the Remote Controller supplied with the unit. ¤ • Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could result, if the Remote Controller falls down and gets wedged under the pedals while driving. • Do not place the battery near an open flame or heat source. This may cause the battery to explode. • Do not recharge, short, break up or heat the battery or place it in an open fire.
Common operations (AUD mode) Source switching Switches to the source to be played. OPEN Opens or closes the monitor each time you press the key. O ZOOM IN V.SEL AV OUT OPEN VIEW MAP DIR O O Volume control Adjusts the volume. ANGLE D Cursor key Moves the cursor when displaying menu. OUT ANGLE O O O O D ZOOM O Y O TV• • AUDIO RETURN MODE/TOP MENU FNC/MENU/PBC 2 ZONE ENTER Enters options.
Remote Controller DVD/DVD Audio/VCD/CD/Audio files (DVD mode) Folder search Selects the folder to be played. ANGLE FM+ O O O D O O Y 1 * You may not be able to use this function with some discs or scenes. VOL ZOOM AM− Group number Track number Item number* Cancel O DVD Audio 2 ZONE 2ABC 3 DEF 1 CD Track search and file search Selects the track or file to be played.
O O ROUTEM CANCEL VOICE AV OUT OPEN VIEW MAP DIR TV• • NAVI AUDIO RETURN SUBTITLE Switching Band/Video Switches between the station of the TV band to receive and video input. ROUTEM O O O MODE/TOP MENU FNC/MENU/PBC • TV• • NAVI MAP DIR SUBTITLE ANGLE FM+ D O O O ENTER OPEN VIEW O DVD Menu Displays the DVD menu. Turns the playback control on or off while playing VCD.
Remote Controller Radio (AUD mode) NAVI (NAVI mode) Band switching Switches to bands received by the unit. Joystick Scrolls the map, or moves the cursor. Y 1 OUT IN O VIEW O O O Y IN POSITION AUD VOL O O 1 ZOOM AM− OUT O D O FM+ ZOOM MENU ANGLE TV• • ENTER Performs the selected function. MAP DIR O • DVD • NAVI AUDIO RETURN MODE/TOP MENU FNC/MENU/PBC Station selection Switches to broadcast stations received by the unit.
O ENTER O ROUTEM Displays Route Option menu. O MODE/TOP MENU FNC/MENU/PBC ROUTEM VOICE AV OUT OPEN VIEW MAP DIR • TV• • NAVI AUDIO RETURN CANCEL SUBTITLE ANGLE O VIEW Switches between 2D and 3D map displays.
Help? Troubleshooting Some functions of this unit may be disabled by some settings made on this unit. ! • Cannot set up the subwoofer. • Cannot set up subwoofer phase. • No output from the subwoofer. • Cannot set up the low pass filter. • Cannot set up the high pass filter. ▲ Subwoofer is not set to On. ☞
HD Radio source ? No sound can be heard, or the volume is low. ✔ The preset broadcast station is not transmitting in the mode that was set with (page 54). ☞ Please set the receive mode setting to "Auto". ✔ In digital AM broadcasting, receive mode switches between stereo and monaural too often. ☞ Receiving condition is bad or unstable. Stereo is chosen when receiving condition is good, and it switches to monaural when the condition becomes bad.
Help? Error When the unit fails to operate correctly, the cause of the failure appears on the display. Protect : Protective circuit has been activated because a speaker cord has shorted or it has come in contact with the car chassis. Error 07–67: The unit is not operating correctly due to some reason or other. ➡ Push the unit's Reset button. If the "Error 07−67" message does not disappear, see your nearest Kenwood dealer. ➡ Wire or insulate the speaker cord as appropriate and then push the Reset button.
DVD Language Codes Code Language Code Language Code Language aa ab af am ar as ay az ba be bg bh bi bn bo br ca co cs cy da de dz el en eo es et eu fa fi fj fo fr fy ga gd gli gn gu ha he hi hr hu hy ia ie ik id Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutani Greek English Esperanto Spanish Estonian Basque Persian Finnish Fiji Faroese French Frisian Irish
Specifications Monitor section USB IF section Picture size : 6.97 inches (diagonal) wide 154.1 x 87.1 mm Display system : Transparent TN LCD panel Drive system : TFT active matrix system Number of pixels : 336,960 (480H×234V×RGB) Effective pixels : 99.99 % Pixel arrangement : RGB striped arrangement Back lighting : Cold Cathode Fluorescent Tube USB Standard : USB 1.1 / 2.
Video section General Color system of external video input : NTSC External video input level (RCA jacks) : 1 Vp-p/ 75 Ω External audio max input level (RCA jacks) : 2 V/ 25 kΩ Analog RGB input : 0.7 Vp-p/ 75 Ω Video Output level (RCA jacks) : 1 Vp-p/ 75 Ω Audio Output level (RCA jacks) : 1.2 V/ 10 kΩ Operating voltage : 14.
2CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. Kenwood Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI TOKYO, JAPAN KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0.21 CFR 1040. 10, CHAPTER 1, SUBCHAPTER J.